Merge pull request #2613 from FlightControl-Master/master-ng

Merge

Moose Development/Moose/Core/Base.lua

@@ -735,6 +735,12 @@ do -- Event Handling
   -- @function [parent=#BASE] OnEventPlayerEnterAircraft
   -- @param #BASE self
   -- @param Core.Event#EVENTDATA EventData The EventData structure.
+
+  --- Occurs when an option is changed for an AI group.
+  -- The event identifies the initiating group, but does not provide the option ID or value.
+  -- @function [parent=#BASE] OnEventGroupChangeOption
+  -- @param #BASE self
+  -- @param Core.Event#EVENTDATA EventData The EventData structure.
   
   --- Occurs when a player creates a dynamic cargo object from the F8 ground crew menu.
   -- *** NOTE *** this is a workarounf for DCS not creating these events as of Aug 2024.
@@ -855,7 +861,7 @@ end
 -- @param DCS#Time EventTime The time stamp of the event.
 -- @param DCS#Object Initiator The initiating object of the event.
 function BASE:CreateEventTakeoff( EventTime, Initiator )
-  self:F( { EventTime, Initiator } )
+  --self:F( { EventTime, Initiator } )
 
   local Event = {
     id = world.event.S_EVENT_TAKEOFF,
@@ -880,6 +886,22 @@ end
   
     world.onEvent(Event)
   end  
+
+  --- Creation of a `S_EVENT_GROUP_CHANGE_OPTION` event.
+  -- @param #BASE self
+  -- @param DCS#Time EventTime The time stamp of the event.
+  -- @param DCS#Group Initiator The initiating group of the event.
+  function BASE:CreateEventGroupChangeOption( EventTime, Initiator )
+    self:F( { EventTime, Initiator } )
+
+    local Event = {
+      id = EVENTS.GroupChangeOption,
+      time = EventTime,
+      initiator = Initiator,
+    }
+
+    world.onEvent( Event )
+  end
   
     --- Creation of a S_EVENT_NEW_DYNAMIC_CARGO event.
   -- @param #BASE self

Moose Development/Moose/Core/Database.lua

@@ -1380,12 +1380,12 @@ function DATABASE:_RegisterDynamicGroup(Groupname)
       local DCSUnitName = DCSUnit:getName()
   
       -- Add unit.
-      self:I(string.format("Register Unit: %s", tostring(DCSUnitName)))
+      self:T(string.format("Register Unit: %s", tostring(DCSUnitName)))
       self:AddUnit( tostring(DCSUnitName), true )
   
     end
   else
-    self:E({"Group does not exist: ", DCSGroup})
+    self:T({"Group does not exist: ", DCSGroup})
   end
   return self
 end
@@ -1488,27 +1488,28 @@ end
 -- @return #DATABASE self
 function DATABASE:_RegisterAirbase(airbase)
   
-  local IsSyria = UTILS.GetDCSMap() == "Syria" and true or false
-  local countHSyria = 0
+  --local IsSyria = UTILS.GetDCSMap() == "Syria" and true or false
+  --local countHSyria = 0
   
   if airbase then
 
     -- Get the airbase name.
     local DCSAirbaseName = airbase:getName()
     
-    -- DCS 2.9.8.1107 added 143 helipads all named H with the same object ID ..
+    --[[ DCS 2.9.8.1107 added 143 helipads all named H with the same object ID ..
     if IsSyria and DCSAirbaseName == "H" and countHSyria > 0 then
-      --[[
+      --
       local p = airbase:getPosition().p
       local mgrs = COORDINATE:New(p.x,p.z,p.y):ToStringMGRS()
       self:I("Airbase on Syria map named H @ "..mgrs)
       countHSyria = countHSyria + 1
       if countHSyria > 1 then return self end
-      --]]
+      --
       return self
     elseif IsSyria and DCSAirbaseName == "H" and countHSyria == 0 then
       countHSyria = countHSyria + 1
     end
+    --]]
     
     -- This gave the incorrect value to be inserted into the airdromeID for DCS 2.5.6. Is fixed now.
     local airbaseID=airbase:getID()

Moose Development/Moose/Core/Event.lua

@@ -278,6 +278,7 @@ EVENTS = {
   SimulationUnfreeze        = world.event.S_EVENT_SIMULATION_UNFREEZE or -1, 
   HumanAircraftRepairStart  = world.event.S_EVENT_HUMAN_AIRCRAFT_REPAIR_START or -1, 
   HumanAircraftRepairFinish = world.event.S_EVENT_HUMAN_AIRCRAFT_REPAIR_FINISH or -1,
+  GroupChangeOption         = world.event.S_EVENT_GROUP_CHANGE_OPTION or -1,
   -- dynamic cargo
   NewDynamicCargo           = world.event.S_EVENT_NEW_DYNAMIC_CARGO or -1,
   DynamicCargoLoaded        = world.event.S_EVENT_DYNAMIC_CARGO_LOADED or -1,
@@ -291,23 +292,25 @@ EVENTS = {
 --
 --   * A (Object.Category.)UNIT : A UNIT object type is involved in the Event.
 --   * A (Object.Category.)STATIC : A STATIC object type is involved in the Event.
+--   * A GROUP : A DCS Group object is involved in the Event.
 --
 -- @type EVENTDATA
 -- @field #number id The identifier of the event.
 --
--- @field DCS#Unit initiator (UNIT/STATIC/SCENERY) The initiating @{DCS#Unit} or @{DCS#StaticObject}.
+-- @field DCS#Unit initiator (UNIT/STATIC/SCENERY/GROUP) The initiating @{DCS#Unit} or @{DCS#StaticObject}. For `S_EVENT_GROUP_CHANGE_OPTION`, this is a DCS Group.
 -- @field DCS#Object.Category IniObjectCategory (UNIT/STATIC/SCENERY) The initiator object category ( Object.Category.UNIT or Object.Category.STATIC ).
 -- @field DCS#Unit IniDCSUnit (UNIT/STATIC) The initiating @{DCS#Unit} or @{DCS#StaticObject}.
 -- @field #string IniDCSUnitName (UNIT/STATIC) The initiating Unit name.
 -- @field Wrapper.Unit#UNIT IniUnit (UNIT/STATIC) The initiating MOOSE wrapper @{Wrapper.Unit#UNIT} of the initiator Unit object.
 -- @field #string IniUnitName (UNIT/STATIC) The initiating UNIT name (same as IniDCSUnitName).
--- @field DCS#Group IniDCSGroup (UNIT) The initiating {DCSGroup#Group}.
--- @field #string IniDCSGroupName (UNIT) The initiating Group name.
--- @field Wrapper.Group#GROUP IniGroup (UNIT) The initiating MOOSE wrapper @{Wrapper.Group#GROUP} of the initiator Group object.
--- @field #string IniGroupName UNIT) The initiating GROUP name (same as IniDCSGroupName).
+-- @field DCS#Group IniDCSGroup (UNIT/GROUP) The initiating @{DCS#Group}.
+-- @field #string IniDCSGroupName (UNIT/GROUP) The initiating Group name.
+-- @field Wrapper.Group#GROUP IniGroup (UNIT/GROUP) The initiating MOOSE wrapper @{Wrapper.Group#GROUP} of the initiator Group object.
+-- @field #string IniGroupName (UNIT/GROUP) The initiating GROUP name (same as IniDCSGroupName).
+-- @field DCS#Group.Category IniGroupCategory (GROUP) The category of the initiating group.
 -- @field #string IniPlayerName (UNIT) The name of the initiating player in case the Unit is a client or player slot.
 -- @field #string IniPlayerUCID (UNIT) The UCID of the initiating player in case the Unit is a client or player slot and on a multi-player server.
--- @field DCS#coalition.side IniCoalition (UNIT) The coalition of the initiator.
+-- @field DCS#coalition.side IniCoalition (UNIT/GROUP) The coalition of the initiator.
 -- @field DCS#Unit.Category IniCategory (UNIT) The category of the initiator.
 -- @field #string IniTypeName (UNIT) The type name of the initiator.
 --
@@ -734,6 +737,12 @@ local _EVENTMETA = {
      Side = "I",
      Event = "OnEventHumanAircraftRepairFinish",
      Text = "S_EVENT_HUMAN_AIRCRAFT_REPAIR_FINISH"
+   },
+     [EVENTS.GroupChangeOption] = {
+     Order = 1,
+     Side = "I",
+     Event = "OnEventGroupChangeOption",
+     Text = "S_EVENT_GROUP_CHANGE_OPTION"
    },
    -- dynamic cargo
      [EVENTS.NewDynamicCargo] = {
@@ -1234,7 +1243,16 @@ function EVENT:onEvent( Event )
 
       if Event.initiator then
 
-        Event.IniObjectCategory = Object.getCategory(Event.initiator)
+        if Event.id == EVENTS.GroupChangeOption then
+          Event.IniDCSGroup = Event.initiator
+          Event.IniDCSGroupName = Group.getName(Event.initiator)
+          Event.IniGroupName = Event.IniDCSGroupName
+          Event.IniGroup = GROUP:FindByName(Event.IniDCSGroupName)
+          Event.IniCoalition = Group.getCoalition(Event.initiator)
+          Event.IniGroupCategory = Group.getCategory(Event.initiator)
+        else
+          Event.IniObjectCategory = Object.getCategory(Event.initiator)
+        end
         
         if Event.IniObjectCategory == Object.Category.STATIC then
           ---
@@ -1453,7 +1471,12 @@ function EVENT:onEvent( Event )
       -- Weapon.
       if Event.weapon and type(Event.weapon) == "table" and Event.weapon.isExist and Event.weapon:isExist() then
         Event.Weapon = Event.weapon
-        Event.WeaponName = Event.weapon:isExist() and Event.weapon:getTypeName() or "Unknown Weapon"
+        if Event.weapon_name == "ZELL Booster" then 
+          Event.WeaponName = "ZELL Booster"
+        else
+          Event.WeaponName = Event.weapon:isExist() and Event.weapon.getTypeName and Event.weapon:getTypeName() or "Unknown Weapon"
+        end
+        if Event.weapon_name == "ZELL Booster" then Event.WeaponName = "ZELL Booster" end
         Event.WeaponUNIT = CLIENT:Find( Event.Weapon, '', true ) -- Sometimes, the weapon is a player unit!
         Event.WeaponPlayerName = Event.WeaponUNIT and Event.Weapon.getPlayerName and Event.Weapon:getPlayerName()
         --Event.WeaponPlayerName = Event.WeaponUNIT and Event.Weapon:getPlayerName()

Moose Development/Moose/Core/Menu.lua

@@ -869,10 +869,21 @@ do
       local MenuTable = {}
       for MenuText, Menu in pairs( self.Menus or {} ) do
         local tag = Menu.MenuTag or math.random(1,10000)
-        MenuTable[#MenuTable+1] = {Tag=tag, Enty=Menu}
+        MenuTable[#MenuTable+1] = {Tag=tag, Entry=Menu}
       end
-      table.sort(MenuTable, function (k1, k2) return k1.tag < k2.tag end )
-      for _, Menu in pairs( MenuTable ) do
+      local function SortTable(k1,k2)
+        if not k1 then
+          if not k2 then return true else return false end
+        elseif not k2 then
+         if not k1 then return true else return false end
+        else
+          return (k1.Tag or 15) <= (k2.Tag or 15)
+        end
+        return false
+      end
+      table.sort(MenuTable, SortTable)
+      --table.sort(MenuTable, function (k1, k2) return (k1.tag or 15) <= (k2.tag or 15) end )
+      for _, Menu in ipairs( MenuTable ) do
         Menu.Entry:Refresh()
       end
     end

Moose Development/Moose/Core/ScheduleDispatcher.lua

@@ -375,3 +375,13 @@ function SCHEDULEDISPATCHER:NoTrace( Scheduler )
   Scheduler.ShowTrace = false
 end
 
+--- Helper for memory cleanup for self stopping schedulers
+-- @param #SCHEDULEDISPATCHER self
+-- @param Core.Scheduler#SCHEDULER Scheduler Scheduler object.
+-- @param #string CallID (Optional) Scheduler Call ID.
+function SCHEDULEDISPATCHER:_Reclaim( Scheduler, CallID )
+  self:Stop( Scheduler, CallID )                          -- remove DCS timer, nil ScheduleID
+  if self.Schedule[Scheduler] then self.Schedule[Scheduler][CallID] = nil end
+  self.ObjectSchedulers[CallID]     = nil
+  self.PersistentSchedulers[CallID] = nil
+end

Moose Development/Moose/Core/Set.lua

@@ -62,7 +62,8 @@ do -- SET_BASE
   -- @field #table List Unused table.
   -- @field Core.Scheduler#SCHEDULER CallScheduler
   -- @field #SET_BASE.Filters Filter Filters
-  -- @field #booleaen filterNoRegex If true, FilterPrefix ignores special characters and evaluates plain string.
+  -- @field #boolean filterNoRegex If true, FilterPrefix ignores special characters and evaluates plain string. Defaults to false.
+  -- @field #boolean filterReplaceDash If true then if filterNoRegex is false, replace dashes with regex pattern friendly pattern. Defaults to true
   -- @extends Core.Base#BASE
 
   --- The @{Core.Set#SET_BASE} class defines the core functions that define a collection of objects.
@@ -102,6 +103,7 @@ do -- SET_BASE
         },
       },
     filterNoRegex=false,
+    filterReplaceDash=true,
   }
 
