Merge pull request #2604 from FlightControl-Master/leka1986-patch-2

Fix aircraft model names for Lancer and Kiowa

Moose Development/Moose/Core/ScheduleDispatcher.lua

@@ -246,11 +246,11 @@ function SCHEDULEDISPATCHER:AddSchedule( Scheduler, ScheduleFunction, ScheduleAr
           -- self:T3( { Repeat = CallID, CurrentTime, ScheduleTime, ScheduleArguments } )
           return ScheduleTime -- returns the next time the function needs to be called.
         else
-          self:_Reclaim( Scheduler, CallID )
+          self:Stop( Scheduler, CallID )
         end
 
       else
-        self:_Reclaim( Scheduler, CallID )
+        self:Stop( Scheduler, CallID )
       end
     else
       self:I( "<<<>" .. Name .. ":" .. Line .. " (" .. Source .. ")" )

Moose Development/Moose/Ops/EasyGCICAP.lua

@@ -135,6 +135,7 @@
 --          local mywing = EASYGCICAP:New("Blue CAP Operations",AIRBASE.Caucasus.Kutaisi,"blue","Blue EWR")
 --          
 --          -- Add a CAP patrol point belonging to our airbase, we'll be at 30k ft doing 400 kn, initial direction 90 degrees (East), leg 20NM
+--          -- NOTE - Skip this function and do not create CAP Points if you want GCI behaviour only.
 --          mywing:AddPatrolPointCAP(AIRBASE.Caucasus.Kutaisi,ZONE:FindByName("Blue Zone 1"):GetCoordinate(),30000,400,90,20)
 --          
 --          -- Add a Squadron with template "Blue Sq1 M2000c", 20 airframes, skill good, Modex starting with 102 and skin "Vendee Jeanne"
@@ -190,9 +191,10 @@
 -- * @{#EASYGCICAP.SetDefaultResurrection}: Set how many seconds the AirWing stays inoperable after the AirWing STATIC HQ ist destroyed, default 900 secs. 
 -- * @{#EASYGCICAP.SetDefaultCAPSpeed}: Set how many knots the CAP flights should do (will be altitude corrected), default 300 kn.
 -- * @{#EASYGCICAP.SetDefaultCAPAlt}: Set at which altitude (ASL) the CAP planes will fly, default 25,000 ft.
+-- * @{#EASYGCICAP.SetDefaultINTERCEPTAlt}: Set at which altitude (ASL) the Intercept planes will fly, default 25,000 ft.
 -- * @{#EASYGCICAP.SetDefaultCAPDirection}: Set the initial direction from the CAP point the planes will fly in degrees, default is 90°.
 -- * @{#EASYGCICAP.SetDefaultCAPLeg}: Set the length of the CAP leg, default is 15 NM.
--- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CVAP/GCI), defaults to 2.
+-- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CAP/GCI), defaults to 2.
 -- * @{#EASYGCICAP.SetDefaultMissionRange}: Set how many NM the planes can go from the home base, defaults to 100.
 -- * @{#EASYGCICAP.SetDefaultNumberAlert5Standby}: Set how many planes will be spawned on cold standby (Alert5), default 2.
 -- * @{#EASYGCICAP.SetDefaultEngageRange}: Set max engage range for CAP flights if they detect intruders, defaults to 50.
@@ -286,7 +288,7 @@ EASYGCICAP = {
 
 --- EASYGCICAP class version.
 -- @field #string version
-EASYGCICAP.version="0.1.36"
+EASYGCICAP.version="0.1.38"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- 
@@ -587,6 +589,17 @@ function EASYGCICAP:SetDefaultCAPAlt(Altitude)
   return self
 end
 
+--- Set default INTERCEPT Altitude in feet
+-- @param #EASYGCICAP self
+-- @param #number Altitude (Optional) Altitude defaults to 25000
+-- @return #EASYGCICAP self
+function EASYGCICAP:SetDefaultINTERCEPTAlt(Altitude)
+  self:T(self.lid.."SetDefaultINTERCEPTAlt")
+  self.interceptalt = Altitude or 25000
+  return self
+end
+--
+
 --- Set default CAP lieg initial direction in degrees
 -- @param #EASYGCICAP self
 -- @param #number Direction (Optional) Direction defaults to 90 (East)
@@ -754,6 +767,15 @@ end
 function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   self:T(self.lid.."_AddAirwing "..Airbasename)
   
+    -- Gather Some Stats
+  local function counttable(tbl)
+    local count = 0
+    for _,_data in pairs(tbl) do
+      count = count + 1
+    end
+    return count
+  end
+  
   local CapFormation = self.CapFormation
   local DespawnAfterLanding = self.DespawnAfterLanding
   local DespawnAfterHolding = self.DespawnAfterHolding
@@ -772,7 +794,11 @@ function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   CAP_Wing:SetMarker(false)
   CAP_Wing:SetAirbase(AIRBASE:FindByName(Airbasename))
   CAP_Wing:SetRespawnAfterDestroyed()
-  CAP_Wing:SetNumberCAP(self.capgrouping)
+  
+  --- #DONE avoid wings with no CAP points starting CAP anyhow; AirWing uses this to start CAP and creates points when there are none.
+  if counttable(self.ManagedCP) >0 then
+    CAP_Wing:SetNumberCAP(self.capgrouping)
+  end
   CAP_Wing:SetCapCloseRaceTrack(true)
     
   if self.showpatrolpointmarks then
@@ -1039,7 +1065,7 @@ function EASYGCICAP:_SetCAPPatrolPoints()
       MESSAGE:New(self.lid.."You are trying to create a CAP point for which there is no wing! "..tostring(data.AirbaseName),30,"CHECK"):ToAllIf(self.debug):ToLog()
       return
     end
-    local Wing = self.wings[data.AirbaseName][1] -- Ops.Airwing#AIRWING
+    local Wing = self.wings[data.AirbaseName][1] -- Ops.AirWing#AIRWING
     local Coordinate = data.Coordinate
     local Altitude = data.Altitude
     local Speed = data.Speed 
@@ -1505,6 +1531,7 @@ function EASYGCICAP:_AssignIntercept(Cluster)
   local overhead = self.overhead
   local capspeed = self.capspeed + 100
   local capalt = self.capalt
+  local interalt = self.interceptalt or self.capalt
   local maxsize = self.maxinterceptsize
   local repeatsonfailure = self.repeatsonfailure
   
@@ -1592,6 +1619,7 @@ function EASYGCICAP:_AssignIntercept(Cluster)
           :SetRepeatOnFailure(repeats)
           :SetMissionSpeed(UTILS.KnotsToAltKIAS(capspeed,capalt))
           :SetMissionAltitude(capalt)
+          :SetEngageAltitude(interalt)
           
           if nogozoneset:Count() > 0 then
             InterceptAuftrag:AddConditionSuccess(

Moose Development/Moose/Sound/SRS.lua

@@ -2108,7 +2108,7 @@ function MSRS:_HoundTextToSpeech(Message,Frequencies,Modulations,Volume,Label,Co
     
   local ffs = {}
   for _,_f in pairs(Frequencies) do
-    table.insert(ffs,string.format("%.1f",_f))
+    table.insert(ffs,string.format("%.3f",_f))
   end
   
   local freqs = table.concat(ffs, ",")
@@ -2214,7 +2214,7 @@ function MSRS:_HoundTestTone(Frequencies, Modulations, Coalition)
  
  local ffs = {}
   for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.1f",_f))
+    table.insert(ffs,string.format("%.3f",_f))
   end
   
  local freqs = table.concat(ffs, ",")
@@ -2291,7 +2291,7 @@ function MSRS:RadioJammerOn(Frequencies, Modulations, Coalition, Noisetype, Volu
  
  local ffs = {}
   for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.1f",_f))
+    table.insert(ffs,string.format("%.3f",_f))
   end
   
  local freqs = table.concat(ffs, ",")

Moose Development/Moose/Utilities/Enums.lua

@@ -523,7 +523,7 @@ ENUMS.ReportingName =
     Tornado = "Tornado",
     -- Transport / Bomber / Others
     Atlas = "A400",
-    Lancer = "B1-B",
+    Lancer = "B-1B",
     Stratofortress = "B-52H",
     Herc = "C-130",
     Hercules = "C-130J-30",
@@ -568,7 +568,7 @@ ENUMS.ReportingName =
     Apache = "AH-64",
     Chinook = "CH-47",
     Sea_Stallion = "CH-53",
-    Kiowa = "OH-58",
+    Kiowa = "OH58D",
     Seahawk = "SH-60",
     Blackhawk = "UH-60",
     Sea_King = "S-61",

Moose Development/Moose/Utilities/Utils.lua

@@ -2378,6 +2378,11 @@ function UTILS.IsLoadingDoorOpen( unit_name )
           BASE:T(unit_name .. " front door(s) are open or doors removed")
           return true
       end
+        
+      if type_name == "Ka-50_3" and unit:getDrawArgumentValue(38) == 1 then
+          BASE:T(unit_name .. " cockpit door is open")
+          return true
+      end
 
       if type_name=="C-130J-30" and (unit:getDrawArgumentValue(86)==1)then
         BASE:T(unit_name.." rear doors are open")