diff --git a/Documentation/AI.AI_Air.html b/Documentation/AI.AI_Air.html index 69aeca0a8..9d2c00e3c 100644 --- a/Documentation/AI.AI_Air.html +++ b/Documentation/AI.AI_Air.html @@ -3770,28 +3770,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau - - - -
-
- - #number -AI_AIR.RTBSpeedMaxFactor - - - -
- -
-
-
- - #number -AI_AIR.RTBSpeedMinFactor - - -
@@ -6645,28 +6623,6 @@ A random value in this bracket is then applied in the waypoint routing generatio - - - -
-
- - #number -AI_AIR.RTBSpeedMaxFactor - - - -
- -
-
-
- - #number -AI_AIR.RTBSpeedMinFactor - - -
@@ -7403,28 +7359,6 @@ A random value in this bracket is then applied in the waypoint routing generatio - - - -
-
- - #number -AI_AIR.RTBSpeedMaxFactor - - - -
- -
-
-
- - #number -AI_AIR.RTBSpeedMinFactor - - -
@@ -9049,28 +8983,6 @@ A random value in this bracket is then applied in the waypoint routing generatio - - - -
-
- - #number -AI_AIR.RTBSpeedMaxFactor - - - -
- -
-
-
- - #number -AI_AIR.RTBSpeedMinFactor - - -
diff --git a/Documentation/AI.AI_Cargo.html b/Documentation/AI.AI_Cargo.html index 283bc6bfb..7f09436a0 100644 --- a/Documentation/AI.AI_Cargo.html +++ b/Documentation/AI.AI_Cargo.html @@ -3342,7 +3342,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + Wrapper.Group#GROUP AI_CARGO.CargoCarrier @@ -5372,7 +5372,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + Wrapper.Group#GROUP AI_CARGO.CargoCarrier @@ -5984,7 +5984,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + Wrapper.Group#GROUP AI_CARGO.CargoCarrier @@ -7484,7 +7484,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + Wrapper.Group#GROUP AI_CARGO.CargoCarrier diff --git a/Documentation/AI.AI_Cargo_Airplane.html b/Documentation/AI.AI_Cargo_Airplane.html index bf7400e50..bf8dc500c 100644 --- a/Documentation/AI.AI_Cargo_Airplane.html +++ b/Documentation/AI.AI_Cargo_Airplane.html @@ -2368,6 +2368,9 @@ Therefore, this class is considered to be deprecated

+ +

Set destination airbase for next :Route() command.

+
@@ -2401,6 +2404,9 @@ Therefore, this class is considered to be deprecated

+ +

Aircraft is on a depoly mission.

+
@@ -2426,6 +2432,9 @@ Therefore, this class is considered to be deprecated

+ +

Aircraft is on a pickup mission.

+
diff --git a/Documentation/AI.AI_Cargo_Helicopter.html b/Documentation/AI.AI_Cargo_Helicopter.html index 9be8f6f09..cda7494b5 100644 --- a/Documentation/AI.AI_Cargo_Helicopter.html +++ b/Documentation/AI.AI_Cargo_Helicopter.html @@ -2505,22 +2505,28 @@ Therefore, this class is considered to be deprecated

- + #number AI_CARGO_HELICOPTER.landingheight + +

meter

+
- + #number AI_CARGO_HELICOPTER.landingspeed + +

kph

+
diff --git a/Documentation/AI.AI_Patrol.html b/Documentation/AI.AI_Patrol.html index 872c16d0a..b85e25d76 100644 --- a/Documentation/AI.AI_Patrol.html +++ b/Documentation/AI.AI_Patrol.html @@ -3845,9 +3845,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau - -

This table contains the targets detected during patrol.

-
@@ -7115,9 +7112,6 @@ The default interval is 30 seconds.

- -

This table contains the targets detected during patrol.

- @@ -7862,9 +7856,6 @@ The default interval is 30 seconds.

- -

This table contains the targets detected during patrol.

- @@ -9497,9 +9488,6 @@ The default interval is 30 seconds.

- -

This table contains the targets detected during patrol.

- diff --git a/Documentation/Cargo.CargoGroup.html b/Documentation/Cargo.CargoGroup.html index b92fabd97..0d579e85d 100644 --- a/Documentation/Cargo.CargoGroup.html +++ b/Documentation/Cargo.CargoGroup.html @@ -2422,10 +2422,27 @@ Therefore, this class is considered to be deprecated

+CARGO_GROUP.CargoCarrier + + + + +

self.CargoObject:Destroy()

+ +
+ + +
+
+ + CARGO_GROUP.CargoGroup + +

Then we register the new group in the database

+
diff --git a/Documentation/Core.Settings.html b/Documentation/Core.Settings.html index 0f58fae77..212db3ac1 100644 --- a/Documentation/Core.Settings.html +++ b/Documentation/Core.Settings.html @@ -3445,7 +3445,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #string SETTINGS.A2GSystem @@ -5602,7 +5602,7 @@ It is advised to use this method at the start of the mission.

- + #string SETTINGS.A2GSystem diff --git a/Documentation/Core.Spawn.html b/Documentation/Core.Spawn.html index d5a4939bb..86d2764fd 100644 --- a/Documentation/Core.Spawn.html +++ b/Documentation/Core.Spawn.html @@ -3652,24 +3652,12 @@ and any spaces before and after the resulting name are removed.

SPAWN:_TranslateRotate(SpawnIndex, SpawnRootX, SpawnRootY, SpawnX, SpawnY, SpawnAngle)

- - - -

SPAWN.communication

- -

SPAWN.hidden

- - - -

SPAWN.skill

- - @@ -4344,14 +4332,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean + SPAWN.AIOnOff - -

The AI is on by default when spawning a group.

-
@@ -4603,17 +4588,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - -SPAWN.SpawnInitAirbase - - -
@@ -4669,17 +4643,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - -SPAWN.SpawnInitFreq - - -
@@ -4746,6 +4709,9 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + +

Overwrite unit names by default with group name.

+ @@ -4757,6 +4723,9 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + +

By default, no InitLimit

+ @@ -4793,6 +4762,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

self:T2( { self.SpawnTemplatePrefix, Vec2} )

+ + + +
+
+ + #string +SPAWN.SpawnInitSkill + + +
@@ -4824,7 +4804,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #number SPAWN.SpawnMaxGroups @@ -4838,7 +4818,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #number SPAWN.SpawnMaxUnitsAlive @@ -5147,17 +5127,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - -SPAWN.communication - - -
@@ -5169,17 +5138,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - -SPAWN.skill - - -
@@ -10964,14 +10922,11 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- #boolean + SPAWN.AIOnOff - -

The AI is on by default when spawning a group.

-
@@ -11223,17 +11178,6 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- - -
-
- - -SPAWN.SpawnInitAirbase - - -
@@ -11289,17 +11233,6 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- - -
-
- - -SPAWN.SpawnInitFreq - - -
@@ -11366,6 +11299,9 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

Overwrite unit names by default with group name.

+ @@ -11377,6 +11313,9 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

By default, no InitLimit

+ @@ -11413,6 +11352,17 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

self:T2( { self.SpawnTemplatePrefix, Vec2} )

+ + + +
+
+ + #string +SPAWN.SpawnInitSkill + + +
@@ -11444,7 +11394,7 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- + #number SPAWN.SpawnMaxGroups @@ -11458,7 +11408,7 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- + #number SPAWN.SpawnMaxUnitsAlive @@ -11767,17 +11717,6 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- -
-
-
- - -SPAWN.communication - - -
@@ -11789,17 +11728,6 @@ This is needed to ensure that Re-SPAWNing only is done for landed AIR Groups.

- -
-
-
- - -SPAWN.skill - - -
diff --git a/Documentation/Core.SpawnStatic.html b/Documentation/Core.SpawnStatic.html index f0d6d72b9..fef543f9b 100644 --- a/Documentation/Core.SpawnStatic.html +++ b/Documentation/Core.SpawnStatic.html @@ -3710,7 +3710,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #table SPAWNSTATIC.TemplateStaticUnit @@ -5571,7 +5571,7 @@ Handy if you spawn from cargo statics which have resources already set.

- + #table SPAWNSTATIC.TemplateStaticUnit diff --git a/Documentation/Core.Spot.html b/Documentation/Core.Spot.html index 554594acf..a2ae16726 100644 --- a/Documentation/Core.Spot.html +++ b/Documentation/Core.Spot.html @@ -3429,6 +3429,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau +
+ +
+
+
+ + +SPOT.Target + + +
@@ -4745,6 +4756,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau +
+ +
+
+
+ + +SPOT.Target + + +
@@ -6300,6 +6322,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + + + +
+
+ + +SPOT.Target + + +
diff --git a/Documentation/Core.Zone.html b/Documentation/Core.Zone.html index 437341954..30bc03c85 100644 --- a/Documentation/Core.Zone.html +++ b/Documentation/Core.Zone.html @@ -17144,6 +17144,17 @@ When moose is loading dynamically (for moose class development), tracing is swit
+ZONE_OVAL.Angle + + + +
+ + +
+
+ + #table ZONE_OVAL.CenterVec2 @@ -17848,6 +17859,17 @@ When moose is loading dynamically (for moose class development), tracing is swit
+ZONE_OVAL.Angle + + + +
+ +
+
+
+ + #table ZONE_OVAL.CenterVec2 @@ -20019,6 +20041,17 @@ end
+ZONE_OVAL.Angle + + + +
+ +
+
+
+ + #table ZONE_OVAL.CenterVec2 @@ -21519,6 +21552,17 @@ end
+ZONE_OVAL.Angle + + + +
+ +
+
+
+ + #table ZONE_OVAL.CenterVec2 diff --git a/Documentation/Functional.Autolase.html b/Documentation/Functional.Autolase.html index b94a8d2d8..5c6a92261 100644 --- a/Documentation/Functional.Autolase.html +++ b/Documentation/Functional.Autolase.html @@ -2972,7 +2972,7 @@
- + #table AUTOLASE.CurrentLasing @@ -3049,7 +3049,7 @@
- + #table AUTOLASE.GroupsByThreat @@ -3164,6 +3164,17 @@ +
+ +
+
+
+ + #number +AUTOLASE.RoundingPrecision + + +
@@ -3178,6 +3189,39 @@

set up SRS

+
+ +
+
+
+ + #number +AUTOLASE.SRSFreq + + + +
+ +
+
+
+ + +AUTOLASE.SRSMod + + + +
+ +
+
+
+ + #string +AUTOLASE.SRSPath + + +
@@ -3195,7 +3239,7 @@
- + #table AUTOLASE.UnitsByThreat @@ -3266,6 +3310,17 @@ +
+ +
+
+
+ + #number +AUTOLASE.lasingindex + + +
@@ -3286,7 +3341,18 @@
+ #number +AUTOLASE.maxlasing + + +
+ +
+
+
+ + #number AUTOLASE.minthreatlevel @@ -3319,8 +3385,8 @@
- #boolean -AUTOLASE.smokemenu + #number +AUTOLASE.reporttimelong @@ -3330,8 +3396,19 @@
- #table -AUTOLASE.smokeoffset + #number +AUTOLASE.reporttimeshort + + + +
+ +
+
+
+ + #boolean +AUTOLASE.smokemenu @@ -3352,7 +3429,7 @@
- + #table AUTOLASE.targetsperrecce diff --git a/Documentation/Functional.Designate.html b/Documentation/Functional.Designate.html index ef2100b36..935bf12c7 100644 --- a/Documentation/Functional.Designate.html +++ b/Documentation/Functional.Designate.html @@ -3066,17 +3066,6 @@ Use the method DESIGNATE.SetMission() to -
- -
-
-
- - -DESIGNATE.LaseDuration - - -
diff --git a/Documentation/Functional.Detection.html b/Documentation/Functional.Detection.html index dc93290bf..50c7e8411 100644 --- a/Documentation/Functional.Detection.html +++ b/Documentation/Functional.Detection.html @@ -20758,7 +20758,7 @@ When moose is loading dynamically (for moose class development), tracing is swit
- #number + DETECTION_BASE.RefreshTimeInterval @@ -25512,7 +25512,7 @@ zones that reflect cloudy areas where detected units may not be so easily visual
- #number + DETECTION_BASE.RefreshTimeInterval @@ -27254,7 +27254,7 @@ zones that reflect cloudy areas where detected units may not be so easily visual
- #number + DETECTION_BASE.RefreshTimeInterval diff --git a/Documentation/Functional.Mantis.html b/Documentation/Functional.Mantis.html index 5c0299ad8..c56d75935 100644 --- a/Documentation/Functional.Mantis.html +++ b/Documentation/Functional.Mantis.html @@ -2579,12 +2579,6 @@ in the mission editor are absolute maximum ranges; in-game this is rather 50-75%

MANTIS:GetCommandCenter()

Function to get the HQ object for further use

- - - -

MANTIS.Groupset

- - @@ -5180,17 +5174,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Table of Core.Zone#ZONE Zones Consider SAM groups in this zone(s) only for this MANTIS instance, must be handed as #table of Zone objects.

-
- -
-
-
- - -MANTIS.Groupset - - -
@@ -5263,7 +5246,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #table MANTIS.SAM_Table_Long @@ -5274,7 +5257,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #table MANTIS.SAM_Table_Medium @@ -5285,7 +5268,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #table MANTIS.SAM_Table_PointDef @@ -5296,7 +5279,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #table MANTIS.SAM_Table_Short @@ -5791,6 +5774,61 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Log SAM status in dcs.log every cycle if true.

+
+ +
+
+
+ + #number +MANTIS.maxclassic + + + +
+ +
+
+
+ + #number +MANTIS.maxlongrange + + + +
+ +
+
+
+ + #number +MANTIS.maxmidrange + + + +
+ +
+
+
+ + #number +MANTIS.maxpointdefrange + + + +
+ +
+
+
+ + #number +MANTIS.maxshortrange + + +
@@ -5860,9 +5898,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau - -

switch alarm state RED

-
@@ -5885,6 +5920,9 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + +

self.SAMCheckRanges = {}

+
@@ -10700,17 +10738,6 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`

Table of Core.Zone#ZONE Zones Consider SAM groups in this zone(s) only for this MANTIS instance, must be handed as #table of Zone objects.

-
- -
-
-
- - -MANTIS.Groupset - - -
@@ -10783,7 +10810,7 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`
- + #table MANTIS.SAM_Table_Long @@ -10794,7 +10821,7 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`
- + #table MANTIS.SAM_Table_Medium @@ -10805,7 +10832,7 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`
- + #table MANTIS.SAM_Table_PointDef @@ -10816,7 +10843,7 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`
- + #table MANTIS.SAM_Table_Short @@ -11311,6 +11338,61 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`

Log SAM status in dcs.log every cycle if true.

+
+ +
+
+
+ + #number +MANTIS.maxclassic + + + +
+ +
+
+
+ + #number +MANTIS.maxlongrange + + + +
+ +
+
+
+ + #number +MANTIS.maxmidrange + + + +
+ +
+
+
+ + #number +MANTIS.maxpointdefrange + + + +
+ +
+
+
+ + #number +MANTIS.maxshortrange + + +
@@ -11380,9 +11462,6 @@ E.g. `mymantis:SetAdvancedMode(true, 90)` - -

switch alarm state RED

-
@@ -11405,6 +11484,9 @@ E.g. `mymantis:SetAdvancedMode(true, 90)` + +

self.SAMCheckRanges = {}

+
diff --git a/Documentation/Functional.Movement.html b/Documentation/Functional.Movement.html index 1bc5fbeba..9947d2102 100644 --- a/Documentation/Functional.Movement.html +++ b/Documentation/Functional.Movement.html @@ -2849,20 +2849,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Field(s)

-
-
- - #number -MOVEMENT.AliveUnits - - - - -

Contains the counter how many units are currently alive.

- -
- -
@@ -3093,20 +3079,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Field(s)

-
-
- - #number -MOVEMENT.AliveUnits - - - - -

Contains the counter how many units are currently alive.

- -
- -
diff --git a/Documentation/Functional.RAT.html b/Documentation/Functional.RAT.html index e10c14d7e..767b54bef 100644 --- a/Documentation/Functional.RAT.html +++ b/Documentation/Functional.RAT.html @@ -5224,24 +5224,12 @@ and any spaces before and after the resulting name are removed.

RAT:_TranslateRotate(SpawnIndex, SpawnRootX, SpawnRootY, SpawnX, SpawnY, SpawnAngle)

- - - -

RAT.communication

- -

RAT.hidden

- - - -

RAT.skill

- - diff --git a/Documentation/Functional.Scoring.html b/Documentation/Functional.Scoring.html index 9e18a0d1e..5f5b54752 100644 --- a/Documentation/Functional.Scoring.html +++ b/Documentation/Functional.Scoring.html @@ -3559,17 +3559,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-SCORING.AutoSave - - - -
- -
-
-
- - SCORING.AutoSavePath @@ -3814,7 +3803,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #boolean SCORING.penaltyoncoalitionchange @@ -3825,7 +3814,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- + #boolean SCORING.penaltyonfratricide @@ -7027,17 +7016,6 @@ The scale magnifies the scores given to the players.

-SCORING.AutoSave - - - -
- -
-
-
- - SCORING.AutoSavePath @@ -7282,7 +7260,7 @@ The scale magnifies the scores given to the players.

- + #boolean SCORING.penaltyoncoalitionchange @@ -7293,7 +7271,7 @@ The scale magnifies the scores given to the players.

- + #boolean SCORING.penaltyonfratricide diff --git a/Documentation/Functional.ZoneCaptureCoalition.html b/Documentation/Functional.ZoneCaptureCoalition.html index 27182fd46..21999e2a5 100644 --- a/Documentation/Functional.ZoneCaptureCoalition.html +++ b/Documentation/Functional.ZoneCaptureCoalition.html @@ -2778,6 +2778,20 @@ We start the monitoring after 5 seconds, and will repeat every 30 seconds a chec
+ZONE_CAPTURE_COALITION.HitTimeLast + + + + +

Update last hit time.

+ +
+ +
+
+
+ + ZONE_CAPTURE_COALITION.HitsOn diff --git a/Documentation/Ops.Airboss.html b/Documentation/Ops.Airboss.html index 8b4cc8eae..ef4a37263 100644 --- a/Documentation/Ops.Airboss.html +++ b/Documentation/Ops.Airboss.html @@ -10485,17 +10485,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Radio queue of LSO.

-
- -
-
-
- - -AIRBOSS.RQLid - - -
@@ -10507,17 +10496,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Radio queue of marshal.

-
- -
-
-
- - -AIRBOSS.RQMid - - -
@@ -31154,17 +31132,6 @@ If removed flight is the section lead, we try to find a new leader.

Radio queue of LSO.

-
- -
-
-
- - -AIRBOSS.RQLid - - -
@@ -31176,17 +31143,6 @@ If removed flight is the section lead, we try to find a new leader.

Radio queue of marshal.

-
- -
-
-
- - -AIRBOSS.RQMid - - -
@@ -34267,17 +34223,6 @@ If removed flight is the section lead, we try to find a new leader.

Radio queue of LSO.

-
- -
-
-
- - -AIRBOSS.RQLid - - -
@@ -34289,17 +34234,6 @@ If removed flight is the section lead, we try to find a new leader.

Radio queue of marshal.

-
- -
-
-
- - -AIRBOSS.RQMid - - -
@@ -42561,7 +42495,7 @@ When moose is loading dynamically (for moose class development), tracing is swit -

VNAO Edit - Added

+

VNAO Edit - Added

@@ -42589,7 +42523,7 @@ When moose is loading dynamically (for moose class development), tracing is swit -

VNAO Edit - Added

+

VNAO Edit - Added

@@ -42603,7 +42537,7 @@ When moose is loading dynamically (for moose class development), tracing is swit -

VNAO Edit - Added

+

VNAO Edit - Added

@@ -42715,9 +42649,6 @@ When moose is loading dynamically (for moose class development), tracing is swit - -

Set case to that of lead.

-
@@ -42813,6 +42744,17 @@ When moose is loading dynamically (for moose class development), tracing is swit

Data table at each position in the groove. Elements are of type AIRBOSS.GrooveData.

+
+ +
+
+
+ + #boolean +AIRBOSS.PlayerData.holding + + +
@@ -42948,9 +42890,6 @@ When moose is loading dynamically (for moose class development), tracing is swit - -

Set section lead of player flight.

-
@@ -42973,6 +42912,9 @@ When moose is loading dynamically (for moose class development), tracing is swit + +

Set Stable Hover

+
@@ -43006,9 +42948,6 @@ When moose is loading dynamically (for moose class development), tracing is swit - -

Set time stamp.

-
@@ -43173,7 +43112,7 @@ When moose is loading dynamically (for moose class development), tracing is swit -

VNAO Edit - Added

+

VNAO Edit - Added

@@ -43251,17 +43190,6 @@ When moose is loading dynamically (for moose class development), tracing is swit

Band modulation.

-
- -
-
-
- - -AIRBOSS.Radio.voice - - -
diff --git a/Documentation/Ops.ArmyGroup.html b/Documentation/Ops.ArmyGroup.html index 50faf731a..087029e6e 100644 --- a/Documentation/Ops.ArmyGroup.html +++ b/Documentation/Ops.ArmyGroup.html @@ -3094,6 +3094,12 @@

ARMYGROUP:DestroyUnit(UnitName, Delay)

Destroy a unit of the group.

+ + + +

ARMYGROUP.EPLRS

+ + diff --git a/Documentation/Ops.Auftrag.html b/Documentation/Ops.Auftrag.html index 0f6c47b0e..04a028097 100644 --- a/Documentation/Ops.Auftrag.html +++ b/Documentation/Ops.Auftrag.html @@ -8057,17 +8057,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Mission Ingress waypoint coordinate.

-
- -
-
-
- - -AUFTRAG.missionIngressCoordAlt - - -
@@ -23804,17 +23793,6 @@ will always return.

Mission Ingress waypoint coordinate.

-
- -
-
-
- - -AUFTRAG.missionIngressCoordAlt - - -
@@ -27196,17 +27174,6 @@ will always return.

Mission Ingress waypoint coordinate.

- - - -
-
- - -AUFTRAG.missionIngressCoordAlt - - -
diff --git a/Documentation/Ops.CSAR.html b/Documentation/Ops.CSAR.html index 73587b45d..8034066f9 100644 --- a/Documentation/Ops.CSAR.html +++ b/Documentation/Ops.CSAR.html @@ -5127,14 +5127,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CSAR.csarUnits - -

table of CSAR unit names

-
@@ -5155,14 +5152,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CSAR.downedPilots - -

Replacement woundedGroups

-
@@ -5502,20 +5496,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau - -
-
- - #number -CSAR.rescuedpilots - - - - -

counter for saved pilots

- -
-
@@ -5541,20 +5521,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-
-
-
- - #number -CSAR.rescues - - - - -

counter for successful rescue landings at FARP/AFB/MASH

- -
-
@@ -11506,14 +11472,11 @@ callsigns from playername or group name.

- #table + CSAR.csarUnits - -

table of CSAR unit names

-
@@ -11534,14 +11497,11 @@ callsigns from playername or group name.

- #table + CSAR.downedPilots - -

Replacement woundedGroups

-
@@ -11881,20 +11841,6 @@ callsigns from playername or group name.

-
-
-
- - #number -CSAR.rescuedpilots - - - - -

counter for saved pilots

- -
-
@@ -11920,20 +11866,6 @@ callsigns from playername or group name.

-
-
-
- - #number -CSAR.rescues - - - - -

counter for successful rescue landings at FARP/AFB/MASH

- -
-
@@ -14089,14 +14021,11 @@ callsigns from playername or group name.

- #table + CSAR.csarUnits - -

table of CSAR unit names

-
@@ -14117,14 +14046,11 @@ callsigns from playername or group name.

- #table + CSAR.downedPilots - -

Replacement woundedGroups

-
@@ -14464,20 +14390,6 @@ callsigns from playername or group name.

-
-
-
- - #number -CSAR.rescuedpilots - - - - -

counter for saved pilots

- -
-
@@ -14503,20 +14415,6 @@ callsigns from playername or group name.

-
-
-
- - #number -CSAR.rescues - - - - -

counter for successful rescue landings at FARP/AFB/MASH

- -
-
diff --git a/Documentation/Ops.CTLD.html b/Documentation/Ops.CTLD.html index 50235b901..434366b84 100644 --- a/Documentation/Ops.CTLD.html +++ b/Documentation/Ops.CTLD.html @@ -9344,6 +9344,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Name of the class.

+
+ +
+
+
+ + #number +CTLD.CrateCounter + + +
@@ -9364,7 +9375,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.CtldUnits @@ -9386,7 +9397,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.DroppedTroops @@ -9411,14 +9422,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.EngineersInField - -

holds #CTLD_ENGINEERING objects

-
@@ -9503,7 +9511,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.FreeFMFrequencies @@ -9514,7 +9522,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.FreeUHFFrequencies @@ -9525,14 +9533,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table + CTLD.FreeVHFFrequencies - -

Beacons

-
@@ -9619,11 +9624,14 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #string + CTLD.RadioPath + +

Folderpath.

+
@@ -9915,17 +9923,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

#1570

-
- -
-
-
- - #table -CTLD.droppedBeacons - - -
@@ -10200,17 +10197,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

enfore engineer build only?

-
- -
-
-
- - #boolean -CTLD.onestepmenu - - -
@@ -24018,6 +24004,17 @@ However, if you create a new folder inside the miz file, which contains the soun

Name of the class.

+
+ +
+
+
+ + #number +CTLD.CrateCounter + + +
@@ -24038,7 +24035,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.CtldUnits @@ -24060,7 +24057,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.DroppedTroops @@ -24085,14 +24082,11 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.EngineersInField - -

holds #CTLD_ENGINEERING objects

-
@@ -24177,7 +24171,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeFMFrequencies @@ -24188,7 +24182,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeUHFFrequencies @@ -24199,14 +24193,11 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeVHFFrequencies - -

Beacons

-
@@ -24293,11 +24284,14 @@ However, if you create a new folder inside the miz file, which contains the soun
- #string + CTLD.RadioPath + +

Folderpath.

+
@@ -24589,17 +24583,6 @@ However, if you create a new folder inside the miz file, which contains the soun

#1570

-
- -
-
-
- - #table -CTLD.droppedBeacons - - -
@@ -24874,17 +24857,6 @@ However, if you create a new folder inside the miz file, which contains the soun

enfore engineer build only?

-
- -
-
-
- - #boolean -CTLD.onestepmenu - - -
@@ -26673,6 +26645,17 @@ However, if you create a new folder inside the miz file, which contains the soun

Name of the class.

+
+ +
+
+
+ + #number +CTLD.CrateCounter + + +
@@ -26693,7 +26676,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.CtldUnits @@ -26715,7 +26698,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.DroppedTroops @@ -26740,14 +26723,11 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.EngineersInField - -

holds #CTLD_ENGINEERING objects

-
@@ -26832,7 +26812,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeFMFrequencies @@ -26843,7 +26823,7 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeUHFFrequencies @@ -26854,14 +26834,11 @@ However, if you create a new folder inside the miz file, which contains the soun
- #table + CTLD.FreeVHFFrequencies - -

Beacons

-
@@ -26948,11 +26925,14 @@ However, if you create a new folder inside the miz file, which contains the soun
- #string + CTLD.RadioPath + +

Folderpath.

+
@@ -27244,17 +27224,6 @@ However, if you create a new folder inside the miz file, which contains the soun

#1570

-
- -
-
-
- - #table -CTLD.droppedBeacons - - -
@@ -27529,17 +27498,6 @@ However, if you create a new folder inside the miz file, which contains the soun

enfore engineer build only?

-
- -
-
-
- - #boolean -CTLD.onestepmenu - - -
@@ -32323,17 +32281,6 @@ When moose is loading dynamically (for moose class development), tracing is swit

Can transport crate.

-
- -
-
-
- - #number -CTLD.UnitTypeCapabilities.length - - -
diff --git a/Documentation/Ops.FlightGroup.html b/Documentation/Ops.FlightGroup.html index facc9e437..66dfd9682 100644 --- a/Documentation/Ops.FlightGroup.html +++ b/Documentation/Ops.FlightGroup.html @@ -3954,6 +3954,12 @@

FLIGHTGROUP:DestroyUnit(UnitName, Delay)

Destroy a unit of the group.

+ + + +

FLIGHTGROUP.EPLRS

+ + @@ -8520,6 +8526,9 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + +

Set the destination base.

+
@@ -8712,11 +8721,14 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- -FLIGHTGROUP.isLandingAtAirbase + #boolean +FLIGHTGROUP.isLateActivated + +

No late activation.

+
@@ -8741,6 +8753,20 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
+
+
+
+ + #boolean +FLIGHTGROUP.isUncontrolled + + + + +

Spawn in uncontrolled state.

+ +
+
@@ -19289,6 +19315,9 @@ Here we only check if stuck whilst taxiing.

+ +

Set the destination base.

+
@@ -19481,11 +19510,14 @@ Here we only check if stuck whilst taxiing.

- -FLIGHTGROUP.isLandingAtAirbase + #boolean +FLIGHTGROUP.isLateActivated + +

No late activation.

+
@@ -19510,6 +19542,20 @@ Here we only check if stuck whilst taxiing.

+
+
+
+ + #boolean +FLIGHTGROUP.isUncontrolled + + + + +

Spawn in uncontrolled state.

+ +
+
@@ -40095,6 +40141,9 @@ Optionally, you can calculate the current max weight possible, which accounts fo + +

Set the destination base.

+
@@ -40287,11 +40336,14 @@ Optionally, you can calculate the current max weight possible, which accounts fo
- -FLIGHTGROUP.isLandingAtAirbase + #boolean +FLIGHTGROUP.isLateActivated + +

No late activation.

+
@@ -40316,6 +40368,20 @@ Optionally, you can calculate the current max weight possible, which accounts fo + +
+
+ + #boolean +FLIGHTGROUP.isUncontrolled + + + + +

Spawn in uncontrolled state.

+ +
+
@@ -42264,6 +42330,9 @@ Optionally, you can calculate the current max weight possible, which accounts fo + +

Set the destination base.

+
@@ -42456,11 +42525,14 @@ Optionally, you can calculate the current max weight possible, which accounts fo
- -FLIGHTGROUP.isLandingAtAirbase + #boolean +FLIGHTGROUP.isLateActivated + +

No late activation.

+
@@ -42485,6 +42557,20 @@ Optionally, you can calculate the current max weight possible, which accounts fo + +
+
+ + #boolean +FLIGHTGROUP.isUncontrolled + + + + +

Spawn in uncontrolled state.

+ +
+
diff --git a/Documentation/Ops.Intel.html b/Documentation/Ops.Intel.html index b7fbe89f5..69f794fb3 100644 --- a/Documentation/Ops.Intel.html +++ b/Documentation/Ops.Intel.html @@ -5476,6 +5476,72 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Types of units we can detect accousticly. Defaults to {Unit.Category.HELICOPTER}

+
+ +
+
+
+ + #boolean +INTEL.DetectDLINK + + + +
+ +
+
+
+ + #boolean +INTEL.DetectIRST + + + +
+ +
+
+
+ + #boolean +INTEL.DetectOptical + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRWR + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRadar + + + +
+ +
+
+
+ + #boolean +INTEL.DetectVisual + + +
@@ -10766,6 +10832,72 @@ Note that reject zones overrule accept zones, i.e. if a unit is inside an accept

Types of units we can detect accousticly. Defaults to {Unit.Category.HELICOPTER}

+ + + +
+
+ + #boolean +INTEL.DetectDLINK + + + +
+ +
+
+
+ + #boolean +INTEL.DetectIRST + + + +
+ +
+
+
+ + #boolean +INTEL.DetectOptical + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRWR + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRadar + + + +
+ +
+
+
+ + #boolean +INTEL.DetectVisual + + +
@@ -12585,6 +12717,72 @@ Note that reject zones overrule accept zones, i.e. if a unit is inside an accept

Types of units we can detect accousticly. Defaults to {Unit.Category.HELICOPTER}

+ + + +
+
+ + #boolean +INTEL.DetectDLINK + + + +
+ +
+
+
+ + #boolean +INTEL.DetectIRST + + + +
+ +
+
+
+ + #boolean +INTEL.DetectOptical + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRWR + + + +
+ +
+
+
+ + #boolean +INTEL.DetectRadar + + + +
+ +
+
+
+ + #boolean +INTEL.DetectVisual + + +
diff --git a/Documentation/Ops.NavyGroup.html b/Documentation/Ops.NavyGroup.html index 4ac1da9ef..0ea267809 100644 --- a/Documentation/Ops.NavyGroup.html +++ b/Documentation/Ops.NavyGroup.html @@ -3123,6 +3123,12 @@

NAVYGROUP:DestroyUnit(UnitName, Delay)

Destroy a unit of the group.

+ + + +

NAVYGROUP.EPLRS

+ + diff --git a/Documentation/Ops.OpsGroup.html b/Documentation/Ops.OpsGroup.html index 711f10c29..647f0cf98 100644 --- a/Documentation/Ops.OpsGroup.html +++ b/Documentation/Ops.OpsGroup.html @@ -2352,6 +2352,12 @@

OPSGROUP:DestroyUnit(UnitName, Delay)

Destroy a unit of the group.

+ + + +

OPSGROUP.EPLRS

+ + @@ -7970,6 +7976,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Name of the class.

+ + + +
+
+ + +OPSGROUP.EPLRS + + +
@@ -29704,6 +29721,17 @@ Optionally, you can calculate the current max weight possible, which accounts fo

Name of the class.

+ + + +
+
+ + +OPSGROUP.EPLRS + + +
@@ -32801,6 +32829,17 @@ Optionally, you can calculate the current max weight possible, which accounts fo

Name of the class.

+ + + +
+
+ + +OPSGROUP.EPLRS + + +
diff --git a/Documentation/Ops.PlayerTask.html b/Documentation/Ops.PlayerTask.html index 367a4e371..78bc613ca 100644 --- a/Documentation/Ops.PlayerTask.html +++ b/Documentation/Ops.PlayerTask.html @@ -17117,7 +17117,7 @@ When moose is loading dynamically (for moose class development), tracing is swit
- + #number PLAYERTASKCONTROLLER.lasttaskcount @@ -17188,6 +17188,17 @@ When moose is loading dynamically (for moose class development), tracing is swit +
+ +
+
+
+ + #number +PLAYERTASKCONTROLLER.repeattimes + + +
@@ -24558,7 +24569,7 @@ If you don't want SEAD tasks generated, use as follows where "mycontroller" is y
- + #number PLAYERTASKCONTROLLER.lasttaskcount @@ -24629,6 +24640,17 @@ If you don't want SEAD tasks generated, use as follows where "mycontroller" is y +
+ +
+
+
+ + #number +PLAYERTASKCONTROLLER.repeattimes + + +
@@ -26999,7 +27021,7 @@ If you don't want SEAD tasks generated, use as follows where "mycontroller" is y
- + #number PLAYERTASKCONTROLLER.lasttaskcount @@ -27070,6 +27092,17 @@ If you don't want SEAD tasks generated, use as follows where "mycontroller" is y +
+ +
+
+
+ + #number +PLAYERTASKCONTROLLER.repeattimes + + +
diff --git a/Documentation/Tasking.Task_A2A_Dispatcher.html b/Documentation/Tasking.Task_A2A_Dispatcher.html index 1026852e0..7f8eaa42e 100644 --- a/Documentation/Tasking.Task_A2A_Dispatcher.html +++ b/Documentation/Tasking.Task_A2A_Dispatcher.html @@ -2628,7 +2628,7 @@ Therefore, this class is considered to be deprecated

- + #boolean TASK_A2A_DISPATCHER.FlashNewTask @@ -3353,7 +3353,7 @@ If too large, any airborne cap may not be able to reach the detected target area
- + #boolean TASK_A2A_DISPATCHER.FlashNewTask diff --git a/Documentation/Tasking.Task_A2G_Dispatcher.html b/Documentation/Tasking.Task_A2G_Dispatcher.html index d5b96e273..e27d7bdd1 100644 --- a/Documentation/Tasking.Task_A2G_Dispatcher.html +++ b/Documentation/Tasking.Task_A2G_Dispatcher.html @@ -2898,14 +2898,11 @@ Therefore, this class is considered to be deprecated

- #boolean + TASK_A2G_DISPATCHER.FlashNewTask - -

set to false to suppress flash messages

-
@@ -3478,14 +3475,11 @@ Therefore, this class is considered to be deprecated

- #boolean + TASK_A2G_DISPATCHER.FlashNewTask - -

set to false to suppress flash messages

-
diff --git a/Documentation/Tasking.Task_CARGO.html b/Documentation/Tasking.Task_CARGO.html index a98572512..164ad7f30 100644 --- a/Documentation/Tasking.Task_CARGO.html +++ b/Documentation/Tasking.Task_CARGO.html @@ -2913,7 +2913,7 @@ based on the tasking capabilities defined in
- + #number TASK_CARGO.CargoLimit diff --git a/Documentation/Tasking.Task_Cargo_Dispatcher.html b/Documentation/Tasking.Task_Cargo_Dispatcher.html index 2e30c3084..f8b0ed802 100644 --- a/Documentation/Tasking.Task_Cargo_Dispatcher.html +++ b/Documentation/Tasking.Task_Cargo_Dispatcher.html @@ -3774,18 +3774,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #number -TASK_CARGO_DISPATCHER.CountCSAR - - - -
- -
-
-
- - + #table TASK_CARGO_DISPATCHER.DefaultDeployZones @@ -4891,18 +4880,7 @@ This method can only be used once!

- #number -TASK_CARGO_DISPATCHER.CountCSAR - - - -
- -
-
-
- - + #table TASK_CARGO_DISPATCHER.DefaultDeployZones @@ -5760,18 +5738,7 @@ This method can only be used once!

- #number -TASK_CARGO_DISPATCHER.CountCSAR - - - -
- -
-
-
- - + #table TASK_CARGO_DISPATCHER.DefaultDeployZones @@ -7260,18 +7227,7 @@ This method can only be used once!

- #number -TASK_CARGO_DISPATCHER.CountCSAR - - - -
- -
-
-
- - + #table TASK_CARGO_DISPATCHER.DefaultDeployZones diff --git a/Documentation/Utilities.FiFo.html b/Documentation/Utilities.FiFo.html index fa2229e05..448759492 100644 --- a/Documentation/Utilities.FiFo.html +++ b/Documentation/Utilities.FiFo.html @@ -3913,6 +3913,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Stack by pointer.

+
+ +
+
+
+ + #number +FIFO.uniquecounter + + +
@@ -4762,6 +4773,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau

Stack by pointer.

+
+ +
+
+
+ + #number +FIFO.uniquecounter + + +
@@ -8679,6 +8701,17 @@ When moose is loading dynamically (for moose class development), tracing is swit +
+ +
+
+
+ + #number +LIFO.uniquecounter + + +
@@ -9528,6 +9561,17 @@ When moose is loading dynamically (for moose class development), tracing is swit +
+ +
+
+
+ + #number +LIFO.uniquecounter + + +
diff --git a/Documentation/Utilities.Utils.html b/Documentation/Utilities.Utils.html index b15cc09ca..4abb1f2e9 100644 --- a/Documentation/Utilities.Utils.html +++ b/Documentation/Utilities.Utils.html @@ -2621,6 +2621,12 @@

UTILS.BeaufortScale(speed)

Beaufort scale: returns Beaufort number and wind description as a function of wind speed in m/s.

+ + + +

UTILS.CalculateInterceptBearing(A1, V1, A2, V2_speed)

+ +

Calculated optimal intercepting course (Bearing)

@@ -3593,6 +3599,18 @@ use negative idp for rounding ahead of decimal place, positive for rounding afte

UTILS.Vec2toVec3(vec, y)

Converts a Vec2 to a Vec3.

+ + + +

UTILS.Vec3Length(v)

+ +

Calculate the lenght of a 3D vector

+ + + +

UTILS.Vec3Substract(a, b)

+ +

Calculate the difference between two 3D vectors by substracting the x,y,z components from each other.

@@ -3641,6 +3659,12 @@ use negative idp for rounding ahead of decimal place, positive for rounding afte

UTILS.VecNorm(a)

Calculate the euclidean norm (length) of a 3D vector.

+ + + +

UTILS.VecScale(v, s)

+ +

Scale a 3D vectors by multiplication with s.

@@ -4673,6 +4697,89 @@ use negative idp for rounding ahead of decimal place, positive for rounding afte
+
+
+ +
+ +
+

UTILS.CalculateInterceptBearing(A1, V1, A2, V2_speed)

+
+ +

Calculated optimal intercepting course (Bearing)

+ +
+
+

Defined in:

+
+

UTILS

+
+

Parameters:

+
+
+

+ DCS#Vec3 + A1 +

+
+
+ +

Position of flight one

+ +
+
+
+
+

+ DCS#Vec3 + V1 +

+
+
+ +

VelocityVector of flight one

+ +
+
+
+
+

+ DCS#Vec3 + A2 +

+
+
+ +

Position of flight two

+ +
+
+
+
+

+ #number + V2_speed +

+
+
+ +

Speed of A2 in m/s

+ +
+
+

Return value:

+
+
+

#number:

+
+
+ +

Bearing Bearing course for A2 to take for an intercept of A1 or nil if aspect is hot/cold.

+ +
+
+
+
@@ -14335,6 +14442,107 @@ static, shape_name is optional. Also, livery_id is optional, but is applied to t
+ + + +
+ +
+

UTILS.Vec3Length(v)

+
+ +

Calculate the lenght of a 3D vector

+ +
+
+

Defined in:

+
+

UTILS

+
+

Parameter:

+
+
+

+ DCS#Vec3 + v +

+
+
+ +

A Vector in 3D with x, y, z components.

+ +
+
+

Return value:

+
+
+

#number:

+
+
+ +

length

+ +
+
+
+ +
+
+ +
+ +
+

UTILS.Vec3Substract(a, b)

+
+ +

Calculate the difference between two 3D vectors by substracting the x,y,z components from each other.

+ +
+
+

Defined in:

+
+

UTILS

+
+

Parameters:

+
+
+

+ DCS#Vec3 + a +

+
+
+ +

Vector in 3D with x, y, z components.

+ +
+
+
+
+

+ DCS#Vec3 + b +

+
+
+ +

Vector in 3D with x, y, z components.

+ +
+
+

Return value:

+
+
+

DCS#Vec3:

+
+
+ +

Vector in 3D.

+ +
+
+
+
@@ -14771,6 +14979,63 @@ static, shape_name is optional. Also, livery_id is optional, but is applied to t + + + +
+ +
+

UTILS.VecScale(v, s)

+
+ +

Scale a 3D vectors by multiplication with s.

+ +
+
+

Defined in:

+
+

UTILS

+
+

Parameters:

+
+
+

+ DCS#Vec3 + v +

+
+
+ +

A Vector in 3D with x, y, z components.

+ +
+
+
+
+

+ #number + s +

+
+
+ +

Scale

+ +
+
+

Return value:

+
+
+

DCS#Vec3:

+
+
+ +

Vec3

+ +
+
+
+
diff --git a/Documentation/Wrapper.Client.html b/Documentation/Wrapper.Client.html index 970a40380..a09712bfc 100644 --- a/Documentation/Wrapper.Client.html +++ b/Documentation/Wrapper.Client.html @@ -2604,7 +2604,7 @@ If the DCS Unit object does not exist or is nil, the CLIENT methods will return

CLIENT:GetFuelMassMax()

-

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with ext.

+

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with external tanks) in kgs.

@@ -7986,10 +7986,7 @@ Animation arguments can be figured out by opening the respective 3d model in the

CLIENT:GetFuelMassMax()

-

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with ext.

- - -

tanks) in kgs.

+

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with external tanks) in kgs.

diff --git a/Documentation/Wrapper.Group.html b/Documentation/Wrapper.Group.html index 227a439ed..f68fec877 100644 --- a/Documentation/Wrapper.Group.html +++ b/Documentation/Wrapper.Group.html @@ -6211,18 +6211,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone @@ -11406,18 +11395,7 @@ These settings can be provided by calling the relevant Init...() methods of the
-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone @@ -25135,18 +25113,7 @@ mygroup:WayPointExecute()
-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone @@ -29406,18 +29373,7 @@ Coordinates are dependent on the position of the maps origin.

-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone @@ -30198,18 +30154,7 @@ If the Identifiable is alive, true is returned.

-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone @@ -30501,18 +30446,7 @@ If the Identifiable is alive, true is returned.

-GROUP.InitRespawnRandomizePositionInner - - - -
- -
-
-
- - -GROUP.InitRespawnRandomizePositionOuter +GROUP.InitRespawnRandomizePositionZone diff --git a/Documentation/Wrapper.Marker.html b/Documentation/Wrapper.Marker.html index 26d10768d..348618ddc 100644 --- a/Documentation/Wrapper.Marker.html +++ b/Documentation/Wrapper.Marker.html @@ -3691,28 +3691,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - #boolean -MARKER.tocoalition - - - -
- -
-
-
- - #boolean -MARKER.togroup - - -
@@ -5830,28 +5808,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - #boolean -MARKER.tocoalition - - - -
- -
-
-
- - #boolean -MARKER.togroup - - -
@@ -7440,28 +7396,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau -
- -
-
-
- - #boolean -MARKER.tocoalition - - - -
- -
-
-
- - #boolean -MARKER.togroup - - -
diff --git a/Documentation/Wrapper.Unit.html b/Documentation/Wrapper.Unit.html index a244dcea1..5bd12ec96 100644 --- a/Documentation/Wrapper.Unit.html +++ b/Documentation/Wrapper.Unit.html @@ -2374,7 +2374,7 @@ If you want to obtain the complete 3D position including orient

UNIT:GetFuelMassMax()

-

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with ext.

+

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with external tanks) in kgs.

@@ -6389,10 +6389,7 @@ Animation arguments can be figured out by opening the respective 3d model in the

UNIT:GetFuelMassMax()

-

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with ext.

- - -

tanks) in kgs.

+

Get the max kgs of fuel this unit can hold in its internal tank(s) and overall (with external tanks) in kgs.