Merge branch 'develop' into FF/Fox2

Moose Development/Moose/Core/RadioQueue.lua

@@ -351,13 +351,21 @@ function RADIOQUEUE:Broadcast(transmission)
       self.senderinit=true
     end
     
+    -- Set subtitle only if duration>0 sec.
+    local subtitle=nil
+    local duration=nil
+    if transmission.subtitle and transmission.subduration and transmission.subduration>0 then
+      subtitle=transmission.subtitle
+      duration=transmission.subduration
+    end
+    
     -- Command to tranmit the call.
     local commandTransmit={
       id = "TransmitMessage",
       params = {
         file=filename,
-        duration=transmission.subduration,
+        duration=duration,
-        subtitle=transmission.subtitle or "",
+        subtitle=subtitle,
         loop=false,
       }}    
     

Moose Development/Moose/Functional/Warehouse.lua

@@ -283,6 +283,13 @@
 --
 -- Assets of the warehouse can be requested by other MOOSE warehouses. A request will first be scrutinized to check if can be fulfilled at all. If the request is valid, it is
 -- put into the warehouse queue and processed as soon as possible.
+
+-- Requested assets spawn in various "Rule of Engagement Rules" (ROE) and Alerts modes. If your assets will cross into dangerous areas, be sure to change these states. You can do this in @{#WAREHOUSE:OnAfterAssetSpawned}(*From, *Event, *To, *group, *asset, *request)) function.
+--
+-- Initial Spawn states is as follows:
+--    GROUND: ROE, "Return Fire" Alarm, "Green"
+--    AIR: 	ROE, "Return Fire" Reaction to Threat, "Passive Defense"
+--    NAVAL	ROE, "Return Fire" Alarm,"N/A"
 --
 -- A request can be added by the @{#WAREHOUSE.AddRequest}(*warehouse*, *AssetDescriptor*, *AssetDescriptorValue*, *nAsset*, *TransportType*, *nTransport*, *Prio*, *Assignment*) function.
 -- The parameters are

Moose Development/Moose/Ops/ATIS.lua

@@ -130,6 +130,7 @@
 -- **Note** that you should use a different relay unit for each ATIS!
 --
 -- By default, subtitles are displayed for 10 seconds. This can be changed using @{#ATIS.SetSubtitleDuration}(*duration*) with *duration* being the duration in seconds.
+-- Setting a *duration* of 0 will completely disable all subtitles.
 --
 -- ## Active Runway
 --
@@ -354,10 +355,10 @@ ATIS.Alphabet = {
 
 --- Runway correction for converting true to magnetic heading.
 -- @type ATIS.RunwayM2T
--- @field #number Caucasus 0� (East).
+-- @field #number Caucasus 0° (East).
--- @field #number Nevada +12� (East).
+-- @field #number Nevada +12° (East).
--- @field #number Normandy -10� (West).
+-- @field #number Normandy -10° (West).
--- @field #number PersianGulf +2� (East).
+-- @field #number PersianGulf +2° (East).
 ATIS.RunwayM2T={
   Caucasus=0,
   Nevada=12,
@@ -523,7 +524,7 @@ _ATIS={}
 
 --- ATIS class version.
 -- @field #string version
-ATIS.version="0.6.3"
+ATIS.version="0.6.4"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- TODO list
@@ -709,9 +710,9 @@ function ATIS:SetMapMarks(switch)
   return self
 end
 
---- Set magnetic runway headings as depicted on the runway, *e.g.* "13" for 130� or "25L" for the left runway with magnetic heading 250�.
+--- Set magnetic runway headings as depicted on the runway, *e.g.* "13" for 130° or "25L" for the left runway with magnetic heading 250°.
 -- @param #ATIS self
--- @param #table headings Magnetic headings. Inverse (-180�) headings are added automatically. You only need to specify one heading per runway direction. "L"eft and "R" right can also be appended.
+-- @param #table headings Magnetic headings. Inverse (-180°) headings are added automatically. You only need to specify one heading per runway direction. "L"eft and "R" right can also be appended.
 -- @return #ATIS self
 function ATIS:SetRunwayHeadingsMagnetic(headings)
 