   --- Filters
@@ -256,7 +258,8 @@ do -- SET_BASE
   -- @return #boolean Returns `true`, if the pattern is contained in the name and false otherwise.
   function SET_BASE:_SearchPattern(Name, Pattern, NoRegex, ReplaceDash)
     NoRegex=NoRegex or self.filterNoRegex
-    if ReplaceDash==true then
+    ReplaceDash=ReplaceDash or self.filterReplaceDash
+    if ReplaceDash==true and NoRegex ~= true then
       -- Not sure why "-" is replaced by "%-" ?! - So we can still match group names with a dash in them
       -- reason is that the string is interpreted as a pattern and "-" is a special character then. For interpreting it as a string, fourth parameter needs to be set to true.
       Pattern=Pattern:gsub("-", "%%-")
@@ -265,6 +268,16 @@ do -- SET_BASE
     return contain
   end  
   
+  ---Set Regex Options for FilterPrefix function.
+  -- @param #SET_BASE self
+  -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+  -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+  -- @return #SET_BASE self
+  function SET_BASE:FilterSetRegex(NoRegex,ReplaceDash)
+    if NoRegex ~= nil then self.filterNoRegex = NoRegex end
+    self.filterReplaceDash = ReplaceDash or true
+    return self
+  end
 
   --- Gets the Set.
   -- @param #SET_BASE self
@@ -1198,7 +1211,21 @@ do
     -- @param #SET_GROUP self
     -- @return #SET_GROUP self
     
-    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_GROUP] FilterSetRegex
+    -- @param #SET_GROUP self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_GROUP self
+  
+    --- Builds a set of objects of same coalitions.
+    -- Possible current coalitions are red, blue and neutral.
+    -- @function [parent=#SET_GROUP] FilterCoalitions
+    -- @param #SET_GROUP self
+    -- @param #string Coalitions Can take the following values: "red", "blue", "neutral" and coalition.side.RED, coalition.side.BLUE,coalition.side.NEUTRAL
+    -- @param #boolean Clear If `true`, clear any previously defined filters.
+    -- @return #SET_GROUP self
+  
   end
   
   --- Get a *new* set table that only contains alive groups.
@@ -2116,7 +2143,7 @@ do
     if self.Filter.GroupPrefixes and MGroupInclude then
       local MGroupPrefix = false
       for GroupPrefixId, GroupPrefix in pairs(self.Filter.GroupPrefixes) do
-        if self:_SearchPattern(MGroup:GetName(), GroupPrefix, false, true) then
+        if self:_SearchPattern(MGroup:GetName(), GroupPrefix, self.filterNoRegex, self.filterReplaceDash) then
           MGroupPrefix = true
         end
       end
@@ -2337,6 +2364,26 @@ do -- SET_UNIT
     -- @param #SET_UNIT self
     -- @return #SET_UNIT self
     
+    --- Filter the set once
+    -- @function [parent=#SET_UNIT] FilterOnce
+    -- @param #SET_UNIT self
+    -- @return #SET_UNIT self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_UNIT] FilterSetRegex
+    -- @param #SET_UNIT self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_UNIT self
+    
+    --- Builds a set of objects of same coalitions.
+    -- Possible current coalitions are red, blue and neutral.
+    -- @function [parent=#SET_UNIT] FilterCoalitions
+    -- @param #SET_UNIT self
+    -- @param #string Coalitions Can take the following values: "red", "blue", "neutral" and coalition.side.RED, coalition.side.BLUE,coalition.side.NEUTRAL
+    -- @param #boolean Clear If `true`, clear any previously defined filters.
+    -- @return #SET_UNIT self
+    
     return self
   end
 
@@ -3348,7 +3395,7 @@ do -- SET_UNIT
       if self.Filter.UnitPrefixes and MUnitInclude then
         local MUnitPrefix = false
         for UnitPrefixId, UnitPrefix in pairs(self.Filter.UnitPrefixes) do          
-          if self:_SearchPattern(MUnit:GetName(), UnitPrefix, false, true) then
+          if self:_SearchPattern(MUnit:GetName(), UnitPrefix, self.filterNoRegex, self.filterReplaceDash) then
             MUnitPrefix = true
           end
         end
@@ -3544,7 +3591,27 @@ do -- SET_STATIC
 
     -- Inherits from BASE
     local self = BASE:Inherit(self, SET_BASE:New(_DATABASE.STATICS)) -- Core.Set#SET_STATIC
-
+    
+    --- Filter the set once
+    -- @function [parent=#SET_STATIC] FilterOnce
+    -- @param #SET_STATIC self
+    -- @return #SET_STATIC self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_STATIC] FilterSetRegex
+    -- @param #SET_STATIC self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_STATIC self
+    
+    --- Builds a set of objects of same coalitions.
+    -- Possible current coalitions are red, blue and neutral.
+    -- @function [parent=#SET_STATIC] FilterCoalitions
+    -- @param #SET_STATIC self
+    -- @param #string Coalitions Can take the following values: "red", "blue", "neutral" and coalition.side.RED, coalition.side.BLUE,coalition.side.NEUTRAL
+    -- @param #boolean Clear If `true`, clear any previously defined filters.
+    -- @return #SET_STATIC self
+    
     return self
   end
 
@@ -4119,7 +4186,7 @@ do -- SET_STATIC
     if self.Filter.StaticPrefixes then
       local MStaticPrefix = false
       for StaticPrefixId, StaticPrefix in pairs(self.Filter.StaticPrefixes) do
-        if self:_SearchPattern(MStatic:GetName(), StaticPrefix, false, true) then
+        if self:_SearchPattern(MStatic:GetName(), StaticPrefix, self.filterNoRegex, self.filterReplaceDash) then
           MStaticPrefix = true
         end
       end
@@ -4303,7 +4370,27 @@ do -- SET_CLIENT
     local self = BASE:Inherit(self, SET_BASE:New(_DATABASE.CLIENTS)) -- #SET_CLIENT
 
     self:FilterActive(false)
-
+    
+    --- Filter the set once
+    -- @function [parent=#SET_CLIENT] FilterOnce
+    -- @param #SET_CLIENT self
+    -- @return #SET_CLIENT self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_CLIENT] FilterSetRegex
+    -- @param #SET_CLIENT self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_CLIENT self
+    
+    --- Builds a set of objects of same coalitions.
+    -- Possible current coalitions are red, blue and neutral.
+    -- @function [parent=#SET_CLIENT] FilterCoalitions
+    -- @param #SET_CLIENT self
+    -- @param #string Coalitions Can take the following values: "red", "blue", "neutral" and coalition.side.RED, coalition.side.BLUE,coalition.side.NEUTRAL
+    -- @param #boolean Clear If `true`, clear any previously defined filters.
+    -- @return #SET_CLIENT self
+    
     return self
   end
 
@@ -4902,7 +4989,7 @@ do -- SET_CLIENT
       if self.Filter.ClientPrefixes and MClientInclude then
         local MClientPrefix = false
         for ClientPrefixId, ClientPrefix in pairs(self.Filter.ClientPrefixes) do
-          if self:_SearchPattern(MClient.UnitName, ClientPrefix) then          
+          if self:_SearchPattern(MClient.UnitName, ClientPrefix, self.filterNoRegex, self.filterReplaceDash) then          
             MClientPrefix = true
           end
         end
@@ -4926,7 +5013,7 @@ do -- SET_CLIENT
       local playername = MClient:GetPlayerName() or "Unknown"
       --self:T(playername)
       for _,_Playername in pairs(self.Filter.Playernames) do
-        if playername and self:_SearchPattern(playername,_Playername) then
+        if playername and self:_SearchPattern(playername,_Playername,self.filterNoRegex, self.filterReplaceDash) then
           MClientPlayername = true
         end
       end
@@ -4939,7 +5026,7 @@ do -- SET_CLIENT
       local callsign = MClient:GetCallsign()
       --self:I(callsign)
       for _,_Callsign in pairs(self.Filter.Callsigns) do
-        if callsign and self:_SearchPattern(callsign,_Callsign, true) then
+        if callsign and self:_SearchPattern(callsign,_Callsign, self.filterNoRegex, self.filterReplaceDash) then
           MClientCallsigns = true
         end
       end
@@ -5360,7 +5447,7 @@ do -- SET_PLAYER
       if self.Filter.ClientPrefixes then
         local MClientPrefix = false
         for ClientPrefixId, ClientPrefix in pairs(self.Filter.ClientPrefixes) do
-          if self:_SearchPattern(MClient.UnitName,ClientPrefix) then
+          if self:_SearchPattern(MClient.UnitName,ClientPrefix,self.filterNoRegex, self.filterReplaceDash) then
             MClientPrefix = true
           end
         end
@@ -5830,7 +5917,19 @@ do -- SET_ZONE
   function SET_ZONE:New()
     -- Inherits from BASE
     local self = BASE:Inherit(self, SET_BASE:New(_DATABASE.ZONES))
-
+    
+    --- Filter the set once
+    -- @function [parent=#SET_ZONE] FilterOnce
+    -- @param #SET_ZONE self
+    -- @return #SET_ZONE self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_ZONE] FilterSetRegex
+    -- @param #SET_ZONE self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_ZONE self
+    
     return self
   end
 
@@ -6068,7 +6167,7 @@ do -- SET_ZONE
       if self.Filter.Prefixes then
         local MZonePrefix = false
         for ZonePrefixId, ZonePrefix in pairs(self.Filter.Prefixes) do
-          if self:_SearchPattern(MZoneName, ZonePrefix, false, true) then
+          if self:_SearchPattern(MZoneName, ZonePrefix, self.filterNoRegex, self.filterReplaceDash) then
             MZonePrefix = true
           end
         end
@@ -6577,7 +6676,7 @@ do -- SET_ZONE_GOAL
       if self.Filter.Prefixes then
         local MZonePrefix = false
         for ZonePrefixId, ZonePrefix in pairs(self.Filter.Prefixes) do
-          if self:_SearchPattern(MZoneName, ZonePrefix, false, true) then          
+          if self:_SearchPattern(MZoneName, ZonePrefix, self.filterNoRegex, self.filterReplaceDash) then          
             MZonePrefix = true
           end
         end
@@ -6713,7 +6812,19 @@ do -- SET_OPSZONE
   
     -- Inherits from BASE
     local self = BASE:Inherit(self, SET_BASE:New(_DATABASE.OPSZONES))
-
+    
+    --- Filter the set once
+    -- @function [parent=#SET_OPSZONE] FilterOnce
+    -- @param #SET_OPSZONE self
+    -- @return #SET_OPSZONE self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_OPSZONE] FilterSetRegex
+    -- @param #SET_OPSZONE self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_OPSZONE self
+    
     return self
   end
 
@@ -6938,7 +7049,7 @@ do -- SET_OPSZONE
         for ZonePrefixId, ZonePrefix in pairs(self.Filter.Prefixes) do
         
           -- Prefix
-          if self:_SearchPattern(MZoneName, ZonePrefix, false, true) then
+          if self:_SearchPattern(MZoneName, ZonePrefix, self.filterNoRegex, self.filterReplaceDash) then
             MZonePrefix = true
             break --Break the loop as we found the prefix.
           end
@@ -7732,7 +7843,7 @@ function SET_OPSGROUP:_EventOnBirth(Event)
       local MGroupPrefix = false
       
       for GroupPrefixId, GroupPrefix in pairs(self.Filter.GroupPrefixes) do
-        if self:_SearchPattern(MGroup:GetName(), GroupPrefix, false, true) then
+        if self:_SearchPattern(MGroup:GetName(), GroupPrefix, self.filterNoRegex, self.filterReplaceDash) then
           MGroupPrefix = true
         end
       end
@@ -8066,7 +8177,7 @@ do -- SET_SCENERY
       if self.Filter.Prefixes then
         local MSceneryPrefix = false
         for ZonePrefixId, ZonePrefix in pairs(self.Filter.Prefixes) do
-          if self:_SearchPattern(MSceneryName, ZonePrefix, false, true) then
+          if self:_SearchPattern(MSceneryName, ZonePrefix, self.filterNoRegex, self.filterReplaceDash) then
             MSceneryPrefix = true
           end
         end
@@ -8289,7 +8400,19 @@ do -- SET_DYNAMICCARGO
 
     --- Inherits from BASE
     local self = BASE:Inherit(self, SET_BASE:New(_DATABASE.DYNAMICCARGO)) -- Core.Set#SET_DYNAMICCARGO
-
+      
+    --- Filter the set once
+    -- @function [parent=#SET_DYNAMICCARGO] FilterOnce
+    -- @param #SET_DYNAMICCARGO self
+    -- @return #SET_DYNAMICCARGO self
+    
+    ---Set Regex Options for FilterPrefix function.
+    -- @function [parent=#SET_DYNAMICCARGO] FilterSetRegex
+    -- @param #SET_DYNAMICCARGO self
+    -- @param #boolean NoRegex If true, switch off Regex pattern matching for FilterPrefixes.
+    -- @param #boolean ReplaceDash If false, switch off dash "-" replacement in strings for FilterPrefixes.
+    -- @return #SET_DYNAMICCARGO self
+    
     return self
   end
   
@@ -8337,7 +8460,7 @@ do -- SET_DYNAMICCARGO
     if self.Filter.StaticPrefixes then
       local DCargoPrefix = false
       for StaticPrefixId, StaticPrefix in pairs(self.Filter.StaticPrefixes) do
-        if self:_SearchPattern(DCargo:GetName(), StaticPrefix, false, true) then
+        if self:_SearchPattern(DCargo:GetName(), StaticPrefix, self.filterNoRegex, self.filterReplaceDash) then
           DCargoPrefix = true
         end
       end
@@ -8505,7 +8628,7 @@ do -- SET_DYNAMICCARGO
   function SET_DYNAMICCARGO:FilterCurrentOwner(PlayerName)
     self:FilterFunction(
       function(cargo)
-        if cargo and cargo.Owner and self:_SearchPattern(cargo.Owner, PlayerName, true) then
+        if cargo and cargo.Owner and self:_SearchPattern(cargo.Owner, PlayerName, self.filterNoRegex, self.filterReplaceDash) then
           return true
         else
           return false

