Ops

Moose Development/Moose/Ops/AirWing.lua

@@ -493,7 +493,7 @@ function AIRWING:onafterStatus(From, Event, To)
   local fsmstate=self:GetState()
   
   -- Check CAP missions.
-  self:CheckCAP()
+  --self:CheckCAP()
   
   --self:CheckTANKER()
   
@@ -934,7 +934,7 @@ end
 function AIRWING:onafterAssetDead(From, Event, To, asset, request)
 
   -- Call parent warehouse function first.
-  self:GetParent(self).onafterAssetDead(From, Event, To, asset, request)
+  self:GetParent(self).onafterAssetDead(self, From, Event, To, asset, request)
 
   -- Add group to the detection set of the WINGCOMMANDER.
   if self.wingcommander then

Moose Development/Moose/Ops/Auftrag.lua

@@ -256,7 +256,7 @@ function AUFTRAG:New(Type)
   self:SetMissionTime()
   
   self.missionRepeated=0
-  self.missionRepeatMax=1
+  self.missionRepeatMax=0
   
   -- FMS start state is PLANNED.
   self:SetStartState(self.status)
@@ -780,10 +780,6 @@ function AUFTRAG:onafterStatus(From, Event, To)
     self:Cancel()
   end
   
-  if self:IsNotOver() and #self.assets==0 then
-    self:Cancel()
-  end
-  
   -- Check if ALL flights are done with their mission.
   if self:IsNotOver() and self:CheckFlightsDone() then
     self:Done()
@@ -804,12 +800,9 @@ function AUFTRAG:onafterStatus(From, Event, To)
     self:E(self.lid..string.format("ERROR: FSM state %s != %s mission status!", fsmstate, self.status))
   end
 
-  -- Check if mission is OVER.
+  -- Check if mission is OVER (done or cancelled).
   if self:IsOver() then
-    -- TODO: evaluate mission result. self.Ntargets>0 and Ntargets=?
-    -- TODO: if failed, repeat mission, i.e. set status to PLANNED? if success, stop and remove from ALL queues.
-    --self:Stop()
-    
+    -- Evaluate success or failure of the mission.
     self:Evaluate()
   else
     self:__Status(-30)
@@ -1039,18 +1032,32 @@ function AUFTRAG:onafterAssetDead(From, Event, To, Asset)
   
     if self:IsNotOver() then
     
-      -- Mission failed.
-      self:Failed()
+      -- Cancel mission. Wait for next update to evaluate SUCCESS or FAILURE.
+      self:Cancel()
       
     else
-    
-      self:Stop()
+      
+      self:E(self.lid.."ERROR: All assets are dead not but mission was already over... Investigate!")
       
     end
   end
 
 end
 
+--- On after "Success" event.
+-- @param #AUFTRAG self
+-- @param #string From From state.
+-- @param #string Event Event.
+-- @param #string To To state.
+function AUFTRAG:onafterSuccess(From, Event, To)
+
+  self.status=AUFTRAG.Status.SUCCESS
+  self:I(self.lid..string.format("New mission status=%s", self.status))
+  
+  -- Stop mission.
+  self:Stop()
+
+end
 
 --- On after "Cancel" event. Cancells the mission.
 -- @param #AUFTRAG self
@@ -1109,6 +1116,9 @@ end
 -- @param #string To To state.
 function AUFTRAG:onafterRepeat(From, Event, To)
 
+  self.status=AUFTRAG.Status.PLANNED
+  self:I(self.lid..string.format("New mission status=%s (on Repeat)", self.status))  
+
   -- Increase repeat counter.
   self.missionRepeated=self.missionRepeated+1
   
@@ -1117,21 +1127,16 @@ function AUFTRAG:onafterRepeat(From, Event, To)
   elseif self.airwing then
   
   
+  else
+  
   end
+  
+  -- No mission assets.
+  self.assets={}  
 
 end
 
---- On after "Success" event.
--- @param #AUFTRAG self
--- @param #string From From state.
--- @param #string Event Event.
--- @param #string To To state.
-function AUFTRAG:onafterSuccess(From, Event, To)
 
-  self.status=AUFTRAG.Status.SUCCESS
-  self:I(self.lid..string.format("New mission status=%s", self.status))
-
-end
 
 --- On after "Stop" event. Remove mission from AIRWING and FLIGHTGROUP mission queues.
 -- @param #AUFTRAG self
@@ -1140,6 +1145,9 @@ end
 -- @param #string To To state.
 function AUFTRAG:onafterStop(From, Event, To)
 
+  self.status="Stopped"
+  self:I(self.lid..string.format("New mission status=%s. Removing missions from queues. Stopping CallScheduler!", self.status))  
+
   -- TODO: remove missions from queues in WINGCOMMANDER, AIRWING and FLIGHGROUPS!
   
   -- TODO: Mission should be OVER! we dont want to remove running missions from any queues.

