Updated Moose.lua

Tasking/Task_A2G_Dispatcher/TAD-A2G-000 - AREAS - Detection test/TAD-A2G-000 - AREAS - Detection test.lua

@@ -1,51 +1,51 @@
- ---
--- Name: TAD-A2G-000 - AREAS - Detection test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- # Situation:
--- 
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-000 - AREAS - Detection test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-001 - AREAS - Destroy Test/TAD-A2G-001 - AREAS - Destroy Test.lua

@@ -1,52 +1,52 @@
- ---
--- Name: TAD-A2G-001 - AREAS - Destroy Test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
--- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
--- Join the A2G Task that was dispatched to you.
--- Once the AI in your group destroys the target, you should see that the A2G task got success.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-001 - AREAS - Destroy Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+-- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
+-- Join the A2G Task that was dispatched to you.
+-- Once the AI in your group destroys the target, you should see that the A2G task got success.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-002 - AREAS - Task Success Test/TAD-A2G-002 - AREAS - Task Success Test.lua

@@ -1,66 +1,66 @@
- ---
--- Name: TAD-A2G-002 - AREAS - Task Success Test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
--- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
--- Join the A2G Task that was dispatched to you.
--- Once the AI in your group destroys the target, you should see that the A2G task got success.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
-
-
---- Success Handler OnAfter for TaskDispatcher
--- @function [parent=#TaskDispatcher] OnAfterSuccess
--- @param #TaskDispatcher self
--- @param #string From
--- @param #string Event
--- @param #string To
--- @param Tasking.Task#TASK Task
-function TaskDispatcher:OnAfterSuccess( From, Event, To, Task )
-  self:E( "Task Success!!!" )
-end
-
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-002 - AREAS - Task Success Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+-- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
+-- Join the A2G Task that was dispatched to you.
+-- Once the AI in your group destroys the target, you should see that the A2G task got success.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+
+
+--- Success Handler OnAfter for TaskDispatcher
+-- @function [parent=#TaskDispatcher] OnAfterSuccess
+-- @param #TaskDispatcher self
+-- @param #string From
+-- @param #string Event
+-- @param #string To
+-- @param Tasking.Task#TASK Task
+function TaskDispatcher:OnAfterSuccess( From, Event, To, Task )
+  self:E( "Task Success!!!" )
+end
+
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-010 - AREAS - Split SEAD to BAI and SEAD/TAD-A2G-010 - AREAS - Split SEAD to BAI and SEAD.lua

@@ -1,50 +1,50 @@
--- Name: TAD-A2G-010 - AREAS - Split SEAD to BAI and SEAD
--- Author: FlightControl
--- Date Created: 05 Dec 2017
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone.
--- While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task!
--- This is only applicable for AREA detections. Other detection methods won't have this dynamic.
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High",
-        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
-        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
-        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
-        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
-        coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+-- Name: TAD-A2G-010 - AREAS - Split SEAD to BAI and SEAD
+-- Author: FlightControl
+-- Date Created: 05 Dec 2017
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone.
+-- While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task!
+-- This is only applicable for AREA detections. Other detection methods won't have this dynamic.
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High",
+        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
+        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
+        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
+        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
+        coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-011 - AREAS - Split SEAD to CAS and SEAD/TAD-A2G-011 - AREAS - Split SEAD to CAS and SEAD.lua

@@ -1,50 +1,50 @@
--- Name: TAD-A2G-011 - AREAS - Split SEAD to CAS and SEAD
--- Author: FlightControl
--- Date Created: 05 Dec 2017
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- This test is about a SEAD task, dispatched, that is split into a SEAD and CAS task, when units are moving away from the zone.
--- While the units are moving away, monitor if the task is correctly split into a SEAD and CAS task!
--- This is only applicable for AREA detections. Other detection methods won't have this dynamic.
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High",
-        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
-        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
-        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
-        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
-        coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+-- Name: TAD-A2G-011 - AREAS - Split SEAD to CAS and SEAD
+-- Author: FlightControl
+-- Date Created: 05 Dec 2017
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- This test is about a SEAD task, dispatched, that is split into a SEAD and CAS task, when units are moving away from the zone.
+-- While the units are moving away, monitor if the task is correctly split into a SEAD and CAS task!
+-- This is only applicable for AREA detections. Other detection methods won't have this dynamic.
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High",
+        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
+        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
+        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
+        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
+        coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-020 - AREAS - Remain BAI as Player/TAD-A2G-020 - AREAS - Remain BAI as Player.lua