Moose Development/Moose/Core/Spawn.lua

@@ -1184,6 +1184,7 @@ end
 
 --- This method provides the functionality to randomize the spawning of the Groups at a given list of zones of different types.
 -- @param #SPAWN self
+-- @param #table SpawnZoneTable A table with @{Core.Zone} objects. If nil or empty, the method returns self without effect.
 -- @param #table SpawnZoneTable A table with @{Core.Zone} objects. If this table is given, then each spawn will be executed within the given list of @{Core.Zone}s objects.
 -- @param #boolean RandomizePositionInZone If nil or true, also the position inside the selected random zone will be randomized. Set to false to use the center of the zone.
 -- @return #SPAWN self
@@ -1201,6 +1202,9 @@ end
 function SPAWN:InitRandomizeZones( SpawnZoneTable, RandomizePositionInZone )
   --self:F( { self.SpawnTemplatePrefix, SpawnZoneTable } )
   
+  if not SpawnZoneTable then 
+    return self 
+  end
   local temptable = {}
   for _,_temp in pairs(SpawnZoneTable) do
     temptable[#temptable+1] = _temp
@@ -2149,6 +2153,7 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
       local parkingspots = {}
       local parkingindex = {}
       local spots
+      local useexplicitspots = false
 
       -- Spawn happens on ground, i.e. at an airbase, a FARP or a ship.
       if spawnonground and not SpawnTemplate.parked then
@@ -2178,15 +2183,41 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
         local scanscenery = false
         local verysafe = false
 
+        -- Use exact parking data when provided, otherwise let helicopters on ships/FARPs
+        -- use the smarter parking search before falling back to the procedural queue path.
         -- Number of free parking spots at the airbase.
-        if autoparking then
+        if Parkingdata~=nil then
+          -- Parking data explicitly set by user as input parameter.
+          nfree = #Parkingdata
+          spots = Parkingdata
+          useexplicitspots = true
+        elseif autoparking and AirbaseCategory == Airbase.Category.HELIPAD and ishelo then
+          if termtype == nil then
+            -- Helo is spawned. Try exclusive helo spots first.
+            spots = SpawnAirbase:FindFreeParkingSpotForAircraft( group, AIRBASE.TerminalType.HelicopterOnly, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+            nfree = #spots
+            if nfree < nunits then
+              -- Not enough helo ports. Let's try also other terminal types.
+              spots = SpawnAirbase:FindFreeParkingSpotForAircraft( group, AIRBASE.TerminalType.HelicopterUsable, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+              nfree = #spots
+            end
+          else
+            -- Terminal type explicitly given.
+            spots = SpawnAirbase:FindFreeParkingSpotForAircraft( group, termtype, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+            nfree = #spots
+          end
+
+          if nfree >= nunits then
+            useexplicitspots = true
+          else
+            -- These places work procedural and have some kind of build in queue ==> Less effort.
+            nfree = SpawnAirbase:GetFreeParkingSpotsNumber( termtype, true )
+            spots = SpawnAirbase:GetFreeParkingSpotsTable( termtype, true )
+          end
+        elseif autoparking then
           -- These places work procedural and have some kind of build in queue ==> Less effort.
           nfree = SpawnAirbase:GetFreeParkingSpotsNumber( termtype, true )
           spots = SpawnAirbase:GetFreeParkingSpotsTable( termtype, true )
-        elseif Parkingdata~=nil then
-          -- Parking data explicitly set by user as input parameter. (This was commented out for some unknown reason. But I need it this way.)
-          nfree=#Parkingdata
-          spots=Parkingdata
         else
           if ishelo then
             if termtype == nil then
@@ -2238,7 +2269,7 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
         local _notenough = false
 
         -- Need to differentiate some cases again.
-        if autoparking then
+        if autoparking and not useexplicitspots then
 
           -- On free spot required in these cases.
           if nfree >= 1 then
@@ -2271,6 +2302,10 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
           end
         end
 
+        if useexplicitspots and parkingspots[1] then
+          PointVec3 = parkingspots[1]
+        end
+
         -- Not enough spots ==> Prepare airstart.
         if _notenough then
 
@@ -2296,9 +2331,15 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
 
             Takeoff = GROUP.Takeoff.Air
             spawnonground = false
-          else
+          else       
+           if not Takeoff == GROUP.Takeoff.Runway then
             self:E( string.format( "WARNING: Group %s has no parking spots at %s ==> No emergency air start or uncontrolled spawning ==> No spawn!", self.SpawnTemplatePrefix, SpawnAirbase:GetName() ) )
             return nil
+            else
+            Takeoff = GROUP.Takeoff.Runway
+            spawnonground = false
+            self:E( string.format( "WARNING: Group %s set to runway spawning at %s, this only works in Single Player!", self.SpawnTemplatePrefix, SpawnAirbase:GetName() ) )
+            end
           end
         end
 
@@ -2339,7 +2380,7 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
           if spawnonground then
 
             -- Ships and FARPS seem to have a build in queue.
-            if autoparking then
+            if autoparking and not useexplicitspots then
 
               -- Spawn on ship. We take only the position of the ship.
               SpawnTemplate.units[UnitID].x = PointVec3.x -- TX
@@ -2357,7 +2398,7 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
 
           else
 
-            -- Spawn in air as requested initially. Original template orientation is perserved, altitude is already correctly set.
+            -- Spawn in air as requested initially. Original template orientation is preserved, altitude is already correctly set.
             SpawnTemplate.units[UnitID].x = TX
             SpawnTemplate.units[UnitID].y = TY
             SpawnTemplate.units[UnitID].alt = PointVec3.y
@@ -2390,7 +2431,7 @@ function SPAWN:SpawnAtAirbase( SpawnAirbase, Takeoff, TakeoffAltitude, TerminalT
       if Takeoff == GROUP.Takeoff.Air then
         for UnitID, UnitSpawned in pairs( GroupSpawned:GetUnits() ) do
           --SCHEDULER:New( nil, BASE.CreateEventTakeoff, { GroupSpawned, timer.getTime(), UnitSpawned:GetDCSObject() }, 5 )  --No need to create a new SCHEDULER instance every time!
-          self:ScheduleOnce(5, BASE.CreateEventTakeoff, {GroupSpawned, timer.getTime(), UnitSpawned:GetDCSObject()})
+          self:ScheduleOnce(5, BASE.CreateEventTakeoff, GroupSpawned, timer.getTime(), UnitSpawned:GetDCSObject())
         end
       end
 
@@ -2582,21 +2623,51 @@ function SPAWN:ParkAircraft( SpawnAirbase, TerminalType, Parkingdata, SpawnIndex
       local scanscenery = false
       local verysafe = false
 
-      -- Number of free parking spots at the airbase.
-      if spawnonship or spawnonfarp or spawnonrunway then
-        -- These places work procedural and have some kind of build in queue ==> Less effort.
-        --self:T2( string.format( "Group %s is spawned on farp/ship/runway %s.", self.SpawnTemplatePrefix, SpawnAirbase:GetName() ) )
-        nfree = SpawnAirbase:GetFreeParkingSpotsNumber( termtype, true )
-        spots = SpawnAirbase:GetFreeParkingSpotsTable( termtype, true )
-        --[[
-      elseif Parkingdata~=nil then
-        -- Parking data explicitly set by user as input parameter.
-        nfree=#Parkingdata
-        spots=Parkingdata
-      ]]
-      else
-        if ishelo then
+        -- Use exact parking data when provided, otherwise let helicopters on FARPs
+        -- use the smarter parking search before falling back to the procedural queue path.
+        local useexplicitspots = false
+
+        -- Number of free parking spots at the airbase.
+        if Parkingdata~=nil then
+          -- Parking data explicitly set by user as input parameter.
+          nfree = #Parkingdata
+          spots = Parkingdata
+          useexplicitspots = true
+        elseif spawnonfarp and ishelo then
           if termtype == nil then
+            -- Helo is spawned. Try exclusive helo spots first.
+            --self:T2( string.format( "Helo group %s is at %s using terminal type %d.", self.SpawnTemplatePrefix, SpawnAirbase:GetName(), AIRBASE.TerminalType.HelicopterOnly ) )
+            spots = SpawnAirbase:FindFreeParkingSpotForAircraft( TemplateGroup, AIRBASE.TerminalType.HelicopterOnly, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+            nfree = #spots
+            if nfree < nunits then
+              -- Not enough helo ports. Let's try also other terminal types.
+              --self:T2( string.format( "Helo group %s is at %s using terminal type %d.", self.SpawnTemplatePrefix, SpawnAirbase:GetName(), AIRBASE.TerminalType.HelicopterUsable ) )
+              spots = SpawnAirbase:FindFreeParkingSpotForAircraft( TemplateGroup, AIRBASE.TerminalType.HelicopterUsable, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+              nfree = #spots
+            end
+          else
+            -- Terminal type explicitly given.
+            --self:T2( string.format( "Helo group %s is at %s using terminal type %d.", self.SpawnTemplatePrefix, SpawnAirbase:GetName(), termtype ) )
+            spots = SpawnAirbase:FindFreeParkingSpotForAircraft( TemplateGroup, termtype, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, nil )
+            nfree = #spots
+          end
+
+          if nfree >= nunits then
+            useexplicitspots = true
+          else
+            -- These places work procedural and have some kind of build in queue ==> Less effort.
+            --self:T2( string.format( "Group %s is spawned on farp %s using procedural spots.", self.SpawnTemplatePrefix, SpawnAirbase:GetName() ) )
+            nfree = SpawnAirbase:GetFreeParkingSpotsNumber( termtype, true )
+            spots = SpawnAirbase:GetFreeParkingSpotsTable( termtype, true )
+          end
+        elseif spawnonship or spawnonfarp or spawnonrunway then
+          -- These places work procedural and have some kind of build in queue ==> Less effort.
+          --self:T2( string.format( "Group %s is spawned on farp/ship/runway %s.", self.SpawnTemplatePrefix, SpawnAirbase:GetName() ) )
+          nfree = SpawnAirbase:GetFreeParkingSpotsNumber( termtype, true )
+          spots = SpawnAirbase:GetFreeParkingSpotsTable( termtype, true )
+        else
+          if ishelo then
+            if termtype == nil then
             -- Helo is spawned. Try exclusive helo spots first.
             --self:T2( string.format( "Helo group %s is at %s using terminal type %d.", self.SpawnTemplatePrefix, SpawnAirbase:GetName(), AIRBASE.TerminalType.HelicopterOnly ) )
             spots = SpawnAirbase:FindFreeParkingSpotForAircraft( TemplateGroup, AIRBASE.TerminalType.HelicopterOnly, scanradius, scanunits, scanstatics, scanscenery, verysafe, nunits, Parkingdata )
@@ -2659,7 +2730,7 @@ function SPAWN:ParkAircraft( SpawnAirbase, TerminalType, Parkingdata, SpawnIndex
       local _notenough = false
 
       -- Need to differentiate some cases again.
-      if spawnonship or spawnonfarp or spawnonrunway then
+      if (spawnonship or spawnonfarp or spawnonrunway) and not useexplicitspots then
 
         -- On free spot required in these cases. 
         if nfree >= 1 then

Moose Development/Moose/DCS.lua

@@ -87,7 +87,8 @@ do -- world
   -- @field S_EVENT_SIMULATION_UNFREEZE = 58 
   -- @field S_EVENT_HUMAN_AIRCRAFT_REPAIR_START = 59 
   -- @field S_EVENT_HUMAN_AIRCRAFT_REPAIR_FINISH = 60   
-  -- @field S_EVENT_MAX = 61
+  -- @field S_EVENT_GROUP_CHANGE_OPTION = 61
+  -- @field S_EVENT_MAX = 62
   
   --- The birthplace enumerator is used to define where an aircraft or helicopter has spawned in association with birth events.
   -- @type world.BirthPlace

Moose Development/Moose/Functional/Detection.lua

@@ -1848,7 +1848,7 @@ do -- DETECTION_BASE
     return self
   end
 
-  --- Validate if the detected item is locked.
+  --- Validate if the detected item is locked (not in the radar sense, though!).
   -- @param #DETECTION_BASE self
   -- @param #DETECTION_BASE.DetectedItem DetectedItem The DetectedItem.
   -- @return #boolean
@@ -1858,7 +1858,7 @@ do -- DETECTION_BASE
 
   end
 
-  --- Lock a detected item.
+  --- Lock a detected item (not in the radar sense, though!).
   -- @param #DETECTION_BASE self
   -- @param #DETECTION_BASE.DetectedItem DetectedItem The DetectedItem.
   -- @return #DETECTION_BASE
@@ -1869,7 +1869,7 @@ do -- DETECTION_BASE
     return self
   end
 
-  --- Unlock a detected item.
+  --- Unlock a detected item (not in the radar sense, though!).
   -- @param #DETECTION_BASE self
   -- @param #DETECTION_BASE.DetectedItem DetectedItem The DetectedItem.
   -- @return #DETECTION_BASE

