Merge pull request #2427 from FlightControl-Master/master

Merge from master

Moose Development/Moose/Core/Astar.lua

@@ -157,8 +157,6 @@ ASTAR = {
 -- @field #number surfacetype Surface type.
 -- @field #table valid Cached valid/invalid nodes.
 -- @field #table cost Cached cost.
--- @field Core.Pathline#PATHLINE pathline Pathline that node is part of.
--- @field Core.Pathline#PATHLINE.Point pathpoint Pathline point.
 
 --- ASTAR infinity.
 -- @field #number INF
@@ -166,7 +164,7 @@ ASTAR.INF=1/0
 
 --- ASTAR class version.
 -- @field #string version
-ASTAR.version="0.5.0"
+ASTAR.version="0.4.0"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- TODO list
@@ -174,7 +172,6 @@ ASTAR.version="0.5.0"
 
 -- TODO: Add more valid neighbour functions.
 -- TODO: Write docs.
--- DONE: Add pathlines for seach/valid neighbours.
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Constructor
@@ -249,9 +246,6 @@ function ASTAR:AddNode(Node)
   self.nodes[Node.id]=Node
   self.Nnodes=self.Nnodes+1 
     
-  self:T3(self.lid..string.format("Adding node UID=%d", Node.id))
-  --Node.coordinate:MarkToAll(string.format("Node ID=%d", Node.id))
-    
   return self
 end
 
@@ -268,47 +262,6 @@ function ASTAR:AddNodeFromCoordinate(Coordinate)
   return node
 end
 
---- Adds nodes to the table of grid nodes from a PATHLINE.
--- @param #ASTAR self
--- @param Core.Pathline#PATHLINE Pathline Pathline or name of pathline. Has to exist.
--- @return #ASTAR self
-function ASTAR:AddNodeFromPathlineName(Pathline)
-
-  if type(Pathline)=="string" then
-    Pathline=PATHLINE:FindByName(Pathline)
-  end
-  
-  if Pathline then
-  
-    for i,_point in pairs(Pathline.points) do
-      local point=_point --Core.Pathline#PATHLINE.Point
-
-      -- Create node from point coordinate.
-      local node=self:AddNodeFromCoordinate(COORDINATE:NewFromVec3(point.vec3))
-      
-      -- Add pathline parameters.
-      node.pathline=Pathline
-      node.pathpoint=point
-      
-      -- Debug.
-      local name=node.pathline and node.pathline.name or "N/A"
-      local idx=node.pathline and node.pathline:_GetPointIndex(node.pathpoint) or "N/A"
-      
-      -- Debug message.
-      self:T(self.lid..string.format("Adding node UID=%d pathline=%s [%s]", node.id, name, tostring(idx)))
-            
-      -- Debug mark
-      --node.coordinate:MarkToAll(string.format("Node ID=%d\npathline=%s [%s]", node.id, name, tostring(idx)))
-      
-    end    
-    
-  else
-    env.error("FF error pathline")
-  end
-
-  return self
-end
-
 --- Check if the coordinate of a node has is at a valid surface type.
 -- @param #ASTAR self
 -- @param #ASTAR.Node Node The node to be added.
@@ -387,18 +340,6 @@ function ASTAR:SetValidNeighbourRoad(MaxDistance)
   return self
 end
 
---- Set valid neighbours to be on the same pathline or not further apart than 10 meters to jump from one pathline to another.
--- @param #ASTAR self
--- @param #number MaxDistance Max allowed distance between nodes of different pathlines in meters. Default is 10 m.
--- @return #ASTAR self
-function ASTAR:SetValidNeighbourPathline(MaxDistance)
-
-  self:SetValidNeighbourFunction(ASTAR.Pathline, MaxDistance)
-
-  return self
-end
-
-
 --- Set the function which calculates the "cost" to go from one to another node.
 -- The first to arguments of this function are always the two nodes under consideration. But you can add optional arguments.
 -- Very often the distance between nodes is a good measure for the cost.
@@ -443,7 +384,7 @@ end
 -- @return #ASTAR self
 function ASTAR:SetCostRoad()
 
-  self:SetCostFunction(ASTAR.Road)
+  self:SetCostFunction(ASTAR)
 
   return self
 end
@@ -603,55 +544,6 @@ function ASTAR.Road(nodeA, nodeB)
 
 end
 
---- Function to check if two nodes are on the same pathline or if nodes are less than 10 meters apart.
--- @param #ASTAR.Node nodeA First node.
--- @param #ASTAR.Node nodeB Other node.
--- @param #number distmax Max distance in meters. Default is 10 m.
--- @return #boolean If true, two nodes are connected.
-function ASTAR.Pathline(nodeA, nodeB, distmax)
-
-  distmax=distmax or 10
-
-  if nodeA.pathline.name==nodeB.pathline.name then
-  
-    -- Nodes are on the same pathline. We use the index to check if they are neighbours.
-  
-    local pathline=nodeA.pathline
-    
-    local idxA=pathline:_GetPointIndex(nodeA.pathpoint)
-    local idxB=pathline:_GetPointIndex(nodeB.pathpoint)
-    
-    if math.abs(idxA-idxB)<=1 then
-      return true
-    end
-    
-  else
-    
-    -- Check if nodeB is close to pathline of nodeA.
-    local c, dist, segA=nodeA.pathline:GetClosestPoint3D(nodeB.coordinate)
-    local seg=segA --Core.Pathline#PATHLINE.Segment
-    
-    if dist<distmax and (nodeA.pathpoint.uid==seg.p1.uid or nodeA.pathpoint.uid==seg.p2.uid) then
-      --env.info(string.format("FF NodeB=%d [pathline=%s] is close to NodeA=%d [pathline=%s] ==> valid neighbour", nodeB.id, nodeB.pathline.name, nodeA.id, nodeA.pathline.name))
-      return true
-    end
-
-
-    -- Check if nodeA is close to pathline of nodeB.
-    local c, dist, segB=nodeB.pathline:GetClosestPoint3D(nodeA.coordinate)
-    local seg=segB --Core.Pathline#PATHLINE.Segment
-
-    if dist<distmax and (nodeB.pathpoint.uid==seg.p1.uid or nodeB.pathpoint.uid==seg.p2.uid) then
-      --env.info(string.format("FF NodeA=%d [pathline=%s] is close to NodeB=%d [pathline=%s] ==> valid neighbour", nodeA.id, nodeA.pathline.name, nodeB.id, nodeB.pathline.name))
-      return true
-    end    
-    
-  end
-
-  return false
-end
-
-
 --- Function to check if distance between two nodes is less than a threshold distance.
 -- @param #ASTAR.Node nodeA First node.
 -- @param #ASTAR.Node nodeB Other node.
@@ -675,9 +567,7 @@ end
 -- @param #ASTAR.Node nodeB Other node.
 -- @return #number Distance between the two nodes.
 function ASTAR.Dist2D(nodeA, nodeB)
-  local dist=nodeA.coordinate:Get2DDistance(nodeB.coordinate)
-  --local text=string.format("FF Cost Dist2D NodeA=%d-->NodeB=%d = %.1f", nodeA.id, nodeB.id, dist)
-  --env.info(text)
+  local dist=nodeA.coordinate:Get2DDistance(nodeB)
   return dist
 end
 
@@ -714,6 +604,7 @@ function ASTAR.DistRoad(nodeA, nodeB)
     return dist
   end
   
+
   return math.huge
 end
 
@@ -723,11 +614,10 @@ end
 
 --- Find the closest node from a given coordinate.
 -- @param #ASTAR self
--- @param Core.Point#COORDINATE Coordinate Reference coordinate.
--- @param #table ExcludeNodes Table of nodes that are excluded.
--- @return #ASTAR.Node Closest node to the coordinate.
+-- @param Core.Point#COORDINATE Coordinate.
+-- @return #ASTAR.Node Cloest node to the coordinate.
 -- @return #number Distance to closest node in meters.
-function ASTAR:FindClosestNode(Coordinate, ExcludeNodes)
+function ASTAR:FindClosestNode(Coordinate)
 
   local distMin=math.huge
   local closeNode=nil
@@ -735,8 +625,6 @@ function ASTAR:FindClosestNode(Coordinate, ExcludeNodes)
   for _,_node in pairs(self.nodes) do
     local node=_node --#ASTAR.Node
     
-    if ExcludeNodes==nil or self:_IsNodeNotInTable(ExcludeNodes, node) then
-    
     local dist=node.coordinate:Get2DDistance(Coordinate)
     
     if dist<distMin then
@@ -746,168 +634,42 @@ function ASTAR:FindClosestNode(Coordinate, ExcludeNodes)
     
   end
     
-  end
-    
   return closeNode, distMin
 end
 
---- Find the closest pathline to a given reference coordinate.
--- @param #ASTAR self
--- @param Core.Point#COORDINATE Coordinate Reference coordinate.
--- @return Core.Pathline#PATHLINE Closest pathline
--- @return #number Distance in meters.
--- @return DCS#Vec3 Closest point on pathline to the ref coordinate.
--- @return Core.Pathline#PATHLINE.Segment Segment.
-function ASTAR:FindClosestPathline(Coordinate)
-
-  local pathline=nil --Core.Pathline#PATHLINE
-  local dist=math.huge
-  local vec3=nil
-  local S=nil
-  
-  for _,_node in pairs(self.nodes) do
-    local node=_node --#ASTAR.Node
-    
-    if node.pathline then
-    
-      local vec, d, s=node.pathline:GetClosestPoint3D(Coordinate)
-      
-      if d<dist then
-        pathline=node.pathline
-        dist=d
-        vec3=vec
-        S=s        
-      end
-    
-    end    
-  end
-  
-  if pathline then
-    -- Debug info.
-    self:T(self.lid..string.format("Closest pathline %s: dist=%.1f", pathline.name, dist))
-  end
-
-  return pathline, dist, vec3, S
-end
-
---- Find the closest node to the given coordinate.
--- @param #ASTAR self
--- @param Core.Point#COORDINATE Coord Reference coordinate.
--- @param #table ExcludeNodes Nodes that are excluded.
--- @return #ASTAR.Node The node that was fround
-function ASTAR:_FindClosestTerminalNode(Coord, ExcludeNodes)
-  
-  -- Find the closest pathline to the ref coordinate.
-  local pathline, dist, vec3, s=self:FindClosestPathline(Coord)
-
-  -- Find the closest node to the given start coordinate.
-  local node, dist2=self:FindClosestNode(Coord)
-  
-  if pathline and vec3 and dist and dist2>dist then
-
-    -- Create a node on the closest pathline so we first go straight there and then along the pathline.
-    local node=self:AddNodeFromCoordinate(COORDINATE:NewFromVec3(vec3))
-    
-    -- We also need the pathline point.    
-    local point=pathline:AddPointFromVec3(vec3, nil, s.p1)
-
-    node.pathline=pathline    
-    node.pathpoint=point
-    
-    self:T2(self.lid..string.format("Added new node=%d, which is closest to start coord. dist=%.1f m", node.id, dist))
-  end
-
-  -- Find the closest node to the given start coordinate.
-  local Node, dist3=self:FindClosestNode(Coord, ExcludeNodes)
-
-  -- Debug info.
-  self:T(self.lid..string.format("CLOSEST node ID=%d, distance=%.1f", Node.id, dist3))
-
-  return Node, dist3
-end
-
-
 --- Find the start node.
 -- @param #ASTAR self
+-- @param #ASTAR.Node Node The node to be added to the nodes table.
 -- @return #ASTAR self
 function ASTAR:FindStartNode()
 