@@ -826,12 +827,12 @@ end
 --
 -- To get *true* from *magnetic* heading one has to add easterly or substract westerly variation, e.g
 --
--- A magnetic heading of 180� corresponds to a true heading of
+-- A magnetic heading of 180° corresponds to a true heading of
 --
---   * 186� on the Caucaus map
+--   * 186° on the Caucaus map
---   * 192� on the Nevada map
+--   * 192° on the Nevada map
---   * 170� on the Normany map
+--   * 170° on the Normany map
---   * 182� on the Persian Gulf map
+--   * 182° on the Persian Gulf map
 --
 -- Likewise, to convert *magnetic* into *true* heading, one has to substract easterly and add westerly variation.
 --
@@ -1085,7 +1086,7 @@ function ATIS:onafterBroadcast(From, Event, To)
     local g= 9.80665   --[m/s^2]
     local M= 0.0289644 --[kg/mol]
     local T0=coord:GetTemperature(0)+273.15 --[K] Temp at sea level.
-    local TS=288.15   -- Standard Temperature assumed by Altimeter is 15�C 
+    local TS=288.15   -- Standard Temperature assumed by Altimeter is 15°C
     local q=qnh*100
 
     -- Calculate Pressure.
@@ -1197,10 +1198,10 @@ function ATIS:onafterBroadcast(From, Event, To)
   --- Temperature ---
   -------------------
 
-  -- Temperature in �C (or �F).
+  -- Temperature in °C (or °F).
   local temperature=coord:GetTemperature(height+5)
 
-  -- Convert to �F.
+  -- Convert to °F.
   if self.TDegF then
     temperature=UTILS.CelciusToFarenheit(temperature)
   end
@@ -1537,6 +1538,7 @@ function ATIS:onafterBroadcast(From, Event, To)
   -- Runway length.
   if self.rwylength then
 
+    local runact=self.airbase:GetActiveRunway(self.runwaym2t)
     local length=runact.length
     if not self.metric then
       length=UTILS.MetersToFeet(length)
@@ -1796,7 +1798,7 @@ end
 --- Get runway from user supplied magnetic heading.
 -- @param #ATIS self
 -- @param #number windfrom Wind direction (from) in degrees.
--- @return #string Runway magnetic heading divided by ten (and rounded). Eg, "13" for 130�.
+-- @return #string Runway magnetic heading divided by ten (and rounded). Eg, "13" for 130°.
 function ATIS:GetMagneticRunway(windfrom)
 
   local diffmin=nil
@@ -1839,7 +1841,7 @@ function ATIS:GetNavPoint(navpoints, runway, left)
       local navL=self:GetRunwayLR(nav.runway)
       local hdgD=UTILS.HdgDiff(navy,rwyy)
 
-      if hdgD<=15 then --We allow an error of +-15� here.
+      if hdgD<=15 then --We allow an error of +-15° here.
         if navL==nil or (navL==true and left==true) or (navL==false and left==false) then
           return nav
         end

Moose Development/Moose/Utilities/Utils.lua

@@ -474,8 +474,11 @@ UTILS.tostringMGRS = function(MGRS, acc) --R2.1
   if acc == 0 then
     return MGRS.UTMZone .. ' ' .. MGRS.MGRSDigraph
   else
-    return MGRS.UTMZone .. ' ' .. MGRS.MGRSDigraph .. ' ' .. string.format('%0' .. acc .. 'd', UTILS.Round(MGRS.Easting/(10^(5-acc)), 0))
+    --return MGRS.UTMZone .. ' ' .. MGRS.MGRSDigraph .. ' ' .. string.format('%0' .. acc .. 'd', UTILS.Round(MGRS.Easting/(10^(5-acc)), 0))
-           .. ' ' .. string.format('%0' .. acc .. 'd', UTILS.Round(MGRS.Northing/(10^(5-acc)), 0))
+    --       .. ' ' .. string.format('%0' .. acc .. 'd', UTILS.Round(MGRS.Northing/(10^(5-acc)), 0))
+    
+    -- Truncate rather than round MGRS grid!        
+    return string.format("%s %s %s %s", MGRS.UTMZone, MGRS.MGRSDigraph, string.sub(tostring(MGRS.Easting), 1, acc), string.sub(tostring(MGRS.Northing), 1, acc))
   end
 end
 

Moose Development/Moose/Wrapper/Airbase.lua

@@ -227,7 +227,14 @@ AIRBASE.Normandy = {
   ["Funtington"] = "Funtington",
   ["Tangmere"] = "Tangmere",
   ["Ford"] = "Ford",
-  }
+  ["Goulet"] = "Goulet",
+  ["Argentan"] = "Argentan",
+  ["Vrigny"] = "Vrigny",
+  ["Essay"] = "Essay",
+  ["Hauterive"] = "Hauterive",
+  ["Barville"] = "Barville",
+  ["Conches"] = "Conches",
+}
 
 --- These are all airbases of the Persion Gulf Map:
 --
@@ -342,7 +349,7 @@ AIRBASE.TerminalType = {
 --- Runway data.
 -- @type AIRBASE.Runway
 -- @field #number heading Heading of the runway in degrees.
--- @field #string idx Runway ID: heading 070� ==> idx="07".
+-- @field #string idx Runway ID: heading 070° ==> idx="07".
 -- @field #number length Length of runway in meters.
 -- @field Core.Point#COORDINATE position Position of runway start.
 -- @field Core.Point#COORDINATE endpoint End point of runway.
@@ -482,7 +489,7 @@ function AIRBASE:GetID(unique)
 
   else
 
-   for DCSAirbaseId, DCSAirbase in pairs(world.getAirbases()) do
+   for DCSAirbaseId, DCSAirbase in ipairs(world.getAirbases()) do
 
       -- Get the airbase name.
       local AirbaseName = DCSAirbase:getName()
@@ -490,8 +497,12 @@ function AIRBASE:GetID(unique)
       -- This gives the incorrect value to be inserted into the airdromeID for DCS 2.5.6!
       local airbaseID=tonumber(DCSAirbase:getID())
 
+      local airbaseCategory=self:GetAirbaseCategory()
+
+      --env.info(string.format("FF airbase=%s id=%s category=%s", tostring(AirbaseName), tostring(airbaseID), tostring(airbaseCategory)))
+
       -- No way AFIK to get the DCS version. So we check if the event exists. That should tell us if we are on DCS 2.5.6 or prior to that.
-      if world.event.S_EVENT_KILL and world.event.S_EVENT_KILL>0 and self:GetAirbaseCategory()==Airbase.Category.AIRDROME then
+      if world.event.S_EVENT_KILL and world.event.S_EVENT_KILL>0 and airbaseCategory==Airbase.Category.AIRDROME then
 
         -- We have to take the key value of this loop!
         airbaseID=DCSAirbaseId
@@ -503,7 +514,7 @@ function AIRBASE:GetID(unique)
       end
 
       if AirbaseName==self.AirbaseName then
-        if self:GetAirbaseCategory()==Airbase.Category.SHIP then
+        if airbaseCategory==Airbase.Category.SHIP then
           -- Ships get a negative sign as their unit number might be the same as the ID of another airbase.
           return unique and -airbaseID or airbaseID
         else
@@ -1061,7 +1072,15 @@ end
 -- @param #AIRBASE self
 -- @return #number Category of airbase from GetDesc().category.
 function AIRBASE:GetAirbaseCategory()
-  return self:GetDesc().category
+  local desc=self:GetDesc()
+  local category=Airbase.Category.AIRDROME
+
+  if desc and desc.category then
+    category=desc.category
+  else
+    self:E(string.format("ERROR: Cannot get category of airbase %s due to DCS 2.5.6 bug! Assuming it is an AIRDROME for now...", tostring(self.AirbaseName)))
+  end
+  return category
 end
 
 
@@ -1164,7 +1183,7 @@ function AIRBASE:GetRunwayData(magvar, mark)
     -- Heading of runway.
     local hdg=c1:HeadingTo(c2)
 
-    -- Runway ID: heading=070� ==> idx="07"
+    -- Runway ID: heading=070° ==> idx="07"
     local idx=string.format("%02d", UTILS.Round((hdg-magvar)/10, 0))
 
     -- Runway table.
@@ -1274,7 +1293,7 @@ function AIRBASE:GetActiveRunway(magvar)
       local dot=UTILS.VecDot(Vwind, Vrunway)
 
       -- Debug.
-      --env.info(string.format("runway=%03d� dot=%.3f", runway.heading, dot))
+      --env.info(string.format("runway=%03d° dot=%.3f", runway.heading, dot))
 
       -- New min?
       if dotmin==nil or dot<dotmin then