Moose Development/Moose/Functional/Shorad.lua

@@ -795,15 +795,20 @@ do
          local tgtgrp1 = self.Samset:FindNearestGroupFromPointVec2(tgtcoord)
           local tgtcoord1 = tgtgrp1:GetCoordinate()
           local tgtgrp2 = self.Groupset:FindNearestGroupFromPointVec2(tgtcoord)
-          local tgtcoord2 = tgtgrp2:GetCoordinate()
-          local dist1 = tgtcoord:Get2DDistance(tgtcoord1)
-          local dist2 = tgtcoord:Get2DDistance(tgtcoord2)
-          
-          if dist1 < dist2 then
-            targetunit = tgtgrp1
-            targetcat = Object.Category.UNIT
+          if tgtgrp2 then
+            local tgtcoord2 = tgtgrp2:GetCoordinate()
+            local dist1 = tgtcoord:Get2DDistance(tgtcoord1)
+            local dist2 = tgtcoord:Get2DDistance(tgtcoord2)
+
+            if dist1 < dist2 then
+              targetunit = tgtgrp1
+              targetcat = Object.Category.UNIT
+            else
+              targetunit = tgtgrp2
+              targetcat = Object.Category.UNIT
+            end
           else
-            targetunit = tgtgrp2
+            targetunit = tgtgrp1
             targetcat = Object.Category.UNIT
           end
         end   

Moose Development/Moose/Functional/Suppression.lua

@@ -1485,7 +1485,7 @@ function SUPPRESSION:onafterStop(Controllable, From, Event, To)
       
   local text=string.format("Stopping SUPPRESSION for group %s", self.Controllable:GetName())
   MESSAGE:New(text, 10):ToAllIf(self.Debug)
-  sefl:T(self.lid..text)
+  self:T(self.lid..text)
       
   -- Clear all pending schedules
   self.CallScheduler:Clear()

Moose Development/Moose/Functional/Warehouse.lua

@@ -4097,7 +4097,7 @@ function WAREHOUSE:_RegisterAsset(group, ngroups, forceattribute, forcecargobay,
   -- Get name of template group.
   local templategroupname=group:GetName()
   local unit = group:GetUnit(1)
-  local Descriptors= (unit and unit:IsAlive()) and unit:GetDesc() or {}
+  local Descriptors= (unit and unit:IsAlive()~=nil) and unit:GetDesc() or {}
   local Category=group:GetCategory()
   local TypeName=group:GetTypeName() or "none"
   local SpeedMax=group:GetSpeedMax()
@@ -4115,7 +4115,7 @@ function WAREHOUSE:_RegisterAsset(group, ngroups, forceattribute, forcecargobay,
   for _i,_unit in pairs(group:GetUnits()) do
     local unit=_unit --Wrapper.Unit#UNIT
     local Desc=unit:GetDesc()
-
+    
     -- Weight. We sum up all units in the group.
     local unitweight=forceweight or Desc.massEmpty
     if unitweight then

Moose Development/Moose/Modules.lua

@@ -115,6 +115,7 @@ __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Ops/Squadron.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Ops/Target.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Ops/EasyGCICAP.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Ops/EasyA2G.lua' )
+__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Ops/TARS.lua' )
 
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Shapes/ShapeBase.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Shapes/Circle.lua' )

Moose Development/Moose/Ops/Airboss.lua

@@ -2717,17 +2717,27 @@ function AIRBOSS:DeleteRecoveryWindow( Window, Delay )
     self:ScheduleOnce( Delay, self.DeleteRecoveryWindow, self, Window )
   else
 
-    for i, _recovery in pairs( self.recoverytimes ) do
-      local recovery = _recovery -- #AIRBOSS.Recovery
+    if not Window then
+      return
+    end
 
-      if Window and Window.ID == recovery.ID then
-        if Window.OPEN then
-          -- Window is currently open.
-          self:RecoveryStop()
-        else
-          table.remove( self.recoverytimes, i )
-        end
+    -- If this window is currently open, stop recovery first. Mark it OVER so the
+    -- recovery time check cannot re-open it before/while we remove it.
+    if Window.OPEN then
+      Window.OPEN = false
+      Window.OVER = true
+      if self:IsRecovering() then
+        self:RecoveryStop()
+      end
+    end
 
+    -- Remove the window from the queue by its unique ID. Iterate over a numerically
+    -- indexed copy of the keys and remove via ipairs-safe reverse loop so that the
+    -- removal does not corrupt traversal (the window may appear once).
+    for i = #self.recoverytimes, 1, -1 do
+      local recovery = self.recoverytimes[i] -- #AIRBOSS.Recovery
+      if recovery and recovery.ID == Window.ID then
+        table.remove( self.recoverytimes, i )
       end
     end
   end
@@ -4078,15 +4088,23 @@ function AIRBOSS:_CheckRecoveryTimes()
         if self:IsRecovering() then
           -- Carrier is already recovering.
           state = "in progress"
-        else
-          -- Start recovery.
+        elseif not recovery.OVER then
+          -- Start recovery. Only if the window has not already been closed/cancelled.
+          -- The OVER guard prevents a window that was stopped manually (e.g. via the
+          -- Skipper "Stop Recovery" menu) from being immediately re-opened on the next
+          -- status tick while its [START,STOP) range is still active.
           self:RecoveryStart( recovery.CASE, recovery.OFFSET )
           state = "starting now"
           recovery.OPEN = true
+        else
+          -- Window was already closed/cancelled within its active time range.
+          state = "cancelled"
         end
 
-        -- Set current recovery window.
-        currwindow = recovery
+        -- Set current recovery window (unless this window has been cancelled).
+        if not recovery.OVER then
+          currwindow = recovery
+        end
 
       else -- Stop time HAS passed.
 
@@ -4183,13 +4201,16 @@ function AIRBOSS:_CheckRecoveryTimes()
         -- Time into the wind 1 day or if longer recovery time + the 5 min early.
         local t = math.max( nextwindow.STOP - nextwindow.START + self.dTturn, 60 * 60 * 24 )
 
-        -- Recovery wind on deck in knots.
+         -- Recovery wind on deck in knots.
+        -- NOTE: Do NOT clamp the desired wind-over-deck (WOD) to the carrier's max hull
+        -- speed here. WOD = carrier speed + headwind, so a WOD target above the hull's
+        -- top speed is achievable whenever there is wind. CarrierTurnIntoWind ->
+        -- GetHeadingIntoWind already converts the WOD target into the required hull
+        -- speed and caps THAT at the carrier's max speed (Vmax) internally. Clamping the
+        -- WOD target itself capped achievable WOD at ~30 kts (the supercarrier's max
+        -- hull speed) even in strong wind, which made high-WOD recovery windows fall
+        -- short of their requested value.
         local v = UTILS.KnotsToMps( nextwindow.SPEED )
-
-        -- Check that we do not go above max possible speed.
-        local vmax = self.carrier:GetSpeedMax() / 3.6 -- convert to m/s
-        v = math.min( v, vmax )
-
         -- Route carrier into the wind. Sets self.turnintowind=true
         self:CarrierTurnIntoWind( t, v, uturn )
 
@@ -4361,11 +4382,20 @@ function AIRBOSS:onafterRecoveryStop( From, Event, To )
     self:CarrierResumeRoute( coord )
   end
 
-  -- Delete current recovery window if open.
-  if self.recoverywindow and self.recoverywindow.OPEN == true then
+  -- Mark the current recovery window closed and cancelled, then remove it from the
+  -- queue. We do NOT gate this on Window.OPEN: that flag is only set by
+  -- _CheckRecoveryTimes (not by RecoveryStart), and the recovery time check nils and
+  -- rebuilds self.recoverywindow every status tick, so OPEN is not a reliable signal
+  -- here. Setting OVER=true is what actually prevents the window from being re-opened
+  -- on the next tick while its [START,STOP) range is still active.
+  --
+  -- The removal is deferred by one tick (Delay>0) so it does not mutate the
+  -- recoverytimes table while _CheckRecoveryTimes may be iterating over it (the natural
+  -- close path calls RecoveryStop() from inside that loop).
+  if self.recoverywindow then
     self.recoverywindow.OPEN = false
     self.recoverywindow.OVER = true
-    self:DeleteRecoveryWindow( self.recoverywindow )
+    self:DeleteRecoveryWindow( self.recoverywindow, 1 )
   end
 
   -- Check recovery windows. This sets self.recoverywindow to the next window.
@@ -12903,6 +12933,14 @@ function AIRBOSS:_LSOgrade( playerData )
     -- Circuit edit only take points awary from a 1 wire if there are more than 4 other deviations
   if playerData.wire == 1 and points >= 3 and N > 4 then
     points = points -1
+    -- We also need to change the grade based on the new points.
+    if points == 4 then
+      grade = "OK"
+    elseif points == 3 then
+      grade = "(OK)"
+    elseif points == 2 then 
+      grade = "--"
+    end
   end
 
   env.info("Returning: " .. grade .. "  " .. points .. "  " .. G)

Moose Development/Moose/Ops/Auftrag.lua

@@ -6610,7 +6610,7 @@ function AUFTRAG:GetDCSMissionTask(MissionGroup)
       local SeadUnitSet = SET_UNIT:New()
       for _,_unit in pairs (ScanUnitSet.Set) do
         local unit = _unit -- Wrapper.Unit#UNTI
-        if unit and unit:IsAlive() and unit:HasSEAD() then
+        if unit and unit:IsAlive() and unit.HasSEAD and unit:HasSEAD() then
           self:T("Adding UNIT for SEAD: "..unit:GetName())
           local task = CONTROLLABLE.TaskAttackUnit(nil,unit,GroupAttack,AI.Task.WeaponExpend.ALL,1,Direction,self.engageAltitude,2956984318)
           table.insert(DCStasks, task)

Moose Development/Moose/Ops/CSAR.lua

@@ -504,6 +504,9 @@ CSAR.AircraftType["OH58D"] = 2
 CSAR.AircraftType["CH-47Fbl1"] = 31
 CSAR.AircraftType["AH-6J"] = 2
 CSAR.AircraftType["MH-6J"] = 2
+CSAR.AircraftType["Ka-50_3"] = 0
+CSAR.AircraftType["Ka-50"] = 0
+CSAR.AircraftType["AV8BNA"] = 0
 
 --- CSAR class version.
 -- @field #string version
@@ -2538,8 +2541,11 @@ function CSAR:_AddMedevacMenuItem()
     if _unit then
       --self:T("Unitname ".._unit:GetName().." IsAlive "..tostring(_unit:IsAlive()).." IsPlayer "..tostring(_unit:IsPlayer()))
       if _unit:IsAlive() and _unit:IsPlayer() then
-        local unitName = _unit:GetName()
-        _UnitList[unitName] = unitName
+        local _maxUnits = self.AircraftType[_unit:GetTypeName()]
+        if _maxUnits == nil or _maxUnits > 0 then
+          local unitName = _unit:GetName()
+          _UnitList[unitName] = unitName
+        end
       end -- end isAlive
     end -- end if _unit
   end -- end for

Moose Development/Moose/Ops/EasyGCICAP.lua

@@ -21,7 +21,7 @@
 -- 
 -------------------------------------------------------------------------
 -- Date: September 2023
--- Last Update: Mar 2026
+-- Last Update: June 2026
 -------------------------------------------------------------------------
 --
 --- **Ops** - Easy GCI & CAP Manager
@@ -135,6 +135,7 @@
 --          local mywing = EASYGCICAP:New("Blue CAP Operations",AIRBASE.Caucasus.Kutaisi,"blue","Blue EWR")
 --          
 --          -- Add a CAP patrol point belonging to our airbase, we'll be at 30k ft doing 400 kn, initial direction 90 degrees (East), leg 20NM
+--          -- NOTE - Skip this function and do not create CAP Points if you want GCI behaviour only.
 --          mywing:AddPatrolPointCAP(AIRBASE.Caucasus.Kutaisi,ZONE:FindByName("Blue Zone 1"):GetCoordinate(),30000,400,90,20)
 --          
 --          -- Add a Squadron with template "Blue Sq1 M2000c", 20 airframes, skill good, Modex starting with 102 and skin "Vendee Jeanne"
@@ -190,9 +191,10 @@
 -- * @{#EASYGCICAP.SetDefaultResurrection}: Set how many seconds the AirWing stays inoperable after the AirWing STATIC HQ ist destroyed, default 900 secs. 
 -- * @{#EASYGCICAP.SetDefaultCAPSpeed}: Set how many knots the CAP flights should do (will be altitude corrected), default 300 kn.
 -- * @{#EASYGCICAP.SetDefaultCAPAlt}: Set at which altitude (ASL) the CAP planes will fly, default 25,000 ft.
+-- * @{#EASYGCICAP.SetDefaultINTERCEPTAlt}: Set at which altitude (ASL) the Intercept planes will fly, default 25,000 ft.
 -- * @{#EASYGCICAP.SetDefaultCAPDirection}: Set the initial direction from the CAP point the planes will fly in degrees, default is 90°.
 -- * @{#EASYGCICAP.SetDefaultCAPLeg}: Set the length of the CAP leg, default is 15 NM.
--- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CVAP/GCI), defaults to 2.
+-- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CAP/GCI), defaults to 2.
 -- * @{#EASYGCICAP.SetDefaultMissionRange}: Set how many NM the planes can go from the home base, defaults to 100.
 -- * @{#EASYGCICAP.SetDefaultNumberAlert5Standby}: Set how many planes will be spawned on cold standby (Alert5), default 2.
 -- * @{#EASYGCICAP.SetDefaultEngageRange}: Set max engage range for CAP flights if they detect intruders, defaults to 50.
@@ -286,7 +288,7 @@ EASYGCICAP = {
 