-  -- Find the closest pathline to the 
-  local pathline, dist, vec3, s=self:FindClosestPathline(self.startCoord)
+  local node, dist=self:FindClosestNode(self.startCoord)
   
-  -- Find the closest node to the given start coordinate.
-  local node, dist2=self:FindClosestNode(self.startCoord)
+  self.startNode=node
   
-  if pathline and vec3 and dist and dist2>dist then
-
-    -- Create a node on the closest pathline so we first go straight there and then along the pathline.
-    local node=self:AddNodeFromCoordinate(COORDINATE:NewFromVec3(vec3))
-    
-    -- We also need the pathline point.    
-    local point=pathline:AddPointFromVec3(vec3, nil, s.p1)
-
-    node.pathline=pathline    
-    node.pathpoint=point
-    
-    self:T2(self.lid..string.format("Added new node=%d, which is closest to start coord. dist=%.1f m", node.id, dist))
+  if dist>1000 then
+    self:T(self.lid.."Adding start node to node grid!")
+    self:AddNode(node)
   end
     
-  -- Find the closest node to the given start coordinate.
-  self.startNode, dist2=self:FindClosestNode(self.startCoord)
-  
-  --self.startNode.coordinate:MarkToAll("Start Node")
-  
-  -- Debug info.
-  self:T(self.lid..string.format("START node ID=%d", self.startNode.id))
-  
-  -- Not sure why I did this. The node does not need to be added again as it is already contained in self.nodes!
-  --  if dist>1000 then
-  --    self:T(self.lid.."Adding start node to node grid!")
-  --    self:AddNode(node)
-  --  end
-    
   return self
 end
 
---- Find the end node.
+--- Add a node.
 -- @param #ASTAR self
+-- @param #ASTAR.Node Node The node to be added to the nodes table.
 -- @return #ASTAR self
 function ASTAR:FindEndNode()
 
-  local pathline, dist, vec3, s=self:FindClosestPathline(self.endCoord)
+  local node, dist=self:FindClosestNode(self.endCoord)
 
-  -- Find the closest node to the given start coordinate.
-  local node, dist2=self:FindClosestNode(self.endCoord)  
+  self.endNode=node
   
-  if pathline and vec3 and dist and dist2>dist then
-
-    -- Create a node on the closest pathline so we first go straight there and then along the pathline.
-    local node=self:AddNodeFromCoordinate(COORDINATE:NewFromVec3(vec3))
-        
-    -- We also need the point.
-    local point=pathline:AddPointFromVec3(vec3, nil, s.p1)
-    
-    -- Add pathline parameters to node.
-    node.pathline=pathline
-    node.pathpoint=point
-    
-    self:T2(self.lid..string.format("Added new node=%d, which is closest to END coord: dist=%.1f m", node.id, dist))
+  if dist>1000 then
+    self:T(self.lid.."Adding end node to node grid!")
+    self:AddNode(node)
   end
     
-  -- Find closest node to the end coordinate (exclude the start coordinate.
-  self.endNode, dist=self:FindClosestNode(self.endCoord, {self.startNode})
-  
-  --self.endNode.coordinate:MarkToAll("End Node")
-  
-  -- Debug info.
-  self:T(self.lid..string.format("END node ID=%d", self.endNode.id))
-  
-  -- Not sure why I did this. The node does not need to be added again as it is already contained in self.nodes!
-  --  if dist>1000 then
-  --    self:T(self.lid.."Adding end node to node grid!")
-  --    self:AddNode(node)
-  --  end
-    
   return self
 end
 
@@ -922,22 +684,13 @@ end
 -- @return #table Table of nodes from start to finish.
 function ASTAR:GetPath(ExcludeStartNode, ExcludeEndNode)
 
---  self:FindStartNode()
---  self:FindEndNode()
-  
-  -- Find start Node (closest node to start coordinate).
-  self.startNode=self:_FindClosestTerminalNode(self.startCoord)
-  
-  -- Find end node, which is not the start node (excluded).
-  self.endNode=self:_FindClosestTerminalNode(self.endCoord, {self.startNode})
+  self:FindStartNode()
+  self:FindEndNode()
 
   local nodes=self.nodes
   local start=self.startNode
   local goal=self.endNode
 
-  -- Debug info.
-  self:T(self.lid..string.format("GetPath Start Node=%d, End Node=%d", start.id, goal.id))
-
   -- Sets.
   local openset   = {}
   local closedset = {}
@@ -994,11 +747,6 @@ function ASTAR:GetPath(ExcludeStartNode, ExcludeEndNode)
       end
       text=text..string.format(", Nvalid=%d [%d cached]", self.nvalid, self.nvalidcache)
       text=text..string.format(", Ncost=%d [%d cached]", self.ncost, self.ncostcache)
-      text=text..string.format("\nNodes:")
-      for i,_node in ipairs(path) do
-        local node=_node --#ASTAR.Node
-        text=text..string.format("\n[%d] Node ID=%d", i, node.id)
-      end
       self:T(self.lid..text)
       
       return path
@@ -1015,12 +763,9 @@ function ASTAR:GetPath(ExcludeStartNode, ExcludeEndNode)
     -- Loop over neighbours.
     for _,neighbor in pairs(neighbors) do
     
-      -- Node is not in closed set.
       if self:_NotIn(closedset, neighbor.id) then
       
-        -- Calculate tentative_g_score.
-        --local tentative_g_score=g_score[current.id] + self:_DistNodes(current, neighbor)
-        local tentative_g_score=g_score[current.id] + self:_HeuristicCost(current, neighbor)
+        local tentative_g_score=g_score[current.id]+self:_DistNodes(current, neighbor)
          
         if self:_NotIn(openset, neighbor.id) or tentative_g_score < g_score[neighbor.id] then
         
@@ -1048,73 +793,6 @@ function ASTAR:GetPath(ExcludeStartNode, ExcludeEndNode)
   return nil -- no valid path
 end
 
---- A* pathfinding function. This seaches the path along nodes between start and end nodes/coordinates. 
--- It automatically creates a PATHLINE object that is returned in combination with the nodes of the optimal path. 
--- @param #ASTAR self
--- @param #boolean ExcludeStartNode If *true*, do not include start node in found path. Default is to include it.
--- @param #boolean ExcludeEndNode If *true*, do not include end node in found path. Default is to include it.
--- @return Core.Pathline#PATHLINE Pathline.
--- @return #table Nodes of path.
-function ASTAR:GetPathline(ExcludeStartNode, ExcludeEndNode)
-
-  local nodes=self:GetPath(ExcludeStartNode, ExcludeEndNode)
-  
-  local pathline=nil --Core.Pathline#PATHLINE
-  if nodes then
-  
-    pathline=PATHLINE:New("Astar")
-  
-    for _,_node in pairs(nodes) do
-      local node=_node --#ASTAR.Node 
-      
-      local point=pathline:AddPointFromVec3(node.coordinate)
-      point.name=node.pathline.name
-          
-    end
-      
-  end
-
-  return pathline, nodes
-end
-
---- Get pathlines from nodes.
--- @param #ASTAR self
--- @param #table Nodes Given nodes.
--- @return #table Table of PATHLINES used in the path.
-function ASTAR:GetPathlinesFromNodes(Nodes)
-
-  local pathlines={}
-  
-  --for _,_node in pairs(Nodes or {}) do
-  for i=1,#Nodes do
-    local node=Nodes[i] --#ASTAR.Node
-    
-    -- Pathline.
-    local pathline=node.pathline
-    
-    if pathline and i>1 and i<#Nodes then
-      
-      -- Previous and next nodes.
-      local n=Nodes[i-1] --#ASTAR.Node
-      local N=Nodes[i+1] --#ASTAR.Node
-      
-      -- Check if previous and next nodes are on the same pathline.
-      -- If only one point in beteen is of another pathline, this is a junction and we dont actually switch to the other pathline.
-      if n.pathline and N.pathline and n.pathline.name==N.pathline.name and n.pathline.name~=pathline.name then
-        pathline=n.pathline
-      end
-      
-    end
-
-    -- We do not want to add the same pathline two times in a row.
-    if #pathlines==0 or (#pathlines>0 and pathlines[#pathlines].name~=pathline.name) then      
-      table.insert(pathlines, pathline)
-    end
-  end
-
-  return pathlines
-end
-
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- A* pathfinding helper functions
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
@@ -1133,18 +811,16 @@ function ASTAR:_HeuristicCost(nodeA, nodeB)
   local cost=nodeA.cost[nodeB.id]
   if cost~=nil then
     self.ncostcache=self.ncostcache+1
-    self:T(self.lid..string.format("Cost nodeA=%d --> nodeB=%d = %.1f (Cashed!)", nodeA.id, nodeB.id, cost))
     return cost
   end
 
+  local cost=nil
   if self.CostFunc then
     cost=self.CostFunc(nodeA, nodeB, unpack(self.CostArg))
   else
     cost=self:_DistNodes(nodeA, nodeB)
   end
   
-  self:T(self.lid..string.format("Cost nodeA=%d --> nodeB=%d = %.1f", nodeA.id, nodeB.id, cost))
-  
   nodeA.cost[nodeB.id]=cost
   nodeB.cost[nodeA.id]=cost  -- Symmetric problem. 
   