@@ -1,52 +1,52 @@
--- Name: TAD-A2G-020 - AREAS - Remain BAI as a Player
--- Author: FlightControl
--- Date Created: 20 Dec 2017
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- This test is about checking that if a player in the air is approaching a BAI task zone, that the task is not converted to a CAS!
--- Jump into the helicopter. Fly to the blue targets. They won't fire at you.
--- The su-34 will detect the blue targets, but will report a BAI task, even if you are in the helicopter are near to the targets.
--- This is a very important aspect of BAI. 
--- Only ground units should be considered as friendlies and would convert a task in CAS if near the enemy.
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High",
-        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
-        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
-        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
-        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
-        coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+-- Name: TAD-A2G-020 - AREAS - Remain BAI as a Player
+-- Author: FlightControl
+-- Date Created: 20 Dec 2017
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- This test is about checking that if a player in the air is approaching a BAI task zone, that the task is not converted to a CAS!
+-- Jump into the helicopter. Fly to the blue targets. They won't fire at you.
+-- The su-34 will detect the blue targets, but will report a BAI task, even if you are in the helicopter are near to the targets.
+-- This is a very important aspect of BAI. 
+-- Only ground units should be considered as friendlies and would convert a task in CAS if near the enemy.
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High",
+        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
+        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
+        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
+        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
+        coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-021 - AREAS - Remain BAI as AI/TAD-A2G-021 - AREAS - Remain BAI as AI.lua

@@ -1,52 +1,52 @@
--- Name: TAD-A2G-021 - AREAS - Remain BAI as AI
--- Author: FlightControl
--- Date Created: 20 Dec 2017
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- This test is about checking that if a player in the air is approaching a BAI task zone, that the task is not converted to a CAS!
--- Jump into the su-25T. The AI Helicopter Attack will fly to the detected blue targets. They won't fire at the helicopters.
--- The su-34 will detect the blue targets, but will report a BAI task, even if the AI helicopters is near the targets.
--- This is a very important aspect of BAI. 
--- Only ground units should be considered as friendlies and would convert a task in CAS if near the enemy.
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High",
-        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
-        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
-        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
-        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
-        coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+-- Name: TAD-A2G-021 - AREAS - Remain BAI as AI
+-- Author: FlightControl
+-- Date Created: 20 Dec 2017
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- This test is about checking that if a player in the air is approaching a BAI task zone, that the task is not converted to a CAS!
+-- Jump into the su-25T. The AI Helicopter Attack will fly to the detected blue targets. They won't fire at the helicopters.
+-- The su-34 will detect the blue targets, but will report a BAI task, even if the AI helicopters is near the targets.
+-- This is a very important aspect of BAI. 
+-- Only ground units should be considered as friendlies and would convert a task in CAS if near the enemy.
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High",
+        "This mission demonstrates the dynamic task dispatching for Air to Ground operations. " ..
+        "This test is about a SEAD task, dispatched, that is split into a SEAD and BAI task, when units are moving away from the zone. " ..
+        "While the units are moving away, monitor if the task is correctly split into a SEAD and BAI task! " ..
+        "This is only applicable for AREA detections. Other detection methods won't have this dynamic.",
+        coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-090 - AREAS - WWII - Reference Points/TAD-A2G-090 - AREAS - WWII - Reference Points.lua

@@ -1,34 +1,34 @@
--- Name: TAD-A2G-090 - AREAS - WWII - Reference Points
--- Author: FlightControl
--- Date Created: 17 Mar 2017
---
--- Test if the Command Center is working in WWII mode, and that it selects the closest Reference points for each target...
--- Join both tasks sequentially (abort when done), and see if the reference points are selected correctly, following the closest ref point logic.
--- 
--- 1. Join the Attack group of RED.
--- 2. Wait until the blue tank is detected.
--- 3. Three tasks will de defined, CAS and BAI tasks.
--- 4. Join each task using the radio menus.
--- 5. Observe that the correct WWII compatible reference points are shown.
-
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Bravo" )
-CommandCenter:SetModeWWII()
-CommandCenter:SetReferenceZones( "Village" )
-
-local Mission = MISSION
-  :New( CommandCenter, 
-        "Overlord", 
-        "Primary", 
-        "Join each task as a result of the detected targets reported. " .. 
-        "Observe that the correct Targets are reported from the correct reference points! " ..
-        "\n1. Target #001 -> Village#Dziguri" ..
-        "\n2. Target #002 -> Village#Horshi" ..
-        "\n3. Target #003 -> Village#Machkhvareti"
-        , coalition.side.RED )
-
-local RecceSet = SET_GROUP:New():FilterPrefixes( "Recce" ):FilterCoalitions( "red" ):FilterStart()
-local DetectionAreas = DETECTION_AREAS:New( RecceSet, 500 )
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, DetectionAreas )
+-- Name: TAD-A2G-090 - AREAS - WWII - Reference Points
+-- Author: FlightControl
+-- Date Created: 17 Mar 2017
+--
+-- Test if the Command Center is working in WWII mode, and that it selects the closest Reference points for each target...
+-- Join both tasks sequentially (abort when done), and see if the reference points are selected correctly, following the closest ref point logic.
+-- 
+-- 1. Join the Attack group of RED.
+-- 2. Wait until the blue tank is detected.
+-- 3. Three tasks will de defined, CAS and BAI tasks.
+-- 4. Join each task using the radio menus.
+-- 5. Observe that the correct WWII compatible reference points are shown.
+
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Bravo" )
+CommandCenter:SetModeWWII()
+CommandCenter:SetReferenceZones( "Village" )
+
+local Mission = MISSION
+  :New( CommandCenter, 
+        "Overlord", 
+        "Primary", 
+        "Join each task as a result of the detected targets reported. " .. 
+        "Observe that the correct Targets are reported from the correct reference points! " ..
+        "\n1. Target #001 -> Village#Dziguri" ..
+        "\n2. Target #002 -> Village#Horshi" ..
+        "\n3. Target #003 -> Village#Machkhvareti"
+        , coalition.side.RED )
+
+local RecceSet = SET_GROUP:New():FilterPrefixes( "Recce" ):FilterCoalitions( "red" ):FilterStart()
+local DetectionAreas = DETECTION_AREAS:New( RecceSet, 500 )
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, DetectionAreas )

Tasking/Task_A2G_Dispatcher/TAD-A2G-100 - TYPES - Detection Test/TAD-A2G-100 - TYPES - Detection test.lua

@@ -0,0 +1,51 @@
+ ---
+-- Name: TAD-A2G-100 - TYPES - Detection Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_TYPES method, which groups detected targets into Unit Types that were detected.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_TYPES
+  :New( RecceSet )  -- The RecceSet will detect the enemies, and group them into unit types that were detected.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-110 - TYPES - Detection Test/TAD-110 - A2G Task Dispatching DETECTION_TYPES.lua

@@ -1,35 +1,35 @@
- ---
--- Name: TAD-100 - A2G Task Dispatching DETECTION_AREAS
--- Author: FlightControl
--- Date Created: 06 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- FACA's and FAC's are patrolling around the battle zone, while detecting targets.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into zones.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
---    For test, each zone will have a circle of tyres, that are visible on the map too.
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local FACAreas = DETECTION_TYPES:New( FACSet )
-
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
-
+ ---
+-- Name: TAD-100 - A2G Task Dispatching DETECTION_AREAS
+-- Author: FlightControl
+-- Date Created: 06 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- FACA's and FAC's are patrolling around the battle zone, while detecting targets.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into zones.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+--    For test, each zone will have a circle of tyres, that are visible on the map too.
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local FACAreas = DETECTION_TYPES:New( FACSet )
+
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
+

Tasking/Task_A2G_Dispatcher/TAD-A2G-120 - TYPES - Scoring/TAD-220 - A2G Task Dispatching per TYPE and SCORING.lua

@@ -1,64 +1,64 @@
----
--- Name: TAD-220 - A2G Task Dispatching per TYPE and SCORING
--- Author: FlightControl
--- Date Created: 20 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
--- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
--- 5. Restart the mission, and crash into the ground, check if you can get penalties.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local DetectionTypes = DETECTION_TYPES:New( FACSet )
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, DetectionTypes )
-
---- @param #TaskDispatcher self
--- @param From 
--- @param Event
--- @param To
--- @param Tasking.Task_A2G#TASK_A2G Task
--- @param Wrapper.Unit#UNIT TaskUnit
--- @param #string PlayerName
-function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
-  self:E( "I am in assigned ... " )
-  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 50, TaskUnit )
-  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
-  Task:SetScoreOnFail( "The task has failed completion!", 100, TaskUnit )
-end
-
--- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
--- This is just an example, but many more examples can follow...
-
--- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
--- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
--- too early!
-
-function Mission:OnBeforeComplete( From, Event, To )
-  local Group004 = GROUP:FindByName( "Target #004" )
-  if Group004:IsAlive() == false then
-    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
-    return true
-  end
-  return false
+---
+-- Name: TAD-220 - A2G Task Dispatching per TYPE and SCORING
+-- Author: FlightControl
+-- Date Created: 20 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
+-- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
+-- 5. Restart the mission, and crash into the ground, check if you can get penalties.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local DetectionTypes = DETECTION_TYPES:New( FACSet )
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, DetectionTypes )
+
+--- @param #TaskDispatcher self
+-- @param From 
+-- @param Event
+-- @param To
+-- @param Tasking.Task_A2G#TASK_A2G Task
+-- @param Wrapper.Unit#UNIT TaskUnit
+-- @param #string PlayerName
+function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
+  self:E( "I am in assigned ... " )
+  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 50, TaskUnit )
+  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
+  Task:SetScoreOnFail( "The task has failed completion!", 100, TaskUnit )
+end
+
+-- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
+-- This is just an example, but many more examples can follow...
+
+-- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
+-- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
+-- too early!
+
+function Mission:OnBeforeComplete( From, Event, To )
+  local Group004 = GROUP:FindByName( "Target #004" )
+  if Group004:IsAlive() == false then
+    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
+    return true
+  end
+  return false
 end

Tasking/Task_A2G_Dispatcher/TAD-A2G-200 - UNITS - Detection Test/TAD-A2G-200 - UNITS - Detection Test.lua

@@ -1,51 +1,51 @@
- ---
--- Name: TAD-A2G-200 - UNITS - Detection Test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- # Situation:
--- 
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_UNITS method, which groups detected targets per detected unit.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_UNITS
-  :New( RecceSet )  -- The RecceSet will detect the enemies, and group them per detected unit.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-200 - UNITS - Detection Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_UNITS method, which groups detected targets per detected unit.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_UNITS
+  :New( RecceSet )  -- The RecceSet will detect the enemies, and group them per detected unit.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-210 - UNITS - Detection Test/TAD-120 - A2G Task Dispatching DETECTION_UNITS.lua

@@ -1,50 +1,50 @@
----
--- Name: TAD-120 - A2G Task Dispatching DETECTION_UNITS
--- Author: FlightControl
--- Date Created: 13 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- FACA's and FAC's are patrolling around the battle field, while detecting targets.
--- The detection method used is the DETECTION_UNITS method, which groups detected targets per detected unit.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local FACAreas = DETECTION_UNITS:New( FACSet )
-
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
-
--- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
--- This is just an example, but many more examples can follow...
-
--- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
--- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
--- too early!
-
-function Mission:OnBeforeComplete( From, Event, To )
-  local Group004 = GROUP:FindByName( "Target #004" )
-  if Group004:IsAlive() == false then
-    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
-    return true
-  end
-  return false
+---
+-- Name: TAD-120 - A2G Task Dispatching DETECTION_UNITS
+-- Author: FlightControl
+-- Date Created: 13 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- FACA's and FAC's are patrolling around the battle field, while detecting targets.
+-- The detection method used is the DETECTION_UNITS method, which groups detected targets per detected unit.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local FACAreas = DETECTION_UNITS:New( FACSet )
+
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
+
+-- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
+-- This is just an example, but many more examples can follow...
+
+-- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
+-- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
+-- too early!
+
+function Mission:OnBeforeComplete( From, Event, To )
+  local Group004 = GROUP:FindByName( "Target #004" )
+  if Group004:IsAlive() == false then
+    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
+    return true
+  end
+  return false
 end

Tasking/Task_A2G_Dispatcher/TAD-A2G-220 - UNITS - Scoring/TAD-200 - A2G Task Dispatching with SCORING.lua

@@ -1,64 +1,64 @@
----
--- Name: TAD-200 - A2G Task Dispatching with SCORING
--- Author: FlightControl
--- Date Created: 19 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
--- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
--- 5. Restart the mission, and crash into the ground, check if you can get penalties.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local FACAreas = DETECTION_UNITS:New( FACSet )
-
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
-
---- @param #TaskDispatcher self
--- @param From 
--- @param Event
--- @param To
--- @param Tasking.Task_A2G#TASK_A2G Task
--- @param Wrapper.Unit#UNIT TaskUnit
--- @param #string PlayerName
-function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
-  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
-  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
-  Task:SetScoreOnFail( "The task has failed completion!", -100, TaskUnit )
-end
-
--- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
--- This is just an example, but many more examples can follow...
-
--- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
--- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
--- too early!
-
-function Mission:OnBeforeComplete( From, Event, To )
-  local Group004 = GROUP:FindByName( "Target #004" )
-  if Group004:IsAlive() == false then
-    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
-    return true
-  end
-  return false
+---
+-- Name: TAD-200 - A2G Task Dispatching with SCORING
+-- Author: FlightControl
+-- Date Created: 19 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
+-- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
+-- 5. Restart the mission, and crash into the ground, check if you can get penalties.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local FACAreas = DETECTION_UNITS:New( FACSet )
+
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
+
+--- @param #TaskDispatcher self
+-- @param From 
+-- @param Event
+-- @param To
+-- @param Tasking.Task_A2G#TASK_A2G Task
+-- @param Wrapper.Unit#UNIT TaskUnit
+-- @param #string PlayerName
+function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
+  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
+  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
+  Task:SetScoreOnFail( "The task has failed completion!", -100, TaskUnit )
+end
+
+-- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
+-- This is just an example, but many more examples can follow...
+
+-- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
+-- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
+-- too early!
+
+function Mission:OnBeforeComplete( From, Event, To )
+  local Group004 = GROUP:FindByName( "Target #004" )
+  if Group004:IsAlive() == false then
+    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
+    return true
+  end
+  return false
 end

Tasking/Task_A2G_Dispatcher/TAD-A2G-320 - AREAS - Scoring/TAD-210 - A2G Task Dispatching #1 for AREAS and SCORING.lua

@@ -1,65 +1,65 @@
----
--- Name: TAD-210 - A2G Task Dispatching #1 for AREAS and SCORING
--- Author: FlightControl
--- Date Created: 19 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
--- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
--- 5. Restart the mission, and crash into the ground, check if you can get penalties.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local FACAreas = DETECTION_AREAS:New( FACSet, 400 )
-FACAreas:BoundDetectedZones()
-
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
-
---- @param #TaskDispatcher self
--- @param From 
--- @param Event
--- @param To
--- @param Tasking.Task_A2G#TASK_A2G Task
--- @param Wrapper.Unit#UNIT TaskUnit
--- @param #string PlayerName
-function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
-  Task:SetScoreOnDestroy( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
-  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
-  Task:SetPenaltyOnFailed( "The task has failed completion!", -100, TaskUnit )
-end
-
--- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
--- This is just an example, but many more examples can follow...
-
--- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
--- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
--- too early!
-
-function Mission:OnBeforeComplete( From, Event, To )
-  local Group004 = GROUP:FindByName( "Target #004" )
-  if Group004:IsAlive() == false then
-    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
-    return true
-  end
-  return false
+---
+-- Name: TAD-210 - A2G Task Dispatching #1 for AREAS and SCORING
+-- Author: FlightControl
+-- Date Created: 19 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
+-- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
+-- 5. Restart the mission, and crash into the ground, check if you can get penalties.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local FACAreas = DETECTION_AREAS:New( FACSet, 400 )
+FACAreas:BoundDetectedZones()
+
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
+
+--- @param #TaskDispatcher self
+-- @param From 
+-- @param Event
+-- @param To
+-- @param Tasking.Task_A2G#TASK_A2G Task
+-- @param Wrapper.Unit#UNIT TaskUnit
+-- @param #string PlayerName
+function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
+  Task:SetScoreOnDestroy( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
+  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
+  Task:SetPenaltyOnFailed( "The task has failed completion!", -100, TaskUnit )
+end
+
+-- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
+-- This is just an example, but many more examples can follow...
+
+-- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
+-- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
+-- too early!
+
+function Mission:OnBeforeComplete( From, Event, To )
+  local Group004 = GROUP:FindByName( "Target #004" )
+  if Group004:IsAlive() == false then
+    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
+    return true
+  end
+  return false
 end

Tasking/Task_A2G_Dispatcher/TAD-A2G-320 - AREAS - Scoring/TAD-210 - A2G Task Dispatching per AREAS and SCORING.lua

@@ -1,65 +1,65 @@
----
--- Name: TAD-210 - A2G Task Dispatching for AREAS and SCORING
--- Author: FlightControl
--- Date Created: 19 Mar 2017
---
--- # Situation:
--- 
--- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
--- 
--- # Test cases: 
--- 
--- 1. Observe the FAC(A)'s detecting targets and grouping them. 
--- 2. Check that the HQ provides menus to engage on a task set by the FACs.
--- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
--- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
--- 5. Restart the mission, and crash into the ground, check if you can get penalties.
--- 
-local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
-
-local Scoring = SCORING:New( "Detect Demo" )
-
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
-  :AddScoring( Scoring )
-
-local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
-
-local FACAreas = DETECTION_AREAS:New( FACSet, 400 )
-FACAreas:BoundDetectedZones()
-
-
-local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
-
-TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
-
---- @param #TaskDispatcher self
--- @param From 
--- @param Event
--- @param To
--- @param Tasking.Task_A2G#TASK_A2G Task
--- @param Wrapper.Unit#UNIT TaskUnit
--- @param #string PlayerName
-function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
-  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
-  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
-  Task:SetScoreOnFail( "The task has failed completion!", -100, TaskUnit )
-end
-
--- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
--- This is just an example, but many more examples can follow...
-
--- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
--- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
--- too early!
-
-function Mission:OnBeforeComplete( From, Event, To )
-  local Group004 = GROUP:FindByName( "Target #004" )
-  if Group004:IsAlive() == false then
-    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
-    return true
-  end
-  return false
+---
+-- Name: TAD-210 - A2G Task Dispatching for AREAS and SCORING
+-- Author: FlightControl
+-- Date Created: 19 Mar 2017
+--
+-- # Situation:
+-- 
+-- This mission demonstrates the scoring of dynamic task dispatching for Air to Ground operations.
+-- 
+-- # Test cases: 
+-- 
+-- 1. Observe the FAC(A)'s detecting targets and grouping them. 
+-- 2. Check that the HQ provides menus to engage on a task set by the FACs.
+-- 3. Engage on a task and destroy a target. Check if scoring is given for that target.
+-- 4. Engage all targets in the task, and check if mission success is achieved and that a scoring is given.
+-- 5. Restart the mission, and crash into the ground, check if you can get penalties.
+-- 
+local HQ = GROUP:FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER:New( HQ, "Lima" )
+
+local Scoring = SCORING:New( "Detect Demo" )
+
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED )
+  :AddScoring( Scoring )
+
+local FACSet = SET_GROUP:New():FilterPrefixes( "FAC" ):FilterCoalitions("red"):FilterStart()
+
+local FACAreas = DETECTION_AREAS:New( FACSet, 400 )
+FACAreas:BoundDetectedZones()
+
+
+local AttackGroups = SET_GROUP:New():FilterCoalitions( "red" ):FilterPrefixes( "Attack" ):FilterStart()
+
+TaskDispatcher = TASK_A2G_DISPATCHER:New( Mission, AttackGroups, FACAreas )
+
+--- @param #TaskDispatcher self
+-- @param From 
+-- @param Event
+-- @param To
+-- @param Tasking.Task_A2G#TASK_A2G Task
+-- @param Wrapper.Unit#UNIT TaskUnit
+-- @param #string PlayerName
+function TaskDispatcher:OnAfterAssign( From, Event, To, Task, TaskUnit, PlayerName )
+  Task:SetScoreOnProgress( "Player " .. PlayerName .. " destroyed a target", 20, TaskUnit )
+  Task:SetScoreOnSuccess( "The task has been successfully completed!", 200, TaskUnit )
+  Task:SetScoreOnFail( "The task has failed completion!", -100, TaskUnit )
+end
+
+-- Now this is REALLY neat. I set the goal of the mission to be the destruction of Target #004.
+-- This is just an example, but many more examples can follow...
+
+-- Every time a Task becomes Successful, it will trigger the Complete event in the Mission.
+-- The mission designer NEED TO OVERRIDE the OnBeforeComplete to prevent the mission from getting into completion 
+-- too early!
+
+function Mission:OnBeforeComplete( From, Event, To )
+  local Group004 = GROUP:FindByName( "Target #004" )
+  if Group004:IsAlive() == false then
+    Mission:GetCommandCenter():MessageToCoalition( "Mission Complete!" )
+    return true
+  end
+  return false
 end

Tasking/Task_A2G_Dispatcher/TAD-A2G-601 - ZONES - Destroy/TAD-A2G-001 - AREAS - Destroy Test.lua

@@ -1,52 +1,52 @@
- ---
--- Name: TAD-A2G-001 - AREAS - Destroy Test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
--- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
--- Join the A2G Task that was dispatched to you.
--- Once the AI in your group destroys the target, you should see that the A2G task got success.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
--- Define the RecceSet that will detect the enemy.
-local RecceSet = SET_GROUP
-  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
-  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
-  :FilterCoalitions("red") -- only the red coalition.
-  :FilterStart() -- Start the dynamic building of the set.
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionAreas = DETECTION_AREAS
-  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-001 - AREAS - Destroy Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+-- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
+-- Join the A2G Task that was dispatched to you.
+-- Once the AI in your group destroys the target, you should see that the A2G task got success.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+-- Define the RecceSet that will detect the enemy.
+local RecceSet = SET_GROUP
+  :New()  -- Create the RecceSet, which is the set of groups detecting the enemy locations.
+  :FilterPrefixes( "Recce" ) -- All Recce groups start with the name "Recce".
+  :FilterCoalitions("red") -- only the red coalition.
+  :FilterStart() -- Start the dynamic building of the set.
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionAreas = DETECTION_AREAS
+  :New( RecceSet, 3000 )  -- The RecceSet will detect the enemies, and group them into areas of a 3 km radius.
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionAreas ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )

Tasking/Task_A2G_Dispatcher/TAD-A2G-601 - ZONES - Destroy/TAD-A2G-601 - ZONES - Destroy.lua

@@ -1,47 +1,47 @@
- ---
--- Name: TAD-A2G-001 - AREAS - Destroy Test
--- Author: FlightControl
--- Date Created: 15 Mar 2018
---
--- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
--- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
--- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
--- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
--- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
--- Observe that A2G Tasks are being dispatched to the player.
--- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
--- Join the A2G Task that was dispatched to you.
--- Once the AI in your group destroys the target, you should see that the A2G task got success.
-
-
--- Declare the Command Center 
-local HQ = GROUP
-  :FindByName( "HQ", "Bravo HQ" )
-
-local CommandCenter = COMMANDCENTER
-  :New( HQ, "Lima" ) -- Create the CommandCenter.
-  
--- Declare the Mission for the Command Center.
-local Mission = MISSION
-  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
-
-
--- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
-local DetectionSetZones = SET_ZONE:New():FilterPrefixes( { "Detection Zone Blue" } ):FilterOnce()
-
-local DetectionZones = DETECTION_ZONES:New( DetectionSetZones, coalition.side.BLUE )
-
--- Setup the AttackSet, which is a SET_GROUP.
--- The SET_GROUP is a dynamic collection of GROUP objects.  
-local AttackSet = SET_GROUP
-  :New()  -- Create the SET_GROUP object.
-  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
-  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
-  :FilterStart() -- Start the dynamic building of the set.
-  
--- Now we have everything to setup the main A2G TaskDispatcher.
-TaskDispatcher = TASK_A2G_DISPATCHER
-  :New( Mission, AttackSet, DetectionZones ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
-
--- We use the MISSILETRAINER for demonstration purposes.
-MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )
+ ---
+-- Name: TAD-A2G-001 - AREAS - Destroy Test
+-- Author: FlightControl
+-- Date Created: 15 Mar 2018
+--
+-- This mission demonstrates the dynamic task dispatching for Air to Ground operations.
+-- Reconnassance vehicles are placed at strategic locations, scanning for the enemy locations.
+-- The detection method used is the DETECTION_AREAS method, which groups detected targets into areas.
+-- The AttackSet will engage upon the enemy, which is a Set of Groups seated by Players.
+-- A2G Tasks are being dispatched to the Players as enemy locations are being detected by the Recce.
+-- Observe that A2G Tasks are being dispatched to the player.
+-- Get seated in the Attack Plane, there is also an AI with you, who will attack the ground targets.
+-- Join the A2G Task that was dispatched to you.
+-- Once the AI in your group destroys the target, you should see that the A2G task got success.
+
+
+-- Declare the Command Center 
+local HQ = GROUP
+  :FindByName( "HQ", "Bravo HQ" )
+
+local CommandCenter = COMMANDCENTER
+  :New( HQ, "Lima" ) -- Create the CommandCenter.
+  
+-- Declare the Mission for the Command Center.
+local Mission = MISSION
+  :New( CommandCenter, "Overlord", "High", "Attack Detect Mission Briefing", coalition.side.RED ) -- Create the Mission.
+
+
+-- Setup the detection. We use DETECTION_AREAS to detect and group the enemies.
+local DetectionSetZones = SET_ZONE:New():FilterPrefixes( { "Detection Zone Blue" } ):FilterOnce()
+
+local DetectionZones = DETECTION_ZONES:New( DetectionSetZones, coalition.side.BLUE )
+
+-- Setup the AttackSet, which is a SET_GROUP.
+-- The SET_GROUP is a dynamic collection of GROUP objects.  
+local AttackSet = SET_GROUP
+  :New()  -- Create the SET_GROUP object.
+  :FilterCoalitions( "red" ) -- Only incorporate the RED coalitions.
+  :FilterPrefixes( "Attack" ) -- Only incorporate groups that start with the name Attack.
+  :FilterStart() -- Start the dynamic building of the set.
+  
+-- Now we have everything to setup the main A2G TaskDispatcher.
+TaskDispatcher = TASK_A2G_DISPATCHER
+  :New( Mission, AttackSet, DetectionZones ) -- We assign the TaskDispatcher under Mission. The AttackSet will engage the enemy and will recieve the dispatched Tasks. The DetectionAreas will report any detected enemies to the TaskDispatcher.
+
+-- We use the MISSILETRAINER for demonstration purposes.
+MissileTrainer = MISSILETRAINER:New( 100, "Missiles will be destroyed for training when they reach your plane." )