 --- EASYGCICAP class version.
 -- @field #string version
-EASYGCICAP.version="0.1.35"
+EASYGCICAP.version="0.1.38"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- 
@@ -587,6 +589,17 @@ function EASYGCICAP:SetDefaultCAPAlt(Altitude)
   return self
 end
 
+--- Set default INTERCEPT Altitude in feet
+-- @param #EASYGCICAP self
+-- @param #number Altitude (Optional) Altitude defaults to 25000
+-- @return #EASYGCICAP self
+function EASYGCICAP:SetDefaultINTERCEPTAlt(Altitude)
+  self:T(self.lid.."SetDefaultINTERCEPTAlt")
+  self.interceptalt = Altitude or 25000
+  return self
+end
+--
+
 --- Set default CAP lieg initial direction in degrees
 -- @param #EASYGCICAP self
 -- @param #number Direction (Optional) Direction defaults to 90 (East)
@@ -754,6 +767,15 @@ end
 function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   self:T(self.lid.."_AddAirwing "..Airbasename)
   
+    -- Gather Some Stats
+  local function counttable(tbl)
+    local count = 0
+    for _,_data in pairs(tbl) do
+      count = count + 1
+    end
+    return count
+  end
+  
   local CapFormation = self.CapFormation
   local DespawnAfterLanding = self.DespawnAfterLanding
   local DespawnAfterHolding = self.DespawnAfterHolding
@@ -772,7 +794,11 @@ function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   CAP_Wing:SetMarker(false)
   CAP_Wing:SetAirbase(AIRBASE:FindByName(Airbasename))
   CAP_Wing:SetRespawnAfterDestroyed()
-  CAP_Wing:SetNumberCAP(self.capgrouping)
+  
+  --- #DONE avoid wings with no CAP points starting CAP anyhow; AirWing uses this to start CAP and creates points when there are none.
+  if counttable(self.ManagedCP) >0 then
+    CAP_Wing:SetNumberCAP(self.capgrouping)
+  end
   CAP_Wing:SetCapCloseRaceTrack(true)
     
   if self.showpatrolpointmarks then
@@ -854,16 +880,18 @@ function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   end
   
   if self.noalert5 > 0 then
-    local alert
-    if self.ClassName == "EASYGCICAP" then  
-      alert = AUFTRAG:NewALERT5(AUFTRAG.Type.INTERCEPT) 
-    elseif self.ClassName == "EASYA2G" then
-      alert = AUFTRAG:NewALERT5(AUFTRAG.Type.BAI) 
+    for i=1,self.noalert5 do
+      local alert
+      if self.ClassName == "EASYGCICAP" then  
+        alert = AUFTRAG:NewALERT5(AUFTRAG.Type.INTERCEPT) 
+      elseif self.ClassName == "EASYA2G" then
+        alert = AUFTRAG:NewALERT5(AUFTRAG.Type.BAI) 
+      end
+      alert:SetRequiredAssets(self.capgrouping)
+      alert:SetRepeat(99) 
+      CAP_Wing:AddMission(alert)
+      table.insert(self.ListOfAuftrag,alert)
     end
-    alert:SetRequiredAssets(self.noalert5)
-    alert:SetRepeat(99) 
-    CAP_Wing:AddMission(alert)
-    table.insert(self.ListOfAuftrag,alert)
   end
     
   self.wings[Airbasename] = { CAP_Wing, AIRBASE:FindByName(Airbasename):GetZone(), Airbasename }
@@ -1037,7 +1065,7 @@ function EASYGCICAP:_SetCAPPatrolPoints()
       MESSAGE:New(self.lid.."You are trying to create a CAP point for which there is no wing! "..tostring(data.AirbaseName),30,"CHECK"):ToAllIf(self.debug):ToLog()
       return
     end
-    local Wing = self.wings[data.AirbaseName][1] -- Ops.Airwing#AIRWING
+    local Wing = self.wings[data.AirbaseName][1] -- Ops.AirWing#AIRWING
     local Coordinate = data.Coordinate
     local Altitude = data.Altitude
     local Speed = data.Speed 
@@ -1503,6 +1531,7 @@ function EASYGCICAP:_AssignIntercept(Cluster)
   local overhead = self.overhead
   local capspeed = self.capspeed + 100
   local capalt = self.capalt
+  local interalt = self.interceptalt or self.capalt
   local maxsize = self.maxinterceptsize
   local repeatsonfailure = self.repeatsonfailure
   
@@ -1590,6 +1619,7 @@ function EASYGCICAP:_AssignIntercept(Cluster)
           :SetRepeatOnFailure(repeats)
           :SetMissionSpeed(UTILS.KnotsToAltKIAS(capspeed,capalt))
           :SetMissionAltitude(capalt)
+          :SetEngageAltitude(interalt)
           
           if nogozoneset:Count() > 0 then
             InterceptAuftrag:AddConditionSuccess(
@@ -1835,9 +1865,10 @@ function EASYGCICAP:onafterRestart(From,Event,To)
   -- self.wings[Airbasename] = { CAP_Wing, AIRBASE:FindByName(Airbasename):GetZone(), Airbasename }
     for _,_wing in pairs(self.wings or {}) do
       for _,_aw in pairs(_wing) do
-        _wing[1]:Start()
+        _wing[1]:Restart()
       end
     end
   end
+  self:__Status(5)
   return self
 end

Moose Development/Moose/Ops/Intelligence.lua

@@ -1270,6 +1270,15 @@ function INTEL:_UpdateContact(Contact)
         else
           Contact.maneuvering = false
         end
+        local typename = Contact.group:GetTypeName()
+        local base_rcs = INTEL.RCS_Table[typename]
+    
+        if not base_rcs then
+            -- Fallback: category default
+            local cat = Contact.group:GetCategory()
+            base_rcs = (cat and INTEL.RCS_CategoryDefault[cat]) or INTEL.RCS_Reference
+        end
+        Contact.rcs = base_rcs
       end
     end
 

Moose Development/Moose/Ops/Legion.lua

@@ -2581,7 +2581,7 @@ end
 -- @return #boolean Returns `true` if given cohort can meet all requirements.
 function LEGION._CohortCan(Cohort, MissionType, Categories, Attributes, Properties, WeaponTypes, TargetVec2, RangeMax, RefuelSystem, CargoWeight, MaxWeight, RangeMin)
 
-  RangeMin = RangeMin or 0
+  RangeMin = RangeMin or -1
 
   --- Function to check category.
   local function CheckCategory(_cohort)

Moose Development/Moose/Sound/SRS.lua

@@ -61,24 +61,21 @@
 --
 -- # The MSRS Concept
 --
--- This class allows to broadcast sound files or text via Simple Radio Standalone (SRS).
+-- This class allows to broadcast sound files or text to speech via Simple Radio Standalone (SRS).
 --
 -- ## Prerequisites
 --
--- * This script needs SRS version >= 1.9.6
 -- * You need to de-sanitize os, io and lfs in the missionscripting.lua
--- * Optional: DCS-gRPC as backend to communicate with SRS (via infra)
--- * Optional: HOUNDTTS as backend to communicate with SRS (via infra)
+-- * Optional but recommended: HOUND TTS as backend to communicate with SRS (via plugin)
+-- * Optional: DCS-gRPC as backend to communicate with SRS (via plugin)
+-- 
+-- ## Known Issues
 --
--- ## Knwon Issues
---
--- ### Pop-up Window
+-- ### Pop-up Window (with backend windows)
 --
 -- The text-to-speech conversion of SRS is done via an external exe file. When this file is called, a windows `cmd` window is briefly opended. That puts DCS out of focus, which is annoying,
--- expecially in VR but unavoidable (if you have a solution, please feel free to share!).
+-- expecially in VR, but unavoidable unless you use HOUD or gRPC as backends.
 --
--- NOTE that this is not an issue if the mission is running on a server.
--- Also NOTE that using DCS-gRPC and Hound-TTS as backend create no pop-up window.
 --
 -- # Play Sound Files
 --
@@ -137,16 +134,17 @@
 --
 -- See @{#MSRS.LoadConfigFile} for details on how to set this up.
 --
--- ## TTS Providers
---
--- The default provider for generating speech from text is the native Windows TTS service. Note that you need to install the voices you want to use.
+-- ## TTS (text-to-speech) Providers
+-- 
+-- The **currently recommended** backend is HOUND TTS (no pop-ups), which has a wide variety of TTS providers.
+-- The *default* provider for generating speech from text is the native Windows TTS service. Note that you need to install the voices you want to use.
 -- 
 -- **Pro-Tip** - use the command line with power shell to call `DCS-SR-ExternalAudio.exe` - it will tell you what is missing
 -- and also the Google Console error, in case you have missed a step in setting up your Google TTS.
 -- For example, `.\DCS-SR-ExternalAudio.exe -t "Text Message" -f 255 -m AM -c 2 -s 2 -z -G "Path_To_You_Google.Json"`
 -- plays a message on 255 MHz AM for the blue coalition in-game.
 --
--- ### Google
+-- ### Google (best speech synthesis)
 -- 
 -- In order to use Google Cloud for TTS you need to use @{#MSRS.SetProvider} and @{#MSRS.SetProviderOptionsGoogle} functions:
 -- 
@@ -162,7 +160,7 @@
 -- For more information on setting up a cloud account, visit: https://cloud.google.com/text-to-speech
 -- Google's supported SSML reference: https://cloud.google.com/text-to-speech/docs/ssml
 --
--- ### Amazon Web Service [Only DCS-gRPC backend]
+-- ### Amazon Web Service [Only HOUDN and DCS-gRPC backend]
 -- 
 -- In order to use Amazon Web Service (AWS) for TTS you need to use @{#MSRS.SetProvider} and @{#MSRS.SetProviderOptionsAmazon} functions:
 -- 
@@ -173,7 +171,7 @@
 -- 
 -- You can set the voice to use with AWS via @{#MSRS.SetVoiceAmazon}.
 -- 
--- ### Microsoft Azure [Only DCS-gRPC backend]
+-- ### Microsoft Azure [Only HOUND and DCS-gRPC backend]
 -- 
 -- In order to use Microsoft Azure for TTS you need to use @{#MSRS.SetProvider} and @{#MSRS.SetProviderOptionsAzure} functions:
 -- 
@@ -184,6 +182,12 @@
 --
 -- You can set the voice to use with Azure via @{#MSRS.SetVoiceAzure}.
 --
+-- ### Piper, OpenAI and further provider options [Only HOUND backend]
+-- 
+-- You can use further providers with HOUND TTS as a backend, see [Hound-TTS](https://github.com/uriba107/HoundTTS/releases) for setup.
+-- 
+--     msrs:SetProvider(MSRS.Provider.PIPER) -- e.g. for piper
+--
 -- ## Backend
 --
 -- The default interface to SRS is via calling the 'DCS-SR-ExternalAudio.exe'. As noted above, this has the unavoidable drawback that a pop-up briefly appears
@@ -191,13 +195,13 @@
 --
 -- ## Hound TTS as an alternative to 'DCS-SR-ExternalAudio.exe' for TTS
 -- 
--- An alternative interface to SRS is [Hound-TTS](https://github.com/uriba107/HoundTTS/releases). This does not call an exe file and therefore avoids the annoying pop-up window.
+-- the recommended alternative interface to SRS is [Hound-TTS](https://github.com/uriba107/HoundTTS/releases). This does not call an exe file and therefore avoids the annoying pop-up window.
 -- In addition to Windows and Google cloud, it also offers Piper local voice creation and others as providers for TTS.
 --
 -- Use @{#MSRS.SetDefaultBackendHound} to enable [Hound-TTS](https://github.com/uriba107/HoundTTS/releases) as an alternate backend.
 -- This can be useful if the popup should be avoided or to use Piper or others for TTS. Please note, only text-to-speech is supported and it it cannot be used to transmit audio files.
 --
--- Hound TTS must be installed and configured per the [Hound TTS](https://github.com/uriba107/HoundTTS#installation) prior to use. 
+-- Hound TTS must be installed and configured per the [Hound TTS](https://github.com/uriba107/HoundTTS#installation) GitHub prior to use. 
 -- If a cloud TTS provider is being used, the API key(s) must be set as per the documentation.
 -- Hound TTS can be used both with DCS dedicated server and regular DCS installations.
 --
@@ -280,7 +284,7 @@ MSRS = {
 
 --- MSRS class version.
 -- @field #string version
-MSRS.version="0.3.5"
+MSRS.version="0.3.7"
 
 --- Voices
 -- @type MSRS.Voices
@@ -731,14 +735,16 @@ MSRS.Backend = {
 -- @field #string AZURE Microsoft Azure (`azure`). Only possible with DCS-gRPC backend.
 -- @field #string AMAZON Amazon Web Service (`aws`). Only possible with DCS-gRPC backend.
 -- @field #string PIPER Piper local voice service. Only possible with Hound-TTS backend.
--- @field #string KITTEN Kitten voice server. Only possible with Hound-TTS backend.
+-- @field #string KITTEN Kitten voice server. Only possible with Hound-TTS backend. Superseded by OpenAI
+-- @field #string OPENAI OpenAI voice server. Only possible with Hound-TTS backend.
 MSRS.Provider = {
   WINDOWS = "win",
   GOOGLE  = "gcloud",
   AZURE   = "azure",
   AMAZON  = "aws",
   PIPER   = "piper",
-  KITTEN  = "kitten",
+  KITTEN  = "openai",
+  OPENAI  = "openai",
 }
 
 --- Function for UUID.
@@ -1471,6 +1477,15 @@ function MSRS:SetTTSProviderKitten()
   return self
 end
 
+--- Use OpenAI to provide text-to-speech. Only supported if used in combination with Hound-TTS as backend.
+-- @param #MSRS self
+-- @return #MSRS self
+function MSRS:SetTTSProviderOpenAI()
+  self:F()
+  self:SetProvider(MSRS.Provider.OPENAI)
+  return self
+end
+
 --- Print SRS help to DCS log file.
 -- @param #MSRS self
 -- @return #MSRS self
@@ -1605,7 +1620,7 @@ function MSRS:PlayText(Text, Delay, Coordinate, Speed, Speaker)
   else
 
   local speaker = Speaker or self.Speaker
-
+  
   if self.backend==MSRS.Backend.GRPC then
     self:T(self.lid.."Transmitting")
     self:_DCSgRPCtts(Text, nil, nil , nil, nil, nil, nil, Coordinate)
@@ -2088,19 +2103,16 @@ function MSRS:_HoundTextToSpeech(Message,Frequencies,Modulations,Volume,Label,Co
     return
   end
   
-  Frequencies = UTILS.EnsureTable(Frequencies)
-  Modulations = UTILS.EnsureTable(Modulations)
+  Frequencies = UTILS.EnsureTable(Frequencies or self.frequencies)
+  Modulations = UTILS.EnsureTable(Modulations or self.modulations)
     
   local ffs = {}
-  for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.1f",_f))
+  for _,_f in pairs(Frequencies) do
+    table.insert(ffs,string.format("%.3f",_f))
   end
   
   local freqs = table.concat(ffs, ",")
-  
-
-  
-  local modus = table.concat(Modulations or self.modulations, ",")
+  local modus = table.concat(Modulations, ",")
 
   local coal=Coalition or self.coalition
   local gender=Gender or self.gender
@@ -2144,7 +2156,7 @@ function MSRS:_HoundTextToSpeech(Message,Frequencies,Modulations,Volume,Label,Co
     gender = gender,
     speaker = Speaker or self.Speaker,
   }
-  
+
   local speechtime = HoundTTS.Transmit(Message, TransmissionP, ProviderP)
   
   return speechtime
@@ -2202,7 +2214,7 @@ function MSRS:_HoundTestTone(Frequencies, Modulations, Coalition)
  
  local ffs = {}
   for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.1f",_f))
+    table.insert(ffs,string.format("%.3f",_f))
   end
   
  local freqs = table.concat(ffs, ",")
@@ -2258,6 +2270,71 @@ function MSRS._HoundTranslate(Message,Parameters,CallbackFunction)
   return
 end
 
+--- Create and run a radio jammer for a number of seconds on given frequencies. Requires HOUND backend v0.2.0-beta5 or better.
+-- @param #MSRS self
+-- @param #table Frequencies The table of frequencies to use.
+-- @param #table Modulations The table of modulations to use.
+-- @param #number Coalition (Optional) The coalition to use. Defaults to previously set coalition on this instance.
+-- @param #string Noisetype (Optional)  One of "white" (default) | "chirp" | "harsh" | "jam".
+-- @param #number Volume (Optional) Volume 0.0–1.0  (default 1.0).
+-- @param #number Seconds (Optional) How long in seconds this jammer runs. Defaults to 30 seconds.
+-- @param #string Label (Optional) The label to use, defaults to "MSRS".
+-- @param DCS#Vec3 Vec3 (Optional) Vec3 of the sender's position.
+-- @param #boolean Encrypt (Optional) If true, use the SRS encrypt option.
+-- @param #number EncKey (Optional) If encrypt is true, use this encrypt key.
+-- @return #number ID The Jammer ID to switch the jamming off again with `MSRS.RadioJammerOff()`
+function MSRS:RadioJammerOn(Frequencies, Modulations, Coalition, Noisetype, Volume, Seconds, Label, Vec3, Encrypt, EncKey)
+ self:T(self.lid.."RadioJammerOn")
+  
+ Frequencies = UTILS.EnsureTable(Frequencies)
+ Modulations = UTILS.EnsureTable(Modulations)
+ 
+ local ffs = {}
+  for _,_f in pairs(Frequencies or self.frequencies) do
+    table.insert(ffs,string.format("%.3f",_f))
+  end
+  
+ local freqs = table.concat(ffs, ",")
+ local modus = table.concat(Modulations or self.modulations, ",")
+ -- Replace modulation
+ modus=modus:gsub("0", "AM")
+ modus=modus:gsub("1", "FM")
+ 
+ local coal=Coalition or self.coalition or coalition.side.RED
+ local secs = Seconds or 30
+ 
+ local TransmissionP = {}
+ local ProviderP = {}
+ 
+ TransmissionP.transmitter = "srs"
+ TransmissionP.freqs = freqs
+ TransmissionP.modulations = modus
+ TransmissionP.coalition = coal or self.coalition   -- number  0=spectator, 1=red, 2=blue
+ TransmissionP.name = Label or self.Label         -- string  client name shown in SRS
+ TransmissionP.point = Vec3       -- DCS Vec3 (optional) — initial transmitter position
+ TransmissionP.encrypt = Encrypt      -- bool
+ TransmissionP.encKey = EncKey       -- number  0–255
+ 
+ ProviderP.noiseType = Noisetype or "white"
+ ProviderP.volume = Volume or 1
+ 
+ local ID = HoundTTS.TransmitNoise(TransmissionP, ProviderP) 
+ 
+ self.NoiseID = ID
+ 
+ self:ScheduleOnce(secs,MSRS.RadioJammerOff,self,ID)
+ 
+ return ID
+  
+end
+
+--- Switch off a running Jammer using its ID.
+-- @param #MSRS self
+-- @param #number ID
+function MSRS:RadioJammerOff(ID)
+  return HoundTTS.KillSession(ID or self.NoiseID)
+end
+
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Config File
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Utilities/Enums.lua

@@ -523,7 +523,7 @@ ENUMS.ReportingName =
     Tornado = "Tornado",
     -- Transport / Bomber / Others
     Atlas = "A400",
-    Lancer = "B1-B",
+    Lancer = "B-1B",
     Stratofortress = "B-52H",
     Herc = "C-130",
     Hercules = "C-130J-30",
@@ -568,7 +568,7 @@ ENUMS.ReportingName =
     Apache = "AH-64",
     Chinook = "CH-47",
     Sea_Stallion = "CH-53",
-    Kiowa = "OH-58",
+    Kiowa = "OH58D",
     Seahawk = "SH-60",
     Blackhawk = "UH-60",
     Sea_King = "S-61",
@@ -2126,6 +2126,47 @@ ENUMS.Storage.weapons.containers.UH60_GAU19_RIGHT = 'weapons.containers.{UH60_GA
 ENUMS.Storage.weapons.containers.UH60_M230_RIGHT = 'weapons.containers.{UH60_M230_RIGHT}'
 ENUMS.Storage.weapons.containers.UH60L_M2_GUNNER = 'weapons.containers.{UH60L_M2_GUNNER}'
 
+
+ENUMS.Storage.weapons.adapters.GD_F100_SUU_13 = 'weapons.adapters.GD_F100_SUU-13'
+ENUMS.Storage.weapons.containers.GPU_5_POD = 'weapons.containers.{GPU_5_POD}'
+ENUMS.Storage.weapons.bombs.BOLT_117 = 'weapons.bombs.BOLT-117'
+ENUMS.Storage.weapons.shells.F100_M39_20_TP_T = 'weapons.shells.F100_M39_20_TP_T'
+ENUMS.Storage.weapons.gunmounts.M_39_F_100 = 'weapons.gunmounts.M-39 F-100'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_275_L = 'weapons.droptanks.GD_F100_TANK_275_L'
+ENUMS.Storage.weapons.bombs.BLU_4B_R_GROUP_R = 'weapons.bombs.BLU-4B_R_GROUP_R'
+ENUMS.Storage.weapons.containers.F100_CAMERA_P2 = 'weapons.containers.F100_CAMERA_P2'
+ENUMS.Storage.weapons.containers.HB_ORD_SUU_7 = 'weapons.containers.HB_ORD_SUU_7'
+ENUMS.Storage.weapons.adapters.SidewinderPylon = 'weapons.adapters.SidewinderPylon'
+ENUMS.Storage.weapons.adapters.apu_470 = 'weapons.adapters.apu_470'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_335_R = 'weapons.droptanks.GD_F100_TANK_335_R'
+ENUMS.Storage.weapons.bombs.BLU_3B_R_GROUP_R = 'weapons.bombs.BLU-3B_R_GROUP_R'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_335_L = 'weapons.droptanks.GD_F100_TANK_335_L'
+ENUMS.Storage.weapons.adapters.mbdz_u2t = 'weapons.adapters.mbdz_u2t'
+ENUMS.Storage.weapons.containers.ZellRocket = 'weapons.containers.ZellRocket'
+ENUMS.Storage.weapons.containers.apu_73 = 'weapons.containers.apu-73'
+ENUMS.Storage.weapons.gunmounts.GAU_13 = 'weapons.gunmounts.GAU-13'
+ENUMS.Storage.weapons.shells.F100_M39_20_TP = 'weapons.shells.F100_M39_20_TP'
+ENUMS.Storage.weapons.shells.F100_M39_20_API = 'weapons.shells.F100_M39_20_API'
+ENUMS.Storage.weapons.adapters.bdz_umk2b = 'weapons.adapters.bdz_umk2b'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_450 = 'weapons.droptanks.GD_F100_TANK_450'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_275_R = 'weapons.droptanks.GD_F100_TANK_275_R'
+ENUMS.Storage.weapons.bombs.BLU_18_B_GROUP = 'weapons.bombs.BLU-18/B_GROUP'
+ENUMS.Storage.weapons.containers.ZELL_Booster = 'weapons.containers.ZELL Booster'
+ENUMS.Storage.weapons.adapters.apu_60 = 'weapons.adapters.apu_60'
+ENUMS.Storage.weapons.gunmounts.GPU_5_POD = 'weapons.gunmounts.{GPU_5_POD}'
+ENUMS.Storage.weapons.containers.F100_CAMERA_KA71A = 'weapons.containers.F100_CAMERA_KA71A'
+ENUMS.Storage.weapons.bombs.BLU_3_R_GROUP_R = 'weapons.bombs.BLU-3_R_GROUP_R'
+ENUMS.Storage.weapons.shells.F100_M39_20_HEI = 'weapons.shells.F100_M39_20_HEI'
+ENUMS.Storage.weapons.droptanks.GD_F100_TANK_200 = 'weapons.droptanks.GD_F100_TANK_200'
+ENUMS.Storage.weapons.adapters.apu_73 = 'weapons.adapters.apu-73'
+ENUMS.Storage.weapons.gunmounts.AKAN_NO_TRC = 'weapons.gunmounts.AKAN_NO_TRC'
+ENUMS.Storage.weapons.gunmounts.AKAN = 'weapons.gunmounts.AKAN'
+ENUMS.Storage.weapons.shells.F100_M39_20_HEI_T = 'weapons.shells.F100_M39_20_HEI_T'
+ENUMS.Storage.weapons.shells.F100_M39_20_API_T = 'weapons.shells.F100_M39_20_API_T'
+ENUMS.Storage.weapons.containers.GD_F100_STRIKE_CAMERA = 'weapons.containers.GD_F100_STRIKE_CAMERA'
+ENUMS.Storage.weapons.bombs.BLU_49_B = 'weapons.bombs.BLU-49/B'
+ENUMS.Storage.weapons.containers.GD_F100_SUU_13 = 'weapons.containers.GD_F100_SUU-13'
+
 ---
 -- @type ENUMS.FARPType
 -- @field #string FARP

Moose Development/Moose/Utilities/Utils.lua

@@ -2378,6 +2378,11 @@ function UTILS.IsLoadingDoorOpen( unit_name )
           BASE:T(unit_name .. " front door(s) are open or doors removed")
           return true
       end
+        
+      if type_name == "Ka-50_3" and unit:getDrawArgumentValue(38) == 1 then
+          BASE:T(unit_name .. " cockpit door is open")
+          return true
+      end
 
       if type_name=="C-130J-30" and (unit:getDrawArgumentValue(86)==1)then
         BASE:T(unit_name.." rear doors are open")

Moose Development/Moose/Wrapper/Airbase.lua

@@ -23,6 +23,7 @@
 -- @field #boolean isAirdrome Airbase is an airdrome.
 -- @field #boolean isHelipad Airbase is a helipad.
 -- @field #boolean isShip Airbase is a ship.
+-- @field #boolean isZell Airbase is a ZELL Booster.
 -- @field #table parking Parking spot data.
 -- @field #table parkingByID Parking spot data table with ID as key.
 -- @field #table parkingWhitelist List of parking spot terminal IDs considered for spawning.
@@ -458,115 +459,420 @@ AIRBASE.TheChannel = {
 
 --- Airbases of the Syria map
 --
--- * `AIRBASE.Syria.Abu_al_Duhur` Abu al-Duhur
--- * `AIRBASE.Syria.Adana_Sakirpasa` Adana Sakirpasa
--- * `AIRBASE.Syria.Akrotiri` Akrotiri
--- * `AIRBASE.Syria.Al_Qusayr` Al Qusayr
--- * `AIRBASE.Syria.Al_Dumayr` Al-Dumayr
--- * `AIRBASE.Syria.Aleppo` Aleppo
--- * `AIRBASE.Syria.An_Nasiriyah` An Nasiriyah
--- * `AIRBASE.Syria.At_Tanf` At Tanf
--- * `AIRBASE.Syria.Bassel_Al_Assad` Bassel Al-Assad
--- * `AIRBASE.Syria.Beirut_Rafic_Hariri` Beirut-Rafic Hariri
--- * `AIRBASE.Syria.Ben_Gurion` Ben Gurion
--- * `AIRBASE.Syria.Damascus` Damascus
--- * `AIRBASE.Syria.Deir_ez_Zor` Deir ez-Zor
--- * `AIRBASE.Syria.Ercan` Ercan
--- * `AIRBASE.Syria.Eyn_Shemer` Eyn Shemer
--- * `AIRBASE.Syria.Gaziantep` Gaziantep
--- * `AIRBASE.Syria.Gazipasa` Gazipasa
--- * `AIRBASE.Syria.Gecitkale` Gecitkale
--- * `AIRBASE.Syria.H` H
--- * `AIRBASE.Syria.H3` H3
--- * `AIRBASE.Syria.H3_Northwest` H3 Northwest
--- * `AIRBASE.Syria.H3_Southwest` H3 Southwest
--- * `AIRBASE.Syria.H4` H4
--- * `AIRBASE.Syria.Haifa` Haifa
--- * `AIRBASE.Syria.Hama` Hama
--- * `AIRBASE.Syria.Hatay` Hatay
--- * `AIRBASE.Syria.Hatzor` Hatzor
--- * `AIRBASE.Syria.Herzliya` Herzliya
--- * `AIRBASE.Syria.Incirlik` Incirlik
--- * `AIRBASE.Syria.Jirah` Jirah
--- * `AIRBASE.Syria.Khalkhalah` Khalkhalah
--- * `AIRBASE.Syria.Kharab_Ishk` Kharab Ishk
--- * `AIRBASE.Syria.King_Abdullah_II` King Abdullah II
--- * `AIRBASE.Syria.King_Hussein_Air_College` King Hussein Air College
--- * `AIRBASE.Syria.Kingsfield` Kingsfield
--- * `AIRBASE.Syria.Kiryat_Shmona` Kiryat Shmona
--- * `AIRBASE.Syria.Kuweires` Kuweires
--- * `AIRBASE.Syria.Lakatamia` Lakatamia
--- * `AIRBASE.Syria.Larnaca` Larnaca
--- * `AIRBASE.Syria.Marj_Ruhayyil` Marj Ruhayyil
--- * `AIRBASE.Syria.Marj_as_Sultan_North` Marj as Sultan North
--- * `AIRBASE.Syria.Marj_as_Sultan_South` Marj as Sultan South
--- * `AIRBASE.Syria.Marka` Marka
--- * `AIRBASE.Syria.Megiddo` Megiddo
--- * `AIRBASE.Syria.Mezzeh` Mezzeh
--- * `AIRBASE.Syria.Minakh` Minakh
--- * `AIRBASE.Syria.Muwaffaq_Salti` Muwaffaq Salti
--- * `AIRBASE.Syria.Naqoura` Naqoura
--- * `AIRBASE.Syria.Nicosia` Nicosia
--- * `AIRBASE.Syria.Palmachim` Palmachim
--- * `AIRBASE.Syria.Palmyra` Palmyra
--- * `AIRBASE.Syria.Paphos` Paphos
--- * `AIRBASE.Syria.Pinarbashi` Pinarbashi
--- * `AIRBASE.Syria.Prince_Hassan` Prince Hassan
--- * `AIRBASE.Syria.Qabr_as_Sitt` Qabr as Sitt
--- * `AIRBASE.Syria.Ramat_David` Ramat David
--- * `AIRBASE.Syria.Rayak` Rayak
--- * `AIRBASE.Syria.Rene_Mouawad` Rene Mouawad
--- * `AIRBASE.Syria.Rosh_Pina` Rosh Pina
--- * `AIRBASE.Syria.Ruwayshid` Ruwayshid
--- * `AIRBASE.Syria.Sanliurfa` Sanliurfa
--- * `AIRBASE.Syria.Sayqal` Sayqal
--- * `AIRBASE.Syria.Shayrat` Shayrat
--- * `AIRBASE.Syria.Tabqa` Tabqa
--- * `AIRBASE.Syria.Taftanaz` Taftanaz
--- * `AIRBASE.Syria.Tal_Siman` Tal Siman
--- * `AIRBASE.Syria.Tel_Nof` Tel Nof
--- * `AIRBASE.Syria.Tha_lah` Tha'lah
--- * `AIRBASE.Syria.Tiyas` Tiyas
--- * `AIRBASE.Syria.Wujah_Al_Hajar` Wujah Al Hajar
+-- * AIRBASE.Syria.Abu_al_Duhur
+-- * AIRBASE.Syria.Adana_Sakirpasa
+-- * AIRBASE.Syria.Adiyaman
+-- * AIRBASE.Syria.Akrotiri
+-- * AIRBASE.Syria.Al_Dumayr
+-- * AIRBASE.Syria.Al_Qusayr
+-- * AIRBASE.Syria.Aleppo
+-- * AIRBASE.Syria.An_Nasiriyah
+-- * AIRBASE.Syria.At_Tanf
+-- * AIRBASE.Syria.Bassel_Al_Assad
+-- * AIRBASE.Syria.Beirut_Rafic_Hariri
+-- * AIRBASE.Syria.Ben_Gurion
+-- * AIRBASE.Syria.Chukurova
+-- * AIRBASE.Syria.Damascus
+-- * AIRBASE.Syria.Deir_ez_Zor
+-- * AIRBASE.Syria.Diyarbakir
+-- * AIRBASE.Syria.Ercan
+-- * AIRBASE.Syria.Eyn_Shemer
+-- * AIRBASE.Syria.Gaziantep
+-- * AIRBASE.Syria.Gazipasa
+-- * AIRBASE.Syria.Gecitkale
+-- * AIRBASE.Syria.Gulechoba
+-- * AIRBASE.Syria.H3
+-- * AIRBASE.Syria.H3_Northwest
+-- * AIRBASE.Syria.H3_Southwest
+-- * AIRBASE.Syria.H4
+-- * AIRBASE.Syria.H4_Emergency
+-- * AIRBASE.Syria.HC01
+-- * AIRBASE.Syria.HC02
+-- * AIRBASE.Syria.HC03
+-- * AIRBASE.Syria.HC04
+-- * AIRBASE.Syria.HC05
+-- * AIRBASE.Syria.HC06
+-- * AIRBASE.Syria.HI01
+-- * AIRBASE.Syria.HI02
+-- * AIRBASE.Syria.HI03
+-- * AIRBASE.Syria.HI05
+-- * AIRBASE.Syria.HI06
+-- * AIRBASE.Syria.HI07
+-- * AIRBASE.Syria.HI08
+-- * AIRBASE.Syria.HI09
+-- * AIRBASE.Syria.HI11
+-- * AIRBASE.Syria.HI12
+-- * AIRBASE.Syria.HI13
+-- * AIRBASE.Syria.HI14
+-- * AIRBASE.Syria.HI15
+-- * AIRBASE.Syria.HI16
+-- * AIRBASE.Syria.HI17
+-- * AIRBASE.Syria.HI18
+-- * AIRBASE.Syria.HI20
+-- * AIRBASE.Syria.HI21
+-- * AIRBASE.Syria.HI22
+-- * AIRBASE.Syria.HI23
+-- * AIRBASE.Syria.HI24
+-- * AIRBASE.Syria.HI25
+-- * AIRBASE.Syria.HI26
+-- * AIRBASE.Syria.HJ01
+-- * AIRBASE.Syria.HJ02
+-- * AIRBASE.Syria.HJ03
+-- * AIRBASE.Syria.HJ04
+-- * AIRBASE.Syria.HL01
+-- * AIRBASE.Syria.HL02
+-- * AIRBASE.Syria.HL03
+-- * AIRBASE.Syria.HL04
+-- * AIRBASE.Syria.HL05
+-- * AIRBASE.Syria.HL06
+-- * AIRBASE.Syria.HL07
+-- * AIRBASE.Syria.HL08
+-- * AIRBASE.Syria.HL09
+-- * AIRBASE.Syria.HL10
+-- * AIRBASE.Syria.HL11
+-- * AIRBASE.Syria.HL12
+-- * AIRBASE.Syria.HL13
+-- * AIRBASE.Syria.HMed00
+-- * AIRBASE.Syria.HMed01
+-- * AIRBASE.Syria.HMed02
+-- * AIRBASE.Syria.HMed03
+-- * AIRBASE.Syria.HMed04
+-- * AIRBASE.Syria.HMed05
+-- * AIRBASE.Syria.HMed06
+-- * AIRBASE.Syria.HMed07
+-- * AIRBASE.Syria.HMed08
+-- * AIRBASE.Syria.HMed09
+-- * AIRBASE.Syria.HMed10
+-- * AIRBASE.Syria.HMed11
+-- * AIRBASE.Syria.HMed12
+-- * AIRBASE.Syria.HMed13
+-- * AIRBASE.Syria.HMed14
+-- * AIRBASE.Syria.HMed15
+-- * AIRBASE.Syria.HMed16
+-- * AIRBASE.Syria.HMed17
+-- * AIRBASE.Syria.HMed18
+-- * AIRBASE.Syria.HMed19
+-- * AIRBASE.Syria.HMed20
+-- * AIRBASE.Syria.HMed21
+-- * AIRBASE.Syria.HMed22
+-- * AIRBASE.Syria.HMed23
+-- * AIRBASE.Syria.HMed24
+-- * AIRBASE.Syria.HMed25
+-- * AIRBASE.Syria.HMed26
+-- * AIRBASE.Syria.HMed27
+-- * AIRBASE.Syria.HMed28
+-- * AIRBASE.Syria.HMed29
+-- * AIRBASE.Syria.HMed30
+-- * AIRBASE.Syria.HOil01
+-- * AIRBASE.Syria.HOil02
+-- * AIRBASE.Syria.HOil03
+-- * AIRBASE.Syria.HOil04
+-- * AIRBASE.Syria.HOil05
+-- * AIRBASE.Syria.HOil06
+-- * AIRBASE.Syria.HS02
+-- * AIRBASE.Syria.HS03
+-- * AIRBASE.Syria.HS04
+-- * AIRBASE.Syria.HS05
+-- * AIRBASE.Syria.HS06
+-- * AIRBASE.Syria.HS07
+-- * AIRBASE.Syria.HS08
+-- * AIRBASE.Syria.HS09
+-- * AIRBASE.Syria.HS10
+-- * AIRBASE.Syria.HS11
+-- * AIRBASE.Syria.HS12
+-- * AIRBASE.Syria.HS13
+-- * AIRBASE.Syria.HS14
+-- * AIRBASE.Syria.HS15
+-- * AIRBASE.Syria.HS16
+-- * AIRBASE.Syria.HS17
+-- * AIRBASE.Syria.HS18
+-- * AIRBASE.Syria.HS19
+-- * AIRBASE.Syria.HS20
+-- * AIRBASE.Syria.HS21
+-- * AIRBASE.Syria.HS22
+-- * AIRBASE.Syria.HS23
+-- * AIRBASE.Syria.HS24
+-- * AIRBASE.Syria.HS25
+-- * AIRBASE.Syria.HS26
+-- * AIRBASE.Syria.HS27
+-- * AIRBASE.Syria.HS28
+-- * AIRBASE.Syria.HS29
+-- * AIRBASE.Syria.HS30
+-- * AIRBASE.Syria.HS31
+-- * AIRBASE.Syria.HS32
+-- * AIRBASE.Syria.HS33
+-- * AIRBASE.Syria.HS34
+-- * AIRBASE.Syria.HS35
+-- * AIRBASE.Syria.HS36
+-- * AIRBASE.Syria.HS37
+-- * AIRBASE.Syria.HS38
+-- * AIRBASE.Syria.HS39
+-- * AIRBASE.Syria.HS40
+-- * AIRBASE.Syria.HS41
+-- * AIRBASE.Syria.HS42
+-- * AIRBASE.Syria.HStad01
+-- * AIRBASE.Syria.HStad02
+-- * AIRBASE.Syria.HStad03
+-- * AIRBASE.Syria.HStad04
+-- * AIRBASE.Syria.HStad05
+-- * AIRBASE.Syria.HStad06
+-- * AIRBASE.Syria.HT01
+-- * AIRBASE.Syria.HT02
+-- * AIRBASE.Syria.H_med_orig_01
+-- * AIRBASE.Syria.H_med_orig_02
+-- * AIRBASE.Syria.H_med_orig_03
+-- * AIRBASE.Syria.H_med_orig_04
+-- * AIRBASE.Syria.H_med_orig_05
+-- * AIRBASE.Syria.H_med_orig_06
+-- * AIRBASE.Syria.H_med_orig_07
+-- * AIRBASE.Syria.H_med_orig_08
+-- * AIRBASE.Syria.H_med_orig_09
+-- * AIRBASE.Syria.Haifa
+-- * AIRBASE.Syria.Hama
+-- * AIRBASE.Syria.Hatay
+-- * AIRBASE.Syria.Hatzerim
+-- * AIRBASE.Syria.Hatzor
+-- * AIRBASE.Syria.Herzliya
+-- * AIRBASE.Syria.Incirlik
+-- * AIRBASE.Syria.Jirah
+-- * AIRBASE.Syria.Kahramanmaras
+-- * AIRBASE.Syria.Kedem
+-- * AIRBASE.Syria.Khalkhalah
+-- * AIRBASE.Syria.Kharab_Ishk
+-- * AIRBASE.Syria.King_Abdullah_II
+-- * AIRBASE.Syria.King_Hussein_Air_College
+-- * AIRBASE.Syria.Kingsfield
+-- * AIRBASE.Syria.Kiryat_Shmona
+-- * AIRBASE.Syria.Konya
+-- * AIRBASE.Syria.Kuweires
+-- * AIRBASE.Syria.Lakatamia
+-- * AIRBASE.Syria.Larnaca
+-- * AIRBASE.Syria.Marj_Ruhayyil
+-- * AIRBASE.Syria.Marj_as_Sultan_North
+-- * AIRBASE.Syria.Marj_as_Sultan_South
+-- * AIRBASE.Syria.Marka
+-- * AIRBASE.Syria.Megiddo
+-- * AIRBASE.Syria.Mezzeh
+-- * AIRBASE.Syria.Minakh
+-- * AIRBASE.Syria.Muwaffaq_Salti
+-- * AIRBASE.Syria.Naqoura
+-- * AIRBASE.Syria.Nevatim
+-- * AIRBASE.Syria.Nicosia
+-- * AIRBASE.Syria.Palmachim
+-- * AIRBASE.Syria.Palmyra
+-- * AIRBASE.Syria.Paphos
+-- * AIRBASE.Syria.Pinarbashi
+-- * AIRBASE.Syria.Prince_Hassan
+-- * AIRBASE.Syria.Qabr_as_Sitt
+-- * AIRBASE.Syria.Ramat_David
+-- * AIRBASE.Syria.Rayak
+-- * AIRBASE.Syria.Rene_Mouawad
+-- * AIRBASE.Syria.Rosh_Pina
+-- * AIRBASE.Syria.Ruwayshid
+-- * AIRBASE.Syria.Sanliurfa
+-- * AIRBASE.Syria.Sanliurfa_Heliport
+-- * AIRBASE.Syria.Sayqal
+-- * AIRBASE.Syria.Shayrat
+-- * AIRBASE.Syria.T2
+-- * AIRBASE.Syria.T3
+-- * AIRBASE.Syria.Tabqa
+-- * AIRBASE.Syria.Taftanaz
+-- * AIRBASE.Syria.Tal_Siman
+-- * AIRBASE.Syria.Tel_Nof
+-- * AIRBASE.Syria.Teyman
+-- * AIRBASE.Syria.Tha_lah
+-- * AIRBASE.Syria.Tiyas
+-- * AIRBASE.Syria.Wujah_Al_Hajar
+-- * AIRBASE.Syria.Zarqa
+
 --
 -- @field Syria
 AIRBASE.Syria = {
   ["Abu_al_Duhur"] = "Abu al-Duhur",
   ["Adana_Sakirpasa"] = "Adana Sakirpasa",
+  ["Adiyaman"] = "Adiyaman",
   ["Akrotiri"] = "Akrotiri",
-  ["Al_Qusayr"] = "Al Qusayr",
   ["Al_Dumayr"] = "Al-Dumayr",
+  ["Al_Qusayr"] = "Al Qusayr",
   ["Aleppo"] = "Aleppo",
   ["An_Nasiriyah"] = "An Nasiriyah",
   ["At_Tanf"] = "At Tanf",
   ["Bassel_Al_Assad"] = "Bassel Al-Assad",
   ["Beirut_Rafic_Hariri"] = "Beirut-Rafic Hariri",
   ["Ben_Gurion"] = "Ben Gurion",
+  ["Chukurova"] = "Chukurova",
   ["Damascus"] = "Damascus",
   ["Deir_ez_Zor"] = "Deir ez-Zor",
+  ["Diyarbakir"] = "Diyarbakir",
   ["Ercan"] = "Ercan",
   ["Eyn_Shemer"] = "Eyn Shemer",
   ["Gaziantep"] = "Gaziantep",
   ["Gazipasa"] = "Gazipasa",
   ["Gecitkale"] = "Gecitkale",
-  ["H"] = "H",
+  ["Gulechoba"] = "Gulechoba",
   ["H3"] = "H3",
   ["H3_Northwest"] = "H3 Northwest",
   ["H3_Southwest"] = "H3 Southwest",
   ["H4"] = "H4",
+  ["H4_Emergency"] = "H4 Emergency",
+  ["HC01"] = "HC01",
+  ["HC02"] = "HC02",
+  ["HC03"] = "HC03",
+  ["HC04"] = "HC04",
+  ["HC05"] = "HC05",
+  ["HC06"] = "HC06",
+  ["HI01"] = "HI01",
+  ["HI02"] = "HI02",
+  ["HI03"] = "HI03",
+  ["HI05"] = "HI05",
+  ["HI06"] = "HI06",
+  ["HI07"] = "HI07",
+  ["HI08"] = "HI08",
+  ["HI09"] = "HI09",
+  ["HI11"] = "HI11",
+  ["HI12"] = "HI12",
+  ["HI13"] = "HI13",
+  ["HI14"] = "HI14",
+  ["HI15"] = "HI15",
+  ["HI16"] = "HI16",
+  ["HI17"] = "HI17",
+  ["HI18"] = "HI18",
+  ["HI20"] = "HI20",
+  ["HI21"] = "HI21",
+  ["HI22"] = "HI22",
+  ["HI23"] = "HI23",
+  ["HI24"] = "HI24",
+  ["HI25"] = "HI25",
+  ["HI26"] = "HI26",
+  ["HJ01"] = "HJ01",
+  ["HJ02"] = "HJ02",
+  ["HJ03"] = "HJ03",
+  ["HJ04"] = "HJ04",
+  ["HL01"] = "HL01",
+  ["HL02"] = "HL02",
+  ["HL03"] = "HL03",
+  ["HL04"] = "HL04",
+  ["HL05"] = "HL05",
+  ["HL06"] = "HL06",
+  ["HL07"] = "HL07",
+  ["HL08"] = "HL08",
+  ["HL09"] = "HL09",
+  ["HL10"] = "HL10",
+  ["HL11"] = "HL11",
+  ["HL12"] = "HL12",
+  ["HL13"] = "HL13",
+  ["HMed00"] = "HMed00",
+  ["HMed01"] = "HMed01",
+  ["HMed02"] = "HMed02",
+  ["HMed03"] = "HMed03",
+  ["HMed04"] = "HMed04",
+  ["HMed05"] = "HMed05",
+  ["HMed06"] = "HMed06",
+  ["HMed07"] = "HMed07",
+  ["HMed08"] = "HMed08",
+  ["HMed09"] = "HMed09",
+  ["HMed10"] = "HMed10",
+  ["HMed11"] = "HMed11",
+  ["HMed12"] = "HMed12",
+  ["HMed13"] = "HMed13",
+  ["HMed14"] = "HMed14",
+  ["HMed15"] = "HMed15",
+  ["HMed16"] = "HMed16",
+  ["HMed17"] = "HMed17",
+  ["HMed18"] = "HMed18",
+  ["HMed19"] = "HMed19",
+  ["HMed20"] = "HMed20",
+  ["HMed21"] = "HMed21",
+  ["HMed22"] = "HMed22",
+  ["HMed23"] = "HMed23",
+  ["HMed24"] = "HMed24",
+  ["HMed25"] = "HMed25",
+  ["HMed26"] = "HMed26",
+  ["HMed27"] = "HMed27",
+  ["HMed28"] = "HMed28",
+  ["HMed29"] = "HMed29",
+  ["HMed30"] = "HMed30",
+  ["HOil01"] = "HOil01",
+  ["HOil02"] = "HOil02",
+  ["HOil03"] = "HOil03",
+  ["HOil04"] = "HOil04",
+  ["HOil05"] = "HOil05",
+  ["HOil06"] = "HOil06",
+  ["HS02"] = "HS02",
+  ["HS03"] = "HS03",
+  ["HS04"] = "HS04",
+  ["HS05"] = "HS05",
+  ["HS06"] = "HS06",
+  ["HS07"] = "HS07",
+  ["HS08"] = "HS08",
+  ["HS09"] = "HS09",
+  ["HS10"] = "HS10",
+  ["HS11"] = "HS11",
+  ["HS12"] = "HS12",
+  ["HS13"] = "HS13",
+  ["HS14"] = "HS14",
+  ["HS15"] = "HS15",
+  ["HS16"] = "HS16",
+  ["HS17"] = "HS17",
+  ["HS18"] = "HS18",
+  ["HS19"] = "HS19",
+  ["HS20"] = "HS20",
+  ["HS21"] = "HS21",
+  ["HS22"] = "HS22",
+  ["HS23"] = "HS23",
+  ["HS24"] = "HS24",
+  ["HS25"] = "HS25",
+  ["HS26"] = "HS26",
+  ["HS27"] = "HS27",
+  ["HS28"] = "HS28",
+  ["HS29"] = "HS29",
+  ["HS30"] = "HS30",
+  ["HS31"] = "HS31",
+  ["HS32"] = "HS32",
+  ["HS33"] = "HS33",
+  ["HS34"] = "HS34",
+  ["HS35"] = "HS35",
+  ["HS36"] = "HS36",
+  ["HS37"] = "HS37",
+  ["HS38"] = "HS38",
+  ["HS39"] = "HS39",
+  ["HS40"] = "HS40",
+  ["HS41"] = "HS41",
+  ["HS42"] = "HS42",
+  ["HStad01"] = "HStad01",
+  ["HStad02"] = "HStad02",
+  ["HStad03"] = "HStad03",
+  ["HStad04"] = "HStad04",
+  ["HStad05"] = "HStad05",
+  ["HStad06"] = "HStad06",
+  ["HT01"] = "HT01",
+  ["HT02"] = "HT02",
+  ["H_med_orig_01"] = "H_med_orig_01",
+  ["H_med_orig_02"] = "H_med_orig_02",
+  ["H_med_orig_03"] = "H_med_orig_03",
+  ["H_med_orig_04"] = "H_med_orig_04",
+  ["H_med_orig_05"] = "H_med_orig_05",
+  ["H_med_orig_06"] = "H_med_orig_06",
+  ["H_med_orig_07"] = "H_med_orig_07",
+  ["H_med_orig_08"] = "H_med_orig_08",
+  ["H_med_orig_09"] = "H_med_orig_09",
   ["Haifa"] = "Haifa",
   ["Hama"] = "Hama",
   ["Hatay"] = "Hatay",
+  ["Hatzerim"] = "Hatzerim",
   ["Hatzor"] = "Hatzor",
   ["Herzliya"] = "Herzliya",
   ["Incirlik"] = "Incirlik",
   ["Jirah"] = "Jirah",
+  ["Kahramanmaras"] = "Kahramanmaras",
+  ["Kedem"] = "Kedem",
   ["Khalkhalah"] = "Khalkhalah",
   ["Kharab_Ishk"] = "Kharab Ishk",
   ["King_Abdullah_II"] = "King Abdullah II",
   ["King_Hussein_Air_College"] = "King Hussein Air College",
   ["Kingsfield"] = "Kingsfield",
   ["Kiryat_Shmona"] = "Kiryat Shmona",
+  ["Konya"] = "Konya",
   ["Kuweires"] = "Kuweires",
   ["Lakatamia"] = "Lakatamia",
   ["Larnaca"] = "Larnaca",
@@ -579,6 +885,7 @@ AIRBASE.Syria = {
   ["Minakh"] = "Minakh",
   ["Muwaffaq_Salti"] = "Muwaffaq Salti",
   ["Naqoura"] = "Naqoura",
+  ["Nevatim"] = "Nevatim",
   ["Nicosia"] = "Nicosia",
   ["Palmachim"] = "Palmachim",
   ["Palmyra"] = "Palmyra",
@@ -592,15 +899,20 @@ AIRBASE.Syria = {
   ["Rosh_Pina"] = "Rosh Pina",
   ["Ruwayshid"] = "Ruwayshid",
   ["Sanliurfa"] = "Sanliurfa",
+  ["Sanliurfa_Heliport"] = "Sanliurfa Heliport",
   ["Sayqal"] = "Sayqal",
   ["Shayrat"] = "Shayrat",
+  ["T2"] = "T2",
+  ["T3"] = "T3",
   ["Tabqa"] = "Tabqa",
   ["Taftanaz"] = "Taftanaz",
   ["Tal_Siman"] = "Tal Siman",
   ["Tel_Nof"] = "Tel Nof",
+  ["Teyman"] = "Teyman",
   ["Tha_lah"] = "Tha'lah",
   ["Tiyas"] = "Tiyas",
   ["Wujah_Al_Hajar"] = "Wujah Al Hajar",
+  ["Zarqa"] = "Zarqa",
 }
 
 --- Airbases of the Mariana Islands map
@@ -1673,6 +1985,7 @@ elseif self.category==Airbase.Category.SHIP then
     self.category=Airbase.Category.HELIPAD
     _DATABASE:AddStatic(AirbaseName)
   end
+  if self:GetTypeName() == "Zell" then self.isZell = true end
 else
   self:E("ERROR: Unknown airbase category!")
 end
@@ -2122,6 +2435,13 @@ function AIRBASE:IsShip()
   return self.isShip
 end
 
+--- Check if airbase is a ZELL booster.
+-- @param #AIRBASE self
+-- @return #boolean If true, airbase is a ZELL booster.
+function AIRBASE:IsZell()
+  return self.isZell
+end
+
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Parking
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Setup/Moose.files

@@ -112,6 +112,7 @@ Ops/OpsZone.lua
 Ops/ArmyGroup.lua
 Ops/OpsTransport.lua
 Ops/Target.lua
+Ops/TARS.lua
 
 Sound/UserSound.lua
 Sound/SoundOutput.lua