Moose Development/Moose/Ops/FlightGroup.lua

@@ -596,7 +596,7 @@ function FLIGHTGROUP:AddTask(task, clock, description, prio, duration)
   
   -- Info.
   self:I(self.lid..string.format("Adding SCHEDULED task %s starting at %s", newtask.description, UTILS.SecondsToClock(time, true)))
-  self:T2({newtask=newtask})
+  self:T3({newtask=newtask})
 
   return newtask
 end
@@ -633,7 +633,7 @@ function FLIGHTGROUP:AddTaskWaypoint(task, waypointindex, description, prio, dur
   
   -- Info.
   self:I(self.lid..string.format("Adding WAYPOINT task %s at WP %d", newtask.description, newtask.waypoint))
-  self:T2({newtask=newtask})
+  self:T3({newtask=newtask})
   
   -- Update route.
   self:__UpdateRoute(-1)
@@ -2218,10 +2218,10 @@ function FLIGHTGROUP:onbeforeUpdateRoute(From, Event, To, n)
 
   if self.group and self.group:IsAlive() and self:IsAirborne() then
     -- Alive & Airborne ==> Update route possible.
-    self:T2(self.lid.."Update route possible. Group is ALIVE and AIRBORNE")
+    self:T3(self.lid.."Update route possible. Group is ALIVE and AIRBORNE")
   elseif self:IsDead() then
     -- Group is dead! No more updates.
-    self:T3(self.lid.."FF update route denied. Group is DEAD!")
+    self:E(self.lid.."Update route denied. Group is DEAD!")
     allowed=false
   else
     -- Not airborne yet. Try again in 1 sec.
@@ -2231,14 +2231,12 @@ function FLIGHTGROUP:onbeforeUpdateRoute(From, Event, To, n)
   end
   
   if n and n<1 then
-    self:T3(self.lid.."FF update route denied because n<1")
-    self:__UpdateRoute(-1, n)
+    self:E(self.lid.."Update route denied because waypoint n<1!")
     allowed=false  
   end
   
   if not self.currentwp then
-    self:T3(self.lid.."FF update route denied because self.currentwp=nil")
-    self:__UpdateRoute(-1, n)
+    self:E(self.lid.."Update route denied because self.currentwp=nil!")
     allowed=false    
   end
   
@@ -2250,12 +2248,12 @@ function FLIGHTGROUP:onbeforeUpdateRoute(From, Event, To, n)
   end
   
   if self.taskcurrent>0 then
-    self:I(self.lid.."FF update route denied because taskcurrent>0")
+    self:E(self.lid.."Update route denied because taskcurrent>0")
     allowed=false
   end
   
+  -- Not good, because mission will never start. Better only check if there is a current task!
   if self.currentmission then
-    -- Not good, because mission will never start. Better only check if there is a current task!
     --self:I(self.lid.."FF update route denied because currentmission~=nil")
     --allowed=false
   end
@@ -2384,7 +2382,7 @@ function FLIGHTGROUP:onafterPassingWaypoint(From, Event, To, n, N)
   else
     text=text.." None"
   end
-  self:I(self.lid..text)
+  self:T(self.lid..text)
   
 
   -- Tasks at this waypoints.
@@ -3229,7 +3227,7 @@ end
 -- @param Ops.Auftrag#AUFTRAG Mission The mission table.
 function FLIGHTGROUP:onbeforeMissionStart(From, Event, To, Mission)
 
-  self:I(self.lid..string.format("FF Starting mission %s, FSM=%s, LateActivated=%s, UnControlled=%s", tostring(Mission.name), self:GetState(), tostring(self:IsLateActivated()), tostring(self:IsUncontrolled())))
+  self:I(self.lid..string.format("Starting mission %s, FSM=%s, LateActivated=%s, UnControlled=%s", tostring(Mission.name), self:GetState(), tostring(self:IsLateActivated()), tostring(self:IsUncontrolled())))
 
   -- Delay for route to mission. Group needs to be activated and controlled.
   local delay=0
@@ -3962,10 +3960,6 @@ function FLIGHTGROUP:GetNextWaypoint()
     Nextwp=self.currentwp+1
   end
 
-  -- Debug output
-  local text=string.format("Current WP=%d/%d, next WP=%d", self.currentwp, #self.waypoints, Nextwp)
-  self:T2(self.lid..text)
-
   -- Next waypoint.
   local nextwp=self.waypoints[Nextwp] --Core.Point#COORDINATE
 
@@ -3992,7 +3986,8 @@ function FLIGHTGROUP:_UpdateWaypointTasks()
     
     if i>self.currentwp or nwaypoints==1 then
     
-      self:I(self.lid..string.format("Updating waypoint task for waypoint %d/%d. Last waypoint passed %d.", i, nwaypoints, self.currentwp))
+      -- Debug info.
+      self:T2(self.lid..string.format("Updating waypoint task for waypoint %d/%d. Last waypoint passed %d.", i, nwaypoints, self.currentwp))
   
       -- Tasks of this waypoint
       local taskswp={}
@@ -4363,7 +4358,7 @@ function FLIGHTGROUP:_AllSimilarStatus(status)
   end
 
   -- Debug info.
-  self:T2(self.lid..string.format("All %d elements have similar status %s ==> returning TRUE", #self.elements, status))
+  self:T3(self.lid..string.format("All %d elements have similar status %s ==> returning TRUE", #self.elements, status))
   
   return true
 end
@@ -4860,7 +4855,6 @@ function FLIGHTGROUP:_GetPlayerUnitAndName(_unitName)
       local playername=DCSunit:getPlayerName()
       local unit=UNIT:Find(DCSunit)
     
-      self:T2({DCSunit=DCSunit, unit=unit, playername=playername})
       if DCSunit and unit and playername then
         return unit, playername
       end
@@ -4972,7 +4966,6 @@ function FLIGHTGROUP:GetParking(airbase)
   local function _overlap(l1,l2,dist)
     local safedist=(l1/2+l2/2)*1.05  -- 5% safety margine added to safe distance!
     local safe = (dist > safedist)
-    self:T3(string.format("l1=%.1f l2=%.1f s=%.1f d=%.1f ==> safe=%s", l1,l2,safedist,dist,tostring(safe)))
     return safe
   end