Merge remote-tracking branch 'origin/master-ng' into develop

Merge from master

Moose Development/Moose/Core/Event.lua

@@ -1453,11 +1453,7 @@ function EVENT:onEvent( Event )
       -- Weapon.
       if Event.weapon and type(Event.weapon) == "table" and Event.weapon.isExist and Event.weapon:isExist() then
         Event.Weapon = Event.weapon
-        if Event.weapon_name == "ZELL Booster" then 
-          Event.WeaponName = "ZELL Booster"
-        else
-          Event.WeaponName = Event.weapon:isExist() and Event.weapon.getTypeName and Event.weapon:getTypeName() or "Unknown Weapon"
-        end
+        Event.WeaponName = Event.weapon:isExist() and Event.weapon.getTypeName and Event.weapon:getTypeName() or "Unknown Weapon"
         if Event.weapon_name == "ZELL Booster" then Event.WeaponName = "ZELL Booster" end
         Event.WeaponUNIT = CLIENT:Find( Event.Weapon, '', true ) -- Sometimes, the weapon is a player unit!
         Event.WeaponPlayerName = Event.WeaponUNIT and Event.Weapon.getPlayerName and Event.Weapon:getPlayerName()

Moose Development/Moose/Core/ScheduleDispatcher.lua

@@ -375,13 +375,3 @@ function SCHEDULEDISPATCHER:NoTrace( Scheduler )
   Scheduler.ShowTrace = false
 end
 
---- Helper for memory cleanup for self stopping schedulers
--- @param #SCHEDULEDISPATCHER self
--- @param Core.Scheduler#SCHEDULER Scheduler Scheduler object.
--- @param #string CallID (Optional) Scheduler Call ID.
-function SCHEDULEDISPATCHER:_Reclaim( Scheduler, CallID )
-  self:Stop( Scheduler, CallID )                          -- remove DCS timer, nil ScheduleID
-  if self.Schedule[Scheduler] then self.Schedule[Scheduler][CallID] = nil end
-  self.ObjectSchedulers[CallID]     = nil
-  self.PersistentSchedulers[CallID] = nil
-end

Moose Development/Moose/Ops/Airboss.lua

@@ -4201,16 +4201,13 @@ function AIRBOSS:_CheckRecoveryTimes()
         -- Time into the wind 1 day or if longer recovery time + the 5 min early.
         local t = math.max( nextwindow.STOP - nextwindow.START + self.dTturn, 60 * 60 * 24 )
 
-         -- Recovery wind on deck in knots.
-        -- NOTE: Do NOT clamp the desired wind-over-deck (WOD) to the carrier's max hull
-        -- speed here. WOD = carrier speed + headwind, so a WOD target above the hull's
-        -- top speed is achievable whenever there is wind. CarrierTurnIntoWind ->
-        -- GetHeadingIntoWind already converts the WOD target into the required hull
-        -- speed and caps THAT at the carrier's max speed (Vmax) internally. Clamping the
-        -- WOD target itself capped achievable WOD at ~30 kts (the supercarrier's max
-        -- hull speed) even in strong wind, which made high-WOD recovery windows fall
-        -- short of their requested value.
+        -- Recovery wind on deck in knots.
         local v = UTILS.KnotsToMps( nextwindow.SPEED )
+
+        -- Check that we do not go above max possible speed.
+        local vmax = self.carrier:GetSpeedMax() / 3.6 -- convert to m/s
+        v = math.min( v, vmax )
+
         -- Route carrier into the wind. Sets self.turnintowind=true
         self:CarrierTurnIntoWind( t, v, uturn )
 

Moose Development/Moose/Ops/EasyGCICAP.lua

@@ -135,7 +135,6 @@
 --          local mywing = EASYGCICAP:New("Blue CAP Operations",AIRBASE.Caucasus.Kutaisi,"blue","Blue EWR")
 --          
 --          -- Add a CAP patrol point belonging to our airbase, we'll be at 30k ft doing 400 kn, initial direction 90 degrees (East), leg 20NM
---          -- NOTE - Skip this function and do not create CAP Points if you want GCI behaviour only.
 --          mywing:AddPatrolPointCAP(AIRBASE.Caucasus.Kutaisi,ZONE:FindByName("Blue Zone 1"):GetCoordinate(),30000,400,90,20)
 --          
 --          -- Add a Squadron with template "Blue Sq1 M2000c", 20 airframes, skill good, Modex starting with 102 and skin "Vendee Jeanne"
@@ -191,10 +190,9 @@
 -- * @{#EASYGCICAP.SetDefaultResurrection}: Set how many seconds the AirWing stays inoperable after the AirWing STATIC HQ ist destroyed, default 900 secs. 
 -- * @{#EASYGCICAP.SetDefaultCAPSpeed}: Set how many knots the CAP flights should do (will be altitude corrected), default 300 kn.
 -- * @{#EASYGCICAP.SetDefaultCAPAlt}: Set at which altitude (ASL) the CAP planes will fly, default 25,000 ft.
--- * @{#EASYGCICAP.SetDefaultINTERCEPTAlt}: Set at which altitude (ASL) the Intercept planes will fly, default 25,000 ft.
 -- * @{#EASYGCICAP.SetDefaultCAPDirection}: Set the initial direction from the CAP point the planes will fly in degrees, default is 90°.
 -- * @{#EASYGCICAP.SetDefaultCAPLeg}: Set the length of the CAP leg, default is 15 NM.
--- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CAP/GCI), defaults to 2.
+-- * @{#EASYGCICAP.SetDefaultCAPGrouping}: Set how many planes will be spawned per mission (CVAP/GCI), defaults to 2.
 -- * @{#EASYGCICAP.SetDefaultMissionRange}: Set how many NM the planes can go from the home base, defaults to 100.
 -- * @{#EASYGCICAP.SetDefaultNumberAlert5Standby}: Set how many planes will be spawned on cold standby (Alert5), default 2.
 -- * @{#EASYGCICAP.SetDefaultEngageRange}: Set max engage range for CAP flights if they detect intruders, defaults to 50.
@@ -288,7 +286,7 @@ EASYGCICAP = {
 
 --- EASYGCICAP class version.
 -- @field #string version
-EASYGCICAP.version="0.1.38"
+EASYGCICAP.version="0.1.36"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- 
@@ -589,17 +587,6 @@ function EASYGCICAP:SetDefaultCAPAlt(Altitude)
   return self
 end
 
---- Set default INTERCEPT Altitude in feet
--- @param #EASYGCICAP self
--- @param #number Altitude (Optional) Altitude defaults to 25000
--- @return #EASYGCICAP self
-function EASYGCICAP:SetDefaultINTERCEPTAlt(Altitude)
-  self:T(self.lid.."SetDefaultINTERCEPTAlt")
-  self.interceptalt = Altitude or 25000
-  return self
-end
---
-
 --- Set default CAP lieg initial direction in degrees
 -- @param #EASYGCICAP self
 -- @param #number Direction (Optional) Direction defaults to 90 (East)
@@ -767,15 +754,6 @@ end
 function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   self:T(self.lid.."_AddAirwing "..Airbasename)
   
-    -- Gather Some Stats
-  local function counttable(tbl)
-    local count = 0
-    for _,_data in pairs(tbl) do
-      count = count + 1
-    end
-    return count
-  end
-  
   local CapFormation = self.CapFormation
   local DespawnAfterLanding = self.DespawnAfterLanding
   local DespawnAfterHolding = self.DespawnAfterHolding
@@ -794,11 +772,7 @@ function EASYGCICAP:_AddAirwing(Airbasename, Alias)
   CAP_Wing:SetMarker(false)
   CAP_Wing:SetAirbase(AIRBASE:FindByName(Airbasename))
   CAP_Wing:SetRespawnAfterDestroyed()
-  
-  --- #DONE avoid wings with no CAP points starting CAP anyhow; AirWing uses this to start CAP and creates points when there are none.
-  if counttable(self.ManagedCP) >0 then
-    CAP_Wing:SetNumberCAP(self.capgrouping)
-  end
+  CAP_Wing:SetNumberCAP(self.capgrouping)
   CAP_Wing:SetCapCloseRaceTrack(true)
     
   if self.showpatrolpointmarks then
@@ -1065,7 +1039,7 @@ function EASYGCICAP:_SetCAPPatrolPoints()
       MESSAGE:New(self.lid.."You are trying to create a CAP point for which there is no wing! "..tostring(data.AirbaseName),30,"CHECK"):ToAllIf(self.debug):ToLog()
       return
     end
-    local Wing = self.wings[data.AirbaseName][1] -- Ops.AirWing#AIRWING
+    local Wing = self.wings[data.AirbaseName][1] -- Ops.Airwing#AIRWING
     local Coordinate = data.Coordinate
     local Altitude = data.Altitude
     local Speed = data.Speed 
@@ -1531,7 +1505,6 @@ function EASYGCICAP:_AssignIntercept(Cluster)
   local overhead = self.overhead
   local capspeed = self.capspeed + 100
   local capalt = self.capalt
-  local interalt = self.interceptalt or self.capalt
   local maxsize = self.maxinterceptsize
   local repeatsonfailure = self.repeatsonfailure
   
@@ -1619,7 +1592,6 @@ function EASYGCICAP:_AssignIntercept(Cluster)
           :SetRepeatOnFailure(repeats)
           :SetMissionSpeed(UTILS.KnotsToAltKIAS(capspeed,capalt))
           :SetMissionAltitude(capalt)
-          :SetEngageAltitude(interalt)
           
           if nogozoneset:Count() > 0 then
             InterceptAuftrag:AddConditionSuccess(

Moose Development/Moose/Sound/SRS.lua

@@ -2108,7 +2108,7 @@ function MSRS:_HoundTextToSpeech(Message,Frequencies,Modulations,Volume,Label,Co
     
   local ffs = {}
   for _,_f in pairs(Frequencies) do
-    table.insert(ffs,string.format("%.3f",_f))
+    table.insert(ffs,string.format("%.1f",_f))
   end
   
   local freqs = table.concat(ffs, ",")
@@ -2214,7 +2214,7 @@ function MSRS:_HoundTestTone(Frequencies, Modulations, Coalition)
  
  local ffs = {}
   for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.3f",_f))
+    table.insert(ffs,string.format("%.1f",_f))
   end
   
  local freqs = table.concat(ffs, ",")
@@ -2291,7 +2291,7 @@ function MSRS:RadioJammerOn(Frequencies, Modulations, Coalition, Noisetype, Volu
  
  local ffs = {}
   for _,_f in pairs(Frequencies or self.frequencies) do
-    table.insert(ffs,string.format("%.3f",_f))
+    table.insert(ffs,string.format("%.1f",_f))
   end
   
  local freqs = table.concat(ffs, ",")

Moose Development/Moose/Utilities/Enums.lua

@@ -523,7 +523,7 @@ ENUMS.ReportingName =
     Tornado = "Tornado",
     -- Transport / Bomber / Others
     Atlas = "A400",
-    Lancer = "B-1B",
+    Lancer = "B1-B",
     Stratofortress = "B-52H",
     Herc = "C-130",
     Hercules = "C-130J-30",
@@ -568,7 +568,7 @@ ENUMS.ReportingName =
     Apache = "AH-64",
     Chinook = "CH-47",
     Sea_Stallion = "CH-53",
-    Kiowa = "OH58D",
+    Kiowa = "OH-58",
     Seahawk = "SH-60",
     Blackhawk = "UH-60",
     Sea_King = "S-61",

Moose Development/Moose/Utilities/Utils.lua

@@ -2378,11 +2378,6 @@ function UTILS.IsLoadingDoorOpen( unit_name )
           BASE:T(unit_name .. " front door(s) are open or doors removed")
           return true
       end
-        
-      if type_name == "Ka-50_3" and unit:getDrawArgumentValue(38) == 1 then
-          BASE:T(unit_name .. " cockpit door is open")
-          return true
-      end
 
       if type_name=="C-130J-30" and (unit:getDrawArgumentValue(86)==1)then
         BASE:T(unit_name.." rear doors are open")