mirror of
https://github.com/FlightControl-Master/MOOSE_MISSIONS.git
synced 2026-08-25 13:02:11 +00:00
funkyfranky
72 lines
2.6 KiB
Lua
72 lines
2.6 KiB
Lua
---
|
|
-- NAVYGROUP: Passing Waypoints
|
|
--
|
|
-- Naval group "USS Normandy Group" has four waypoints set in the Mission editor:
|
|
-- 1.) Initial positon at speed 0 knots
|
|
-- 2.) Heading North at 25 knots.
|
|
-- 3.) Heading North-West at 15 knots.
|
|
-- 4.) Heading South at 30 knots (full speed).
|
|
--
|
|
-- After passing waypoint 4, the group will proceed eastwards to waypoint 1 and redo the route until all eternaty.
|
|
-- Note that usually a waypoint speed of zero is dangerous.
|
|
--
|
|
-- When a group passes a waypoint, it will trigger an event "PassingWaypoint" which can be captured by the OnAfterPassingWaypoint() function.
|
|
--
|
|
---
|
|
|
|
-- Create a NAVYGROUP object and activate the late activated group.
|
|
local navygroup=NAVYGROUP:New("USS Normandy Group")
|
|
navygroup:Activate()
|
|
|
|
--- Function called each time the group passes a waypoint.
|
|
function navygroup:OnAfterPassingWaypoint(From, Event, To, Waypoint)
|
|
local waypoint=Waypoint --Ops.OpsGroup#OPSGROUP.Waypoint
|
|
|
|
-- Debug info.
|
|
local text=string.format("Group passed waypoint ID=%d (Index=%d) for the %d. time", waypoint.uid, navygroup:GetWaypointIndex(waypoint.uid), waypoint.npassed)
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
|
|
end
|
|
|
|
--- Function called when the group is cruising. This is the "normal" state when the group follows its waypoints.
|
|
function navygroup:OnAfterCruise(From, Event, To)
|
|
local text="Group is cruising"
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
end
|
|
|
|
--- Function called when the groups starts to turn.
|
|
function navygroup:OnAfterTurningStarted(From, Event, To)
|
|
local text="Group started turning"
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
end
|
|
|
|
--- Function called when the group stopps to turn.
|
|
function navygroup:OnAfterTurningStopped(From, Event, To)
|
|
local text="Group stopped turning"
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
end
|
|
|
|
-- Monitor entering and leaving zones. There are four zones named "Zone Leg 1", "Zone Leg 2", ...
|
|
local ZoneSet=SET_ZONE:New():FilterPrefixes("Zone Leg"):FilterOnce()
|
|
|
|
-- Set zones which are checked if the group enters or leaves it.
|
|
navygroup:SetCheckZones(ZoneSet)
|
|
|
|
--- Function called when the group enteres a zone.
|
|
function navygroup:OnAfterEnterZone(From, Event, To, Zone)
|
|
local text=string.format("Group entered zone %s", Zone:GetName())
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
end
|
|
|
|
--- Function called when the group leaves a zone.
|
|
function navygroup:OnAfterLeaveZone(From, Event, To, Zone)
|
|
local text=string.format("Group left zone %s", Zone:GetName())
|
|
MESSAGE:New(text, 60):ToAll()
|
|
env.info(text)
|
|
end
|