@@ -1158,10 +834,9 @@ end
 -- @return #boolean If true, transition between nodes is possible.
 function ASTAR:_IsValidNeighbour(node, neighbor)
 
-  -- Counter of function calls.
+  -- Counter.
   self.nvalid=self.nvalid+1
   
-  -- Check if neighbour is in cached set.
   local valid=node.valid[neighbor.id]
   if valid~=nil then
     --env.info(string.format("Node %d has valid=%s neighbour %d", node.id, tostring(valid), neighbor.id))
@@ -1169,16 +844,13 @@ function ASTAR:_IsValidNeighbour(node, neighbor)
     return valid
   end
 
-  -- Check if this is a valid neighbour.
   local valid=nil
   if self.ValidNeighbourFunc then
     valid=self.ValidNeighbourFunc(node, neighbor, unpack(self.ValidNeighbourArg))  
   else
-    -- If no valid neighbour function is defined, we assume all nodes are valid neighbours.
     valid=true
   end
 
-  -- Cache valid neighbour.
   node.valid[neighbor.id]=valid
   neighbor.valid[node.id]=valid  -- Symmetric problem. 
 
@@ -1212,9 +884,6 @@ function ASTAR:_LowestFscore(set, f_score)
     end
   end
   
-  -- Debug info.
-  self:T(self.lid..string.format("Lowest Fscore=%.1f, Node=%s", lowest, tostring(bestNode)))
-  
   return self.nodes[bestNode]
 end
 
@@ -1259,46 +928,16 @@ end
 -- @param #table map Map.
 -- @param #ASTAR.Node current_node The current node.
 -- @return #table Unwinded path.
-function ASTAR:_UnwindPath(flat_path, map, current_node)
+function ASTAR:_UnwindPath( flat_path, map, current_node )
 
-  local previous_node=map[current_node]
-
-  if previous_node then
-    table.insert(flat_path, 1, previous_node) 
-    return self:_UnwindPath(flat_path, map, previous_node)
+  if map [current_node] then
+    table.insert (flat_path, 1, map[current_node]) 
+    return self:_UnwindPath(flat_path, map, map[current_node])
   else
-    -- No previous node ==> return path.
     return flat_path
   end
 end
 
---- Function to check if a certain node is in a given table.
--- @param #ASTAR self
--- @param #table Nodes Nodes table.
--- @param #ASTAR.Node Node The node to check.
--- @return #boolean If true, the node is not in the set.
-function ASTAR:_IsNodeInTable(Nodes, Node)
-
-  for _,_node in pairs(Nodes) do
-    local node=_node --#ASTAR.Node
-    if node.id==Node.id then
-      return true
-    end
-  end
-
-  return false
-end
-
---- Function to check if a certain node is **not** in a given table.
--- @param #ASTAR self
--- @param #table Nodes Nodes table.
--- @param #ASTAR.Node Node The node to check.
--- @return #boolean If true, the node is not in the set.
-function ASTAR:_IsNodeNotInTable(Nodes, Node)
-  local is=self:_IsNodeInTable(Nodes, Node)
-  return not is
-end
-
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Core/Pathline.lua

@@ -5,8 +5,6 @@
 --    * Path from A to B
 --    * Arbitrary number of points
 --    * Automatically from lines drawtool
---    * Draw line or mark points on F10 map
---    * Find closest points to path
 --
 -- ===
 --
@@ -23,7 +21,6 @@
 -- @field #string lid Class id string for output to DCS log file.
 -- @field #string name Name of the path line.
 -- @field #table points List of 3D points defining the path.
--- @field #number counter Running number counting the point IDs.
 -- @extends Core.Base#BASE
 
 --- *The shortest distance between two points is a straight line.* -- Archimedes
@@ -62,39 +59,27 @@ PATHLINE = {
   ClassName      = "PATHLINE",
   lid            =   nil,
   points         =    {},
-  counter        =     0,
 }
 
 --- Point of line.
 -- @type PATHLINE.Point
--- @field #number uid Unique ID of this point.
--- @field #string mother Name of the pathline this point belongs to.
--- @field #string name Name of this point.
 -- @field DCS#Vec3 vec3 3D position.
 -- @field DCS#Vec2 vec2 2D position.
 -- @field #number surfaceType Surface type.
 -- @field #number landHeight Land height in meters.
 -- @field #number depth Water depth in meters.
 -- @field #number markerID Marker ID.
--- @field #number lineID Marker of pathline ID.
-
---- Segment of line.
--- @type PATHLINE.Segment
--- @field #PATHLINE.Point p1 First point.
--- @field #PATHLINE.Point p2 Second point.
 
 
 --- PATHLINE class version.
 -- @field #string version
-PATHLINE.version="0.3.0"
+PATHLINE.version="0.1.1"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- TODO list
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
--- TODO: Read/write to JSON file
--- TODO: Translate/rotate pathline
--- TODO: Add color.
+-- TODO: A lot...
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Constructor
@@ -111,7 +96,7 @@ function PATHLINE:New(Name)
   
   self.name=Name or "Unknown Path"
 
-  self.lid=string.format("PATHLINE %s | ", self.name)
+  self.lid=string.format("PATHLINE %s | ", Name)
 
   return self
 end
@@ -166,30 +151,15 @@ end
 --- Add a point to the path from a given 2D position. The third dimension is determined from the land height.
 -- @param #PATHLINE self
 -- @param DCS#Vec2 Vec2 The 2D vector (x,y) to add.
--- @param #number Index Index to add this point, *e.g.* 1 for first point or 2 for second point. Default is at the end.
--- @param #PATHLINE.Point Point Add point after given point. Default is at the end or at given index.
 -- @return #PATHLINE self
-function PATHLINE:AddPointFromVec2(Vec2, Index, Point)
+function PATHLINE:AddPointFromVec2(Vec2)
 
   if Vec2 then
   
-    -- Create a new point.
     local point=self:_CreatePoint(Vec2)
 
-    if Index then
-      -- Add at given index.
-      table.insert(self.points, Index, point)
-    else
-      if Point then
-        -- Get index of given point.
-        local i=self:_GetPointIndex(Point)
-        -- Add new point after given point.
-        table.insert(self.points, i+1, point)
-      else
-        -- Add add the end.
     table.insert(self.points, point)
-      end
-    end
+    
   end
   
   return self
@@ -198,32 +168,18 @@ end
 --- Add a point to the path from a given 3D position.
 -- @param #PATHLINE self
 -- @param DCS#Vec3 Vec3 The 3D vector (x,y) to add.
--- @param #number Index Index to add this point, *e.g.* 1 for first point or 2 for second point. Default is at the end.
--- @param #PATHLINE.Point Point Add point after given point. Default is at the end or at given index.
--- @return #PATHLINE.Point Point that was added.
-function PATHLINE:AddPointFromVec3(Vec3, Index, Point)
+-- @return #PATHLINE self
+function PATHLINE:AddPointFromVec3(Vec3)
 
   if Vec3 then
   
     local point=self:_CreatePoint(Vec3)
 
-    if Index then
-      -- Add add given index.
-      table.insert(self.points, Index, point)
-    else
-      if Point then
-        local i=self:_GetPointIndex(Point)
-        table.insert(self.points, i+1, point)
-      else
-        -- Add add the end.
     table.insert(self.points, point)
-      end
+    
   end
   
-    return point
-  end
-
-  return nil
+  return self
 end
 
 --- Get name of pathline.
@@ -243,31 +199,14 @@ end
 
 --- Get points of pathline. Not that points are tables, that contain more information as just the 2D or 3D position but also the surface type etc.
 -- @param #PATHLINE self
--- @return #list <Core.Pathline#PATHLINE.Point> List of points.
+-- @return #list <#PATHLINE.Point> List of points.
 function PATHLINE:GetPoints()  
   return self.points
 end
 
---- Get segments of pathline.
--- @param #PATHLINE self
--- @return #list <Core.Pathline#PATHLINE.Segment> List of points.
-function PATHLINE:GetSetments()
-
-  local segments={}
-
-  for i=1,#self.points-1 do
-    local segment={} --#PATHLINE.Segment
-    segment.p1=self.points[i]
-    segment.p2=self.points[i+1]
-    table.insert(segments, segment)
-  end
-
-  return segments
-end
-
 --- Get 3D points of pathline.
 -- @param #PATHLINE self
--- @return #list <DCS#Vec3> List of DCS#Vec3 points.
+-- @return <DCS#Vec3> List of DCS#Vec3 points.
 function PATHLINE:GetPoints3D()
 
   local vecs={}
@@ -282,7 +221,7 @@ end
 
 --- Get 2D points of pathline.
 -- @param #PATHLINE self
--- @return #list <DCS#Vec2> List of DCS#Vec2 points.
+-- @return <DCS#Vec2> List of DCS#Vec2 points.
 function PATHLINE:GetPoints2D()
 
   local vecs={}
@@ -305,7 +244,7 @@ function PATHLINE:GetCoordinates()
   for _,_point in pairs(self.points) do
     local point=_point --#PATHLINE.Point
     local coord=COORDINATE:NewFromVec3(point.vec3)
-    table.insert(vecs, coord)
+    table.insert(vecs,coord)
   end
 
   return vecs
@@ -366,16 +305,14 @@ end
 --- Mark points on F10 map.
 -- @param #PATHLINE self
 -- @param #boolean Switch If `true` or nil, set marks. If `false`, remove marks.
--- @return #PATHLINE self
+-- @return <DCS#Vec3> List of DCS#Vec3 points.
 function PATHLINE:MarkPoints(Switch)
-
   for i,_point in pairs(self.points) do
     local point=_point --#PATHLINE.Point
-
     if Switch==false then
       
       if point.markerID then
-        UTILS.RemoveMark(point.markerID)
+        UTILS.RemoveMark(point.markerID, Delay)
       end
       
     else
@@ -386,294 +323,15 @@ function PATHLINE:MarkPoints(Switch)
     
       point.markerID=UTILS.GetMarkID()
       
-      local text=string.format("Pathline %s: Point #%d [UID=%d]\nSurface Type=%d\nHeight=%.1f m\nDepth=%.1f m", self.name, i, point.uid, point.surfaceType, point.landHeight, point.depth)
+      local text=string.format("Pathline %s: Point #%d\nSurface Type=%d\nHeight=%.1f m\nDepth=%.1f m", self.name, i, point.surfaceType, point.landHeight, point.depth)
       
       trigger.action.markToAll(point.markerID, text, point.vec3, "")
     
     end
   end
-
-  return self
 end
 
 
---- Draw line on F10 map.
--- @param #PATHLINE self
--- @param #boolean Switch If `true` or nil, draw pathline. If `false`, remove drawing.
--- @param #number Coalition Coalition side. Default -1 for all.
--- @param #table Color RGB color and alpha `{r, g, b, a}`. Default {0, 1, 0, 0.5}.
--- @param #number LineType Line type. Default 1=solid.
--- @return #PATHLINE self
-function PATHLINE:Draw(Switch, Coalition, Color, LineType)
-
-  Coalition=Coalition or -1
-  Color=Color or {0, 1, 0, 0.5}
-  LineType=LineType or 1
-
-  if Switch==false then
-
-    for i,_point in pairs(self.points) do
-      local point=_point --#PATHLINE.Point
-
-      if point.lineID then
-        UTILS.RemoveMark(point.lineID)
-      end
-
-    end
-
-  else
-
-    for i=2,#self.points do
-
-      local p1=self.points[i-1] --#PATHLINE.Point
-      local p2=self.points[i]   --#PATHLINE.Point
-
-      if p2.lineID then
-        UTILS.RemoveMark(p2.lineID)
-      end
-
-      p2.lineID=UTILS.GetMarkID()
-
-      trigger.action.lineToAll(Coalition, p2.lineID, p1.vec3, p2.vec3, Color, LineType)
-
-    end
-
-  end
-
-  return self
-end
-
---- Get the closest point on the pathline for a given reference point.
--- @param #PATHLINE self
--- @param DCS#Vec2 Vec2 Reference Point in 2D.
--- @return DCS#Vec2 Cloest point on pathline.
--- @return #number Distance from closest point to ref point in meters.
--- @return #PATHLINE.Segment Closest segment of ref point.
-function PATHLINE:GetClosestPoint2D(Vec2)
-
-  local P=nil --DCS#Vec2
-  local D=math.huge
-  local S={} --#PATHLINE.Segment
-
-  for i=2,#self.points do
-
-    local A=self.points[i-1] --#PATHLINE.Point
-    local B=self.points[i]   --#PATHLINE.Point
-
-    local a=A.vec2
-    local b=B.vec2
-
-    local ab=UTILS.Vec2Substract(b, a)
-    local ap=UTILS.Vec2Substract(Vec2, a)
-
-    local proj=UTILS.Vec2Dot(ap, ab)
-
-    local lab=UTILS.Vec2Norm(ab)
-
-    local f=proj/lab/lab
-
-    -- Debug info.
-    local text=string.format("FF Proj=%.1f, |ab|=%.1f, f=%.1f", proj, lab, f)
-    self:T(self.lid..text)
-
-    -- Cases for finite segment.
-    local p=nil --DCS#Vec2
-    if f<0 then
-      p=a
-    elseif f>1 then
-      p=b
-    else
-      local r=UTILS.Vec2Mult(ab, f)
-      p=UTILS.Vec2Add(a, r)
-    end
-
-    -- Distance.
-    local d=UTILS.VecDist2D(p, Vec2)
-
-    if d<=D then
-      D=d
-      P=p
-      S.p1=A
-      S.p2=B
-    end
-
-  end
-
-  return P, D, S
-end
-
---- Get the closest point on the pathline for a given reference point.
--- This point does not necessarily is a node of the pathline. In general it will be somewhere in between the nodes defining the pathline.
--- @param #PATHLINE self
--- @param DCS#Vec3 Vec3 Reference Point in 3D. Can also be a `COORDINATE`.
--- @return DCS#Vec3 Closest point on pathline.
--- @return #number Distance from closest point to ref point in meters.
--- @return #PATHLINE.Segment Closest segment of ref point.
-function PATHLINE:GetClosestPoint3D(Vec3)
-
-  local P=nil --DCS#Vec3
-  local D=math.huge
-  local S={} --#PATHLINE.Segment
-
-  if not Vec3 then
-    self:E(self.lid.."ERROR: input Vec3 is nil!")
-    return nil, nil, nil
-  end
-
-  for i=2,#self.points do
-
-    local A=self.points[i-1] --#PATHLINE.Point
-    local B=self.points[i]   --#PATHLINE.Point
-
-    local a=A.vec3
-    local b=B.vec3
-
-    local ab=UTILS.VecSubstract(b, a)
-    local ap=UTILS.VecSubstract(Vec3, a)
-
-    local proj=UTILS.VecDot(ap, ab)
-
-    local lab=UTILS.VecNorm(ab)
-
-    local f=proj/lab/lab
-
-    -- Debug info.
-    self:T(self.lid..string.format("Proj=%.1f, |ab|=%.1f, f=%.1f", proj, lab, f))
-
-    -- Cases for finite segment.
-    local p=nil --DCS#Vec2
-    if f<0 then
-      p=a
-    elseif f>1 then
-      p=b
-    else
-      local r=UTILS.VecMult(ab, f)
-      p=UTILS.VecAdd(a, r)
-    end
-
-    -- Distance.
-    local d=UTILS.VecDist3D(p, Vec3)
-
-    if d<=D then
-      D=d
-      P=p
-      S.p1=A
-      S.p2=B
-    end
-
-  end
-
-  return P, D, S
-end
-
-
---- Write PATHLINE to JSON file.
--- **NOTE**: Requires `io` and `lfs` to be de-sanitized!
--- @param #PATHLINE self
--- @param #string FileName Name of the file. Default is the name of the pathline.
--- @return #PATHLINE self
-function PATHLINE:WriteJSON(FileName)
-
-  if io and lfs then
-
-    -- JSON script.
-    local json=loadfile("Scripts\\JSON.lua")()
-
-    local data={}
-
-    -- We store the name and the points.
-    data.name=self.name
-    data.points=self.points
-    for i,_point in pairs(self.points) do
-      local point=_point --#PATHLINE.Point
-      --point.markerID=nil
-    end
-
-    -- Encode data to raw JSON. Encode converts a lua table into JSON string that can be written to file.
-    local raw_json=json:encode(data)
-
-    -- Debug data.
-    self:T(data)
-
-    -- Write in "User/Saved Games/" Folder.
-    local filepath=lfs.writedir() .. FileName
-
-    -- Open file for writing.
-    local f = io.open(filepath, "wb")
-    if f then
-      f:write(raw_json)
-      f:close()
-      self:T(self.lid .. string.format("Saving PATHLINE %s file %s", self.name, tostring(filepath)))
-    else
-      self:E(self.lid .. string.format( "ERROR: Could not save PATHLINE to file %s", tostring(filepath)))
-    end
-
-  else
-    self:E(self.lid .. string.format( "ERROR: Could not save results because IO and/or LFS are not de-sanitized!"))
-  end
-
-end
-
---- Read PATHLINE from JSON file.
--- **NOTE**: Requires `io` and `lfs` to be de-sanitized!
--- @param #PATHLINE self
--- @param #string FileName Name of the file.
--- @return #PATHLINE self
-function PATHLINE:NewFromJSON(FileName)
-
-  if io and lfs then
-
-    -- JSON script.
-    local json=loadfile("Scripts\\JSON.lua")()
-
-    local data={}
-
-    -- Write in "User/Saved Games/" Folder.
-    local filepath=lfs.writedir() .. FileName
-
-    --env.info(filepath)
-
-    -- Open file in binary mode for reading.
-    local f = io.open(filepath, "rb")
-    if f then
-      data = f:read("*all")
-      f:close()
-    else
-      env.info(string.format("WARNING: Could not load PATHLINE from file %s!", tostring(filepath)))
-      return nil
-    end
-
-    -- Decode JSON data to get a lua table.
-    local data=json:decode(data)
-
-    if data and data.name then
-
-      -- Create a new pathline instance.
-      local self=PATHLINE:New(data.name)
-
-      for i=1,#data.points do
-        local point=data.points[i] --#PATHLINE.Point
-
-        -- Create new point from data.
-        local p=self:AddPointFromVec3(point.vec3)
-
-        -- Set name.
-        p.name=point.name
-
-        -- Remove marker ID.
-        p.markerID=nil
-      end
-
-      return self
-    else
-      BASE:E("ERROR: Cannot find pathline name in data from JSON file. File may be corrupted!")
-    end
-  else
-    BASE:E("ERROR: IO and/or LFS not de-sanitized! Cannot read file.")
-  end
-
-end
-
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Private functions
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
@@ -681,18 +339,11 @@ end
 --- Get 3D points of pathline.
 -- @param #PATHLINE self
 -- @param DCS#Vec3 Vec Position vector. Can also be a DCS#Vec2 in which case the altitude at landheight is taken.
--- @return #PATHLINE.Point Pathline Point.
+-- @return #PATHLINE.Point
 function PATHLINE:_CreatePoint(Vec)
 
   local point={} --#PATHLINE.Point
 
-  self.counter=self.counter+1
-
-  point.uid=self.counter
-  point.mother=self.name
-
-  point.name=string.format("%s #%d", self.name, point.uid)
-
   if Vec.z then
     -- Given vec is 3D
     point.vec3=UTILS.DeepCopy(Vec)
@@ -714,23 +365,6 @@ function PATHLINE:_CreatePoint(Vec)
   return point
 end
 
---- Get index of point in the lua table.
--- @param #PATHLINE self
--- @param #PATHLINE.Point Point Given point.
--- @return #number index
-function PATHLINE:_GetPointIndex(Point)
-
-  for i,_point in pairs(self.points) do
-    local point=_point --#PATHLINE.Point
-
-    if point.uid==Point.uid then
-      return i
-    end
-
-  end
-
-  return nil
-end
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Core/Point.lua

@@ -457,23 +457,6 @@ do -- COORDINATE
   end
 
 
-  --- Returns the coordinate from the latitude and longitude given in degrees, minutes and seconds (DMS).
-  -- @param #COORDINATE self
-  -- @param #string Latitude Latitude in DMS as string, e.g. "`42° 24' 14.3"`". Not that the characters `°`, `'` and `"` are important.
-  -- @param #string Longitude Longitude in DMS as string, e.g. "`42° 24' 14.3"`". Not that the characters `°`, `'` and `"` are important.
-  -- @param #number Altitude (Optional) Altitude in meters. Default is the land height at the coordinate.
-  -- @return #COORDINATE
-  function COORDINATE:NewFromLLDMS(Latitude, Longitude, Altitude)
-  
-    local lat=UTILS.LLDMSstringToDD(Latitude)
-    local lon=UTILS.LLDMSstringToDD(Longitude)
-    
-    self=COORDINATE:NewFromLLDD(lat, lon, Altitude)
-  
-    return self
-  end  
-
-
   --- Returns if the 2 coordinates are at the same 2D position.
   -- @param #COORDINATE self
   -- @param #COORDINATE Coordinate
@@ -1654,6 +1637,7 @@ do -- COORDINATE
       if AirbaseCategory == Airbase.Category.SHIP or AirbaseCategory == Airbase.Category.HELIPAD then
         RoutePoint.linkUnit = AirbaseID
         RoutePoint.helipadId = AirbaseID
+        RoutePoint.airdromeId = airbase:IsAirdrome() and AirbaseID or nil
       elseif AirbaseCategory == Airbase.Category.AIRDROME then
         RoutePoint.airdromeId = AirbaseID
       else

Moose Development/Moose/Core/Zone.lua

@@ -306,20 +306,6 @@ function ZONE_BASE:GetCoordinate( Height ) --R2.1
   return self.Coordinate
 end
 
----  Returns the @{Core.Vector#VECTOR} of the zone.
--- @param #ZONE_BASE self
--- @param DCS#Distance Height The height in meters to add to the land height where the center of the zone is located.
--- @return Core.Vector#VECTOR The vector of the zone.
-function ZONE_BASE:GetVector( Height )
-  self:F2(self.ZoneName)
-
-  local Vec3 = self:GetVec3( Height )
-  
-  local vector=VECTOR:NewFromVec(Vec3)
-
-  return vector
-end
-
 --- Get 2D distance to a coordinate.
 -- @param #ZONE_BASE self
 -- @param Core.Point#COORDINATE Coordinate Reference coordinate. Can also be a DCS#Vec2 or DCS#Vec3 object.

Moose Development/Moose/Functional/Scoring.lua

@@ -320,8 +320,8 @@ function SCORING:New( GameName, SavePath, AutoSave )
 
   -- Create the CSV file.
   self.AutoSavePath = SavePath
-  self.AutoSave = AutoSave or true
-  if self.AutoSave == true then
+  self.AutoSave = (AutoSave == nil or AutoSave == true) and true or false
+  if self.AutoSavePath and self.AutoSave == true then
     self:OpenCSV( GameName )
   end
 

Moose Development/Moose/Modules.lua

@@ -32,7 +32,6 @@ __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Core/MarkerOps_Base.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Core/TextAndSound.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Core/Pathline.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Core/ClientMenu.lua')
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Core/Vector.lua')
 
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Wrapper/Object.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Wrapper/Identifiable.lua' )
@@ -187,11 +186,4 @@ __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Tasking/Task_Cargo_Dispatcher
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Tasking/Task_Capture_Zone.lua' )
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Tasking/Task_Capture_Dispatcher.lua' )
 
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/Beacons.lua' )
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/Point.lua' )
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/Procedure.lua' )
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/FlightPlan.lua' )
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/Radios.lua' )
-__Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Navigation/Towns.lua' )
-
 __Moose.Include( MOOSE_DEVELOPMENT_FOLDER..'/Moose/Globals.lua' )

Moose Development/Moose/Modules_local.lua

@@ -32,7 +32,6 @@ __Moose.Include( 'Core\\MarkerOps_Base.lua' )
 __Moose.Include( 'Core\\TextAndSound.lua' )
 __Moose.Include( 'Core\\Condition.lua' )
 __Moose.Include( 'Core\\ClientMenu.lua' )
-__Moose.Include( 'Core\\Vector.lua' )
 
 __Moose.Include( 'Wrapper\\Object.lua' )
 __Moose.Include( 'Wrapper\\Identifiable.lua' )
@@ -178,9 +177,4 @@ __Moose.Include( 'Tasking\\Task_Cargo_Dispatcher.lua' )
 __Moose.Include( 'Tasking\\Task_Capture_Zone.lua' )
 __Moose.Include( 'Tasking\\Task_Capture_Dispatcher.lua' )
 
-__Moose.Include( 'Navigation\\Point.lua' )
-__Moose.Include( 'Navigation\\Beacons.lua' )
-__Moose.Include( 'Navigation\\Radios.lua' )
-__Moose.Include( 'Navigation\\Towns.lua' )
-
 __Moose.Include( 'Globals.lua' )

Moose Development/Moose/Navigation/Beacons.lua

@@ -1,395 +0,0 @@
---- **NAVIGATION** - Beacons of the map/theatre.
---
--- **Main Features:**
---
---    * Access beacons of the map
---    * Find closest beacon
---    * Get frequencies and channels
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20Beacons).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Beacons
--- @image NAVIGATION_Beacons.png
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- BEACONS class.
--- @type BEACONS
--- 
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #table beacons Beacons.
--- 
--- @extends Core.Base#BASE
-
---- *Hope is the beacon that guides lost ships back to the shore.*
---
--- ===
---
--- # The BEACONS Concept
---
--- This class is desinged to make information about beacons of a map/theatre easier accessible. The information contains location, type and frequencies of all or specific beacons of the map.
--- 
--- **Note** that try to avoid hard coding stuff in Moose since DCS is updated frequently and things change. Therefore, the main source of information is either a file `beacons.lua` that can be
--- found in the installation directory of DCS for each map or a table that the user needs to provide.
--- 
--- # Basic Setup
--- 
--- A new `BEACONS` object can be created with the @{#BEACONS.NewFromFile}(*beacons_lua_file*) function.
--- 
---     local beacons=BEACONS:NewFromFile("<DCS_Install_Directory>\Mods\terrains\<Map_Name>\beacons.lua")
---     beacons:MarkerShow()
--- 
--- This will load the beacons from the `<DCS_Install_Directory>` for the specific map and place markers on the F10 map. This is the first step you should do to ensure that the file
--- you provided is correct and all relevant beacons are present.
--- 
--- # User Functions
--- 
--- ## F10 Map Markers
--- 
--- ## Position
--- 
--- ## Get Closest Beacon
--- 
---
--- @field #BEACONS
-BEACONS = {
-  ClassName  = "BEACONS",
-  verbose    =         1,
-  beacons    =        {},
-}
-
---- Mission capability.
--- @type BEACONS.Beacon
--- @field #function display_name Function that returns the localized name.
--- @field #number type Beacon type.
--- @field #string beaconId Beacon ID.
--- @field #string callsign Call sign.
--- @field #number frequency Frequency in Hz.
--- @field #number channel TACAN, RSBN or PRMG channel depending on type.
--- @field #table position Position table.
--- @field #number direction Direction in degrees.
--- @field #table positionGeo Table with latitude and longitude.
--- @field #table sceneObjects Table with scenery objects, e.g. `{t:393396742}`.
--- @field #number chartOffsetX No idea what this offset is?!
--- @field DCS#Vec3 vec3 Position vector 3D.
--- @field #number markerID ID for the F10 marker.
--- @field #string typeName Name of becon type.
--- @field Wrapper.Scenery#SCENERY scenery The scenery object.
-
---- BEACONS class version.
--- @field #string version
-BEACONS.version="0.0.4"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
--- DONE: TACAN channel from frequency (was already in beacon.lua as channel)
--- DONE: Scenery object
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor(s)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new BECAONS class instance from a given table.
--- @param #BEACONS self
--- @param #table BeaconTable Table with beacon info.
--- @return #BEACONS self
-function BEACONS:NewFromTable(BeaconTable)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #BEACONS
-  
-  for _,_beacon in pairs(BeaconTable) do
-    local beacon=_beacon --#BEACONS.Beacon
-    
-    -- Get 3D vector
-    beacon.vec3={x=beacon.position[1], y=beacon.position[2], z=beacon.position[3]}
-    
-    -- Get coordinate
-    beacon.coordinate=COORDINATE:NewFromVec3(beacon.vec3)
-    
-    -- Get type name
-    beacon.typeName=self:_GetTypeName(beacon.type)
-    
-    -- Find closest scenery object from scan
-    beacon.scenery=beacon.coordinate:FindClosestScenery(20)
-    
-    -- Debug stuff for scenery object
-    if false then
-      if beacon.scenery then
-        env.info(string.format("FF Beacon %s %s %s got scenery object %s, %s", beacon.callsign, beacon.beaconId, beacon.typeName, beacon.scenery:GetName(), beacon.scenery:GetTypeName() ))
-        UTILS.PrintTableToLog(beacon.scenery.SceneryObject)
-        UTILS.PrintTableToLog(beacon.sceneObjects)
-      else
-        env.info(string.format("FF NO scenery object  %s %s %s ", beacon.callsign, beacon.beaconId, beacon.typeName))
-      end
-    end
-    
-    -- Add to table
-    table.insert(self.beacons, beacon)
-  end
-  
-  -- Debug output
-  self:I(string.format("Added %d beacons", #self.beacons))
-  
-  if self.verbose > 0 then
-    local text="Beacon types:"
-    for typeName,typeID in pairs(BEACON.Type) do
-      local n=self:CountBeacons(typeID)
-      text=text..string.format("\n%s = %d", typeName, n)      
-    end
-    self:I(text)
-  end
-  
-  return self
-end
-
-
---- Create a new BECAONS class instance from a given file.
--- @param #BEACONS self
--- @param #string FileName Full path to the file containing the map beacons.
--- @return #BEACONS self
-function BEACONS:NewFromFile(FileName)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #BEACONS
-  
-  local exists=UTILS.FileExists(FileName)
-  
-  if exists==false then
-    self:E(string.format("ERROR: file with beacon info does not exist!"))
-    return nil
-  end
-
-  -- This will create a global table `beacons`  
-  dofile(FileName)
-
-  -- Get beacons from table.
-  self=self:NewFromTable(beacons)
-  
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get 3D position vector of a specific beacon.
--- @param #BEACONS self
--- @param #BEACONS.Beacon beacon The beacon data structure.
--- @return DCS#Vec3 Position vector.
-function BEACONS:GetVec3(beacon)
-  return beacon.vec3
-end
-
---- Get COORDINATE of a specific beacon.
--- @param #BEACONS self
--- @param #BEACONS.Beacon beacon The beacon data structure.
--- @return Core.Point#COORDINATE The coordinate.
-function BEACONS:GetCoordinate(beacon)
-  local coordinate=COORDINATE:NewFromVec3(beacon.vec3)
-  return coordinate
-end
-
---- Find closest beacon to a given coordinate.
--- @param #BEACONS self
--- @param Core.Point#COORDINATE Coordinate The reference coordinate.
--- @param #number TypeID (Optional) Only search for specific beacon types, *e.g.* `BEACON.Type.TACAN`.
--- @param #number DistMax (Optional) Max search distance in meters.
--- @param #table ExcludeList (Optional) List of beacons to exclude.
--- @return #BEACONS.Beacon The closest beacon.
-function BEACONS:GetClosestBeacon(Coordinate, TypeID, DistMax, ExcludeList)
-
-  local beacon=nil --#BEACONS.Beacon
-  local distmin=math.huge
-  
-  ExcludeList=ExcludeList or {}
-  
-  for _,_beacon in pairs(self.beacons) do
-    local bc=_beacon --#BEACONS.Beacon
-    
-    if (TypeID==nil or TypeID==bc.type) and (not UTILS.IsInTable(ExcludeList, bc, "beaconId")) then
-    
-      local dist=Coordinate:Get2DDistance(bc.vec3)
-      
-      if dist<distmin and (DistMax==nil or dist<=DistMax) then
-        distmin=dist
-        beacon=bc
-      end
-      
-    end
-    
-  end  
-  
-  return beacon
-end
-
---- Get table of all beacons, optionally of a given type.
--- @param #BEACONS self
--- @param #number TypeID (Optional) Only return specific beacon types, *e.g.* `BEACON.Type.TACAN`.
--- @return #table Table of beacons. Each element is of type #BEACON.Beacon.
-function BEACONS:GetBeacons(TypeID)
-  
-  local beacons={}
-  
-  for _,_beacon in pairs(self.beacons) do
-    local bc=_beacon --#BEACONS.Beacon
-    
-    if TypeID==nil or TypeID==bc.type then
-      table.insert(beacons, bc)
-    end
-    
-  end  
-
-  return beacons
-end
-
---- Count beacons, optionally of a given type.
--- @param #BEACONS self
--- @param #number TypeID (Optional) Only count specific beacon types, *e.g.* `BEACON.Type.TACAN`.
--- @return #number Number of beacons.
-function BEACONS:CountBeacons(TypeID)
-
-  local n=0
-  
-  if TypeID then
-    for _,_beacon in pairs(self.beacons) do
-      local bc=_beacon --#BEACONS.Beacon
-      
-      if TypeID==bc.type then
-        n=n+1
-      end 
-    end
-  else
-    n=#self.beacons
-  end
-
-  return n
-end
-
---- Add markers for all beacons on the F10 map. Optionally, only a specific beacon or a certain beacon type can be marked.
--- @param #BEACONS self
--- @param #BEACONS.Beacon Beacon (Optional) Only this specifc beacon.
--- @param #number TypeID (Optional) Only show specific beacon types, *e.g.* `BEACON.Type.TACAN`.
--- @return #BEACONS self
-function BEACONS:MarkerShow(Beacon, TypeID)
-
-  for _,_beacon in pairs(self.beacons) do
-    local beacon=_beacon --#BEACONS.Beacon
-    if Beacon==nil or Beacon.beaconId==beacon.beaconId then
-      if TypeID==nil or beacon.type==TypeID then
-        local text=self:_GetMarkerText(beacon)
-        local coord=COORDINATE:NewFromVec3(beacon.vec3)
-        if beacon.markerID then
-          UTILS.RemoveMark(beacon.markerID)
-        end
-        beacon.markerID=coord:MarkToAll(text)
-      end
-    end
-  end
-
-  return self
-end
-
---- Remove markers of all beacons from the F10 map. Optionally, remove only marker of a specific beacon or a certain beacon type.
--- @param #BEACONS self
--- @param #BEACONS.Beacon Beacon (Optional) Only this specifc beacon.
--- @param #number TypeID (Optional) Only show specific beacon types, *e.g.* `BEACON.Type.TACAN`.
--- @return #BEACONS self
-function BEACONS:MarkerRemove(Beacon, TypeID)
-
-  for _,_beacon in pairs(self.beacons) do
-    local beacon=_beacon --#BEACONS.Beacon
-    if Beacon==nil or Beacon.beaconId==beacon.beaconId then    
-      if TypeID==nil or beacon.type==TypeID then    
-        if beacon.markerID then
-          UTILS.RemoveMark(beacon.markerID)
-          beacon.markerID=nil
-        end
-      end
-    end
-  end
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get text displayed in the F10 marker.
--- @param #BEACONS self
--- @param #BEACONS.Beacon beacon The beacon data structure.
--- @return #string Marker text.
-function BEACONS:_GetMarkerText(beacon)
-
-  local frequency, funit=self:_GetFrequency(beacon.frequency)
-  local direction=beacon.direction~=nil and beacon.direction or -1
-
-  local text=string.format("Beacon %s [ID=%s]", tostring(beacon.typeName), tostring(beacon.beaconId))  
-  text=text..string.format("\nCallsign: %s", tostring(beacon.callsign))
-  if UTILS.IsInTable({BEACON.Type.TACAN, BEACON.Type.RSBN, BEACON.Type.PRMG_GLIDESLOPE, BEACON.Type.PRMG_LOCALIZER}, beacon.type) then
-    text=text..string.format("\nChannel: %s", tostring(beacon.channel))
-  end
-  text=text..string.format("\nFrequency: %.3f %s", frequency, funit)
-  text=text..string.format("\nDirection: %.1f°", direction)
-  
-  return text
-end
-
-
---- Get converted frequency.
--- @param #BEACONS self
--- @param #number freq Frequency in Hz.
--- @return #number Frequency in better unit.
--- @return #string Unit ("Hz", "kHz", "MHz").
-function BEACONS:_GetFrequency(freq)
-
-  freq=freq or 0
-  local unit="Hz"
-  
-  if freq>=1e6 then
-    freq=freq/1e6
-    unit="MHz"
-  elseif freq>=1e3 then
-    freq=freq/1e3
-    unit="kHz"
-  end
-
-  return freq, unit
-end
-
---- Get name of beacon type.
--- @param #BEACONS self
--- @param #number typeID Beacon type number.
--- @return #string Type name.
-function BEACONS:_GetTypeName(typeID)
-
-  if typeID~=nil then  
-    for typeName,_typeID in pairs(BEACON.Type) do
-      if _typeID==typeID then
-        return typeName
-      end  
-    end
-  end
-
-  return "Unknown"
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Navigation/FlightPlan.lua

@@ -1,481 +0,0 @@
---- **NAVIGATION** - Flight Plan.
---
--- **Main Features:**
---
---    * Manage navigation aids
---    * VOR, NDB
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Ops%20-%20FlightPlan).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.FlightPlan
--- @image NAVIGATION_FlightPlan.png
-
-
---- FLIGHTPLAN class.
--- @type FLIGHTPLAN
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #table fixes Navigation fixes.
--- @field Core.Pathline#PATHLINE pathline Pathline of the plan.
--- @field Wrapper.Airbase#AIRBASE departureAirbase Departure airbase.
--- @field Wrapper.Airbase#AIRBASE destinationAirbase Destination airbase.
--- @field #number altitudeCruiseMin Minimum cruise altitude in feet MSL.
--- @field #number altitudeCruiseMax Maximum cruise altitude in feet MSL.
--- @extends Core.Pathline#PATHLINE
-
---- *Life is what happens to us while we are making other plans.* -- Allen Saunders
---
--- ===
---
--- # The FLIGHTPLAN Concept
---
--- This class has a great concept!
--- 
--- # Basic Setup
--- 
--- A new `FLIGHTPLAN` object can be created with the @{#FLIGHTPLAN.New}() function.
--- 
---     myFlightplan=FLIGHTPLAN:New("Plan A")
---     myFleet:SetPortZone(ZonePort1stFleet)
---     myFleet:Start()
---     
--- A fleet needs a *port zone*, which is set via the @{#FLIGHTPLAN.SetPortZone}(`PortZone`) function. This is the zone where the naval assets are spawned and return to.
--- 
--- Finally, the fleet needs to be started using the @{#FLIGHTPLAN.Start}() function. If the fleet is not started, it will not process any requests.
---
--- @field #FLIGHTPLAN
-FLIGHTPLAN = {
-  ClassName       = "FLIGHTPLAN",
-  verbose         =       0,
-  fixes           = {}
-}
-
---- Type of  flightplan.
--- @type FLIGHTPLAN.Type
--- @field #string IFRH Instrument Flying Rules High Altitude.
--- @field #string IFRL Instrument Flying Rules Low Altitude.
--- @field #string VFR Visual Flight Rules.
-FLIGHTPLAN.Type={
-  IFRH = "IFR High",
-  IFRL = "IFR Low",
-  VFR  = "VFR",
-}
-
-
-  
---- FLIGHTPLAN class version.
--- @field #string version
-FLIGHTPLAN.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: How to connect SID, STAR, ENROUTE, TRANSITION, APPROACH. Typical flightplan SID --> ENROUTE --> STAR --> APPROACH
--- TODO: Add approach.
--- DONE: How to handle the FLIGHTGROUP:_LandAtAirBase
--- TODO: Do we always need a holding pattern? https://www.faa.gov/air_traffic/publications/atpubs/aip_html/part2_enr_section_1.5.html#:~:text=If%20no%20holding%20pattern%20is,than%20that%20desired%20by%20ATC.
--- DOEN: Read from MSFS file.
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new FLIGHTPLAN instance.
--- @param #FLIGHTPLAN self
--- @param #string Name Name of this flight plan.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:New(Name)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, PATHLINE:New(Name)) -- #FLIGHTPLAN
-
-  -- Set alias.
-  self.alias=tostring(Name)
-  
-  -- Set some string id for output to DCS.log file.
-  self.lid=string.format("FLIGHTPLAN %s | ", self.alias)
-  
-  --self.pathline=PATHLINE:New(Name)
-  
-  -- Debug info.
-  self:I(self.lid..string.format("Created FLIGHTPLAN!"))
-
-  return self
-end
-
---- Create a new FLIGHTPLAN instance from another FLIGHTPLAN acting as blue print.
--- The newly created flight plan is deep copied from the given one.
--- @param #FLIGHTPLAN self
--- @param #FLIGHTPLAN FlightPlan Blue print of the flight plan to copy.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:NewFromFlightPlan(FlightPlan)
-  self=UTILS.DeepCopy(FlightPlan)
-  return self
-end
-
-
---- Create a new FLIGHTPLAN instance from a given file.
--- Currently, the file has to be an MSFS 2020 .pln file as, *e.g.*, exported from [Navigraph](https://navigraph.com/).
--- 
--- **Note** that the flight plan does only cover the departure, enroute and arrival portions but **not the approach** part!
--- @param #FLIGHTPLAN self
--- @param #string FileName Full path to file.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:NewFromFile(FileName)
-
-  if UTILS.FileExists(FileName) then
-  
-    self=FLIGHTPLAN._ReadFileMSFS(FileName)  
-  
-  else
-    error(string.format("ERROR: File not found! File name=%s", tostring(FileName)))  
-  end
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Add navigation fix to the flight plan.
--- @param #FLIGHTPLAN self
--- @param Navigation.Point#NAVPOINT NavFix The nav fix.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:AddNavFix(NavFix)
-
-  table.insert(self.fixes, NavFix)
-  
-  local point=self:AddPointFromVec3(NavFix.vector:GetVec3(true))
-  
-  point.navpoint=NavFix
-
-  return self
-end
-
-
---- Set departure airbase.
--- @param #FLIGHTPLAN self
--- @param #string AirbaseName Name of the airbase or AIRBASE object.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:SetDepartureAirbase(AirbaseName)
-
-  self.departureAirbase=AIRBASE:FindByName(AirbaseName)
- 
-  return self
-end
-
---- Set destination airbase.
--- @param #FLIGHTPLAN self
--- @param #string AirbaseName Name of the airbase or AIRBASE object.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:SetDestinationAirbase(AirbaseName)
-
-  self.destinationAirbase=AIRBASE:FindByName(AirbaseName)
-
-  return self
-end
-
-
---- Set cruise altitude.
--- @param #FLIGHTPLAN self
--- @param #number AltMin Minimum altitude in feet MSL.
--- @param #number AltMax Maximum altitude in feet MSL. Default is `AltMin`.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:SetCruiseAltitude(AltMin, AltMax)
-
-  self.altitudeCruiseMin=AltMin
-  self.altitudeCruiseMax=AltMax or self.altitudeCruiseMin
-
-  return self
-end
-
---- Set cruise speed.
--- @param #FLIGHTPLAN self
--- @param #number SpeedMin Minimum speed in knots.
--- @param #number SpeedMax Maximum speed in knots. Default is `SpeedMin`.
--- @return #FLIGHTPLAN self
-function FLIGHTPLAN:SetCruiseSpeed(SpeedMin, SpeedMax)
-
-  self.speedCruiseMin=SpeedMin
-  self.speedCruiseMax=SpeedMax or self.speedCruiseMin
-
-  return self
-end
-
-
---- Get the name of this flight plan.
--- @param #FLIGHTPLAN self
--- @return #string The name.
-function FLIGHTPLAN:GetName()
-  return self.alias
-end
-
-
---- Get cruise altitude. This returns a random altitude between the set min/max cruise altitudes.
--- @param #FLIGHTPLAN self
--- @return #number Cruise altitude in feet MSL.
-function FLIGHTPLAN:GetCruiseAltitude()
-
-  local alt=10000
-  if self.altitudeCruiseMin and self.altitudeCruiseMax then
-    alt=math.random(self.altitudeCruiseMin, self.altitudeCruiseMax)
-  elseif self.altitudeCruiseMin then
-    alt=self.altitudeCruiseMin
-  elseif self.altitudeCruiseMax then
-    alt=self.altitudeCruiseMax
-  end
-  
-  return alt
-end
-
---- Get cruise speed. This returns a random speed between the set min/max cruise speeds.
--- @param #FLIGHTPLAN self
--- @return #number Cruise speed in knots.
-function FLIGHTPLAN:GetCruiseSpeed()
-
-  local speed=250
-  
-  if self.speedCruiseMin and self.speedCruiseMax then
-    speed=math.random(self.speedCruiseMin, self.speedCruiseMax)
-  elseif self.speedCruiseMin then
-    speed=self.speedCruiseMin
-  elseif self.altitudeCruiseMax then
-    speed=self.speedCruiseMax
-  end
-  
-  return speed
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Read flight plan from a given MSFS 2020 .plt file.
--- @param #string FileName Name of the file.
--- @return #FLIGHTPLAN The flight plan.
-function FLIGHTPLAN._ReadFileMSFS(FileName)
-
-  local function readfile(filename)
-
-    local lines = {}
-    
-    -- Open file in read binary mode.
-    local file=assert(io.open(filename, "rb"), string.format("File not found! File name = %s", tostring(filename)))
-
-    for line in file:lines() do
-        lines[#lines+1] = line
-    end
-    
-    -- Close file.
-    file:close()
-  
-    -- Return data
-    return lines
-  end
-
-
-  --- This function returns an XML element, i.e. the string between <...> and </...>.
-  local function getXMLelement(line)
-    local element=string.match(line, ">(.+)<")
-    return element
-  end
-
-  --- This function returns Latitude and Longitude
-  local function getLatLong(line)
-    local latlong=getXMLelement(line)
-    -- The format is "N41° 38' 20.00",E41° 33' 19.00",+000000.00" so we still need to process that.
-    local lat,long=string.match(latlong, "(.+),(.+),")
-    return lat,long
-  end
-  
-  -- Read data from file.
-  local data=readfile(FileName)
-
-  local flightplan={}
-  local waypoints={}
-  local wp=nil
-  
-  local gotwaypoint=false
-  for i,line in pairs(data) do
-  
-  
-    --print(line)
-  
-    -- Title  
-    if string.find(line, "<Title>") then
-      flightplan.title=getXMLelement(line)
-    end
-  
-    -- Departure ICAO
-    if string.find(line, "<DepartureID>") then
-      flightplan.departureICAO=getXMLelement(line)
-    end
-  
-    -- Destination ICAO
-    if string.find(line, "<DestinationID>") then
-      flightplan.destinationICAO=getXMLelement(line)
-    end
-  
-    -- FPType  
-    if string.find(line, "<FPType>") then
-      flightplan.plantype=getXMLelement(line)
-    end
-    
-    -- Route type  
-    if string.find(line, "<RouteType>") then
-      flightplan.routetype=getXMLelement(line)
-    end
-  
-    -- Cruise alt in feet
-    if string.find(line, "<CruisingAlt>") then
-      flightplan.altCruise=getXMLelement(line)
-    end
-  
-    -- Departure LLA
-    if string.find(line, "<DepartureLLA>") then
-      local lat,long=getLatLong(line)    
-    end
-    
-    -- Destination LLA
-    if string.find(line, "<DestinationLLA>") then
-      local lat,long=getLatLong(line)    
-    end  
-  
-    -- Departure Name
-    if string.find(line, "<DepartureName>") then
-      local DepartureName=getXMLelement(line)
-    end
-      
-    -- DestinationName
-    if string.find(line, "<DestinationName>") then
-      local DestinationName=getXMLelement(line)
-    end
-      
-    ---
-    -- Waypoint stuff
-    ---
-  
-    -- New waypoint starts.
-    if string.find(line, "ATCWaypoint id") then
-    
-      --Get string inside quotes " and ". 
-      local wpid=string.match(line, [["(.+)"]]) 
-      
-      -- Create a new wp table.
-      wp={}
-      
-      -- Set waypoint name.
-      wp.name=wpid
-    end
-    
-    -- Waypoint info ends.
-    if string.find(line, "</ATCWaypoint>") then
-      -- This is the end of the waypoint.
-      
-      -- Add info to waypoints table.
-      table.insert(waypoints, wp)
-      
-      -- Set waypoint to nil. We create an empty table if the next wp starts.
-      wp=nil
-    end
-    
-    -- Waypoint type (Airport, Intersection, NDB, VORTAC)
-    if string.find(line, "<ATCWaypointType>") then
-      local wptype=getXMLelement(line)
-      wp.type=wptype
-    end
-    
-    -- Waypoint position.
-    if string.find(line, "<WorldPosition>") then
-      wp.lat, wp.long=getLatLong(line)
-    end
-    
-    -- Runway should exist for initial and final WP if it is an airport.
-    if string.find(line, "RunwayNumberFP") then
-      wp.runway=getXMLelement(line)
-    end
-    
-    -- Runway designator: LEFT, RIGHT, CENTER
-    if string.find(line, "RunwayDesignatorFP") then 
-      wp.runwayDesignator=getXMLelement(line)
-    end  
-    
-    -- Segment is Departure
-    if string.find(line, "<DepartureFP>") then
-      wp.segment="Departure"
-    end
-    
-    -- Segment is Arrival
-    if string.find(line, "<ArrivalFP>") then
-      wp.segment="Arrival"
-    end
-    
-    -- Segment is Enroute
-    if string.find(line, "<ATCAirway>") then
-      wp.segment="Enroute"
-    end
-  
-    -- Approach type: VORDME, LOCALIZER
-    if string.find(line, "ApproachTypeFP") then
-      flightplan.approachtype=getXMLelement(line)
-    end
-  
-    -- Approach type suffic: Z
-    if string.find(line, "SuffixFP") then
-      local SuffixFP=getXMLelement(line)
-    end
-    
-  end
-    
-  for key, value in pairs(flightplan) do
-    env.info(string.format("Flightplan %s=%s", key, tostring(value)))
-  end
-
-  env.info(string.format("Number of waypoints=%d", #waypoints))  
-  for i,wp in pairs(waypoints) do
-    env.info(string.format("Waypoint name=%s type=%s segment=%s runway=%s lat=%s long=%s", wp.name, wp.type, tostring(wp.segment), tostring(wp.runway)..tostring(wp.runwayDesignator or ""), wp.lat, wp.long))
-  end
-  
-  -- Create a new flightplan.
-  local fp=FLIGHTPLAN:New(flightplan.title)
-  
-  -- Set cruise altitude.
-  fp:SetCruiseAltitude(flightplan.altCruise)
-  
-  -- Set departure and destination airports.
-  fp:SetDepartureAirbase(flightplan.departureICAO)
-  fp:SetDestinationAirbase(flightplan.destinationICAO)
-  
-  --TODO: Remove first and last waypoint if they are identical to the departure/destination airport!
-  
-  for i,wp in pairs(waypoints) do
-      
-    -- Create a navpoint.
-    local navpoint=NAVPOINT:NewFromLLDMS(wp.name, wp.type, wp.lat, wp.long)
-    
-    navpoint:SetAltMin(flightplan.altCruise)
-  
-    -- Add point to flightplan.
-    -- TODO: section departure, enroute, arrival.
-    fp:AddNavFix(navpoint)  
-  end
-
-  
-
-  return fp
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Navigation/Point.lua

@@ -1,587 +0,0 @@
---- **NAVIGATION** - Navigation Airspace Points, Fixes and Aids.
---
--- **Main Features:**
---
---    * Stuff
---    * More Stuff
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20NavFix).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Point
--- @image NAVIGATION_Point.png
-
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- NAVFIX class.
--- @type NAVFIX
--- 
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #string name Name of the point.
--- @field #string typePoint Type of the point, *e.g. "Intersection", "VOR", "Airport".
--- @field Core.Vector#VECTOR vector Position vector of the fix.
--- @field Wrapper.Marker#MARKER marker Marker on F10 map.
--- @field #number altMin Minimum altitude in meters.
--- @field #number altMax Maximum altitude in meters.
--- @field #number speedMin Minimum speed in knots.
--- @field #number speedMax Maximum speed in knots.
--- 
--- @field #boolean isCompulsory Is this a compulsory fix.
--- @field #boolean isFlyover Is this a flyover fix (`true`) or turning point otherwise.
--- @field #boolean isFAF Is this a final approach fix.
--- @field #boolean isIAF Is this an initial approach fix.
--- @field #boolean isIF Is this an initial fix.
--- @field #boolean isMAF Is this an initial fix.
--- 
--- @extends Core.Base#BASE
-
---- *A fleet of British ships at war are the best negotiators.* -- Horatio Nelson
---
--- ===
---
--- # The NAVFIX Concept
---
--- The NAVFIX class has a great concept!
--- 
--- A NAVFIX describes a geo position and can, *e.g.*, be part of a FLIGHTPLAN. It has a unique name and is of a certain type, *e.g.* "Intersection", "VOR", "Airbase" etc.
--- It can also have further properties as min/max altitudes and speeds that aircraft need to obey when they pass the point.
--- 
--- # Basic Setup
--- 
--- A new `NAVFIX` object can be created with the @{#NAVFIX.New}() function.
--- 
---     myNavPoint=NAVFIX:New()
---     myTemplate:SetXYZ(X, Y, Z)
---     
--- This is how it works.
---
--- @field #NAVFIX
-NAVFIX = {
-  ClassName       = "NAVFIX",
-  verbose         =          0,
-}
-
---- Type of point.
--- @type NAVFIX.Type
--- @field #string POINT Waypoint.
--- @field #string INTERSECTION Intersection of airway.
--- @field #string AIRPORT Airport.
--- @field #string VOR Very High Frequency Omnidirectional Range Station.
--- @field #string DME Distance Measuring Equipment.
--- @field #string NDB Non-Directional Beacon.
--- @field #string VORDME Combined VHF omnidirectional range (VOR) with a distance-measuring equipment (DME).
--- @field #string LOC Localizer.
--- @field #string ILS Instrument Landing System.
--- @field #string TACAN TACtical Air Navigation System (TACAN).
-NAVFIX.Type={
-  POINT="Point",
-  INTERSECTION="Intersection",
-  AIRPORT="Airport",
-  NDB="NDB",
-  VOR="VOR",
-  DME="DME",
-  VORDME="VOR/DME",
-  LOC="Localizer",
-  ILS="ILS",
-  TACAN="TACAN"
-}
-
---- NAVFIX class version.
--- @field #string version
-NAVFIX.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor(s)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new NAVFIX class instance from a given VECTOR.
--- @param #NAVFIX self
--- @param #string Name Name/ident of the point. Should be unique!
--- @param #string Type Type of the point. Default `NAVFIX.Type.POINT`.
--- @param Core.Vector#VECTOR Vector Position vector of the navpoint.
--- @return #NAVFIX self
-function NAVFIX:NewFromVector(Name, Type, Vector)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #NAVFIX
-  
-  -- Vector of point.
-  self.vector=Vector
-  
-  -- Name of point.
-  self.name=Name
-  
-  -- Type of the point.
-  self.typePoint=Type or NAVFIX.Type.POINT
-  
-  local coord=COORDINATE:NewFromVec3(self.vector)
-  
-  -- Marker on F10.
-  self.marker=MARKER:New(coord, self:_GetMarkerText())
-  
-  -- Log ID string.
-  self.lid=string.format("NAVFIX %s [%s] | ", tostring(self.name), tostring(self.typePoint))
-  
-  -- Debug info.
-  self:I(self.lid..string.format("Created NAVFIX"))
-
-  return self
-end
-
-
---- Create a new NAVFIX class instance from a given COORDINATE.
--- @param #NAVFIX self
--- @param #string Name Name of the fix. Should be unique!
--- @param #string Type Type of the point. Default `NAVFIX.Type.POINT`.
--- @param Core.Point#COORDINATE Coordinate Coordinate of the point.
--- @return #NAVFIX self
-function NAVFIX:NewFromCoordinate(Name, Type, Coordinate)
-
-  -- Create a VECTOR from the coordinate.
-  local Vector=VECTOR:NewFromVec(Coordinate)
-  
-  -- Create NAVFIX.
-  self=NAVFIX:NewFromVector(Name, Type, Vector)
-  
-  return self
-end
-
-
---- Create a new NAVFIX instance from given latitude and longitude in degrees, minutes and seconds (DMS).
--- @param #NAVFIX self
--- @param #string Name Name of the fix. Should be unique!
--- @param #string Type Type of the point. Default `NAVFIX.Type.POINT`.
--- @param #string Latitude Latitude in DMS as string.
--- @param #string Longitude Longitude in DMS as string.
--- @return #NAVFIX self
-function NAVFIX:NewFromLLDMS(Name, Type, Latitude, Longitude)
-
-  -- Create a VECTOR from the coordinate.
-  local Vector=VECTOR:NewFromLLDMS(Latitude, Longitude)
-
-  -- Create NAVFIX.
-  self=NAVFIX:NewFromVector(Name, Type, Vector)
-  
-  return self  
-end
-
---- Create a new NAVFIX instance from given latitude and longitude in decimal degrees (DD).
--- @param #NAVFIX self
--- @param #string Name Name of the fix. Should be unique!
--- @param #string Type Type of the point. Default `NAVFIX.Type.POINT`.
--- @param #number Latitude Latitude in DD.
--- @param #number Longitude Longitude in DD.
--- @return #NAVFIX self
-function NAVFIX:NewFromLLDD(Name, Type, Latitude, Longitude)
-
-  -- Create a VECTOR from the coordinate.
-  local Vector=VECTOR:NewFromLLDD(Latitude, Longitude)
-
-  -- Create NAVFIX.
-  self=NAVFIX:NewFromVector(Name, Type, Vector)
-  
-  return self  
-end
-
-
---- Create a new NAVFIX class instance relative to a given other NAVFIX.
--- You have to specify the distance and bearing from the new point to the given point. *E.g.*, for a distance of 5 NM and a bearing of 090° (West), the
--- new nav point is created 5 NM East of the given nav point. The reason is that this corresponts to convention used in most maps.
--- You can, however, use the `Reciprocal` switch to create the new point in the direction you specify.
--- @param #NAVFIX self
--- @param #string Name Name of the fix. Should be unique!
--- @param #string Type Type of navfix.
--- @param #NAVFIX NavFix The given/existing navigation fix relative to which the new fix is created.
--- @param #number Distance Distance from the given to the new point in nautical miles.
--- @param #number Bearing Bearing [Deg] from the new point to the given one.
--- @param #boolean Reciprocal If `true` the reciprocal `Bearing` is taken so it specifies the direction from the given point to the new one. 
--- @return #NAVFIX self
-function NAVFIX:NewFromNavFix(Name, Type, NavFix, Distance, Bearing, Reciprocal)
-
-  -- Convert magnetic to true bearing by adding magnetic declination, e.g. mag. bearing 10°M ==> true bearing 16°M (for 6° variation on Caucasus map)
-  Bearing=Bearing+UTILS.GetMagneticDeclination()
-
-  if Reciprocal then
-    Bearing=Bearing-180
-  end
-  
-  -- Translate.
-  local Vector=NavFix.vector:Translate(UTILS.NMToMeters(Distance), Bearing, true)
-  
-  self=NAVFIX:NewFromVector(Name, Type, Vector)
-  
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Set whether this is the intermediate fix (IF).
--- @param #NAVFIX self
--- @return #NAVFIX self
-function NAVFIX:SetIntermediateFix(IntermediateFix)
-  self.isIF=IntermediateFix
-  return self
-end
-
---- Set whether this is an initial approach fix (IAF).
--- The IAF is the point where the initial approach segment of an instrument approach begins.
--- It is usually a designated intersection, VHF omidirectional range (VOR) non-directional beacon (NDB)
--- or distance measuring equipment (DME) fix.
--- The IAF may be collocated with the intermediate fix (IF) of the instrument apprach an in such case they designate the
--- beginning of the intermediate segment of the approach. When the IAF and the IF are combined, there is no inital approach segment.
--- @param #NAVFIX self
--- @param #boolean IntermediateFix If `true`, this is an intermediate fix.
--- @return #NAVFIX self
-function NAVFIX:SetInitialApproachFix(IntermediateFix)
-  self.isIAF=IntermediateFix
-  return self
-end
-
-
---- Set whether this is the final approach fix (FAF).
--- @param #NAVFIX self
--- @param #boolean FinalApproachFix If `true`, this is a final approach fix.
--- @return #NAVFIX self
-function NAVFIX:SetFinalApproachFix(FinalApproachFix)
-  self.isFAF=FinalApproachFix
-  return self
-end
-
---- Set whether this is the final approach fix (FAF).
--- @param #NAVFIX self
--- @param #boolean FinalApproachFix If `true`, this is a final approach fix.
--- @return #NAVFIX self
-function NAVFIX:SetMissedApproachFix(MissedApproachFix)
-  self.isMAF=MissedApproachFix
-  return self
-end
-
-
---- Set minimum altitude.
--- @param #NAVFIX self
--- @param #number Altitude Min altitude in feet.
--- @return #NAVFIX self
-function NAVFIX:SetAltMin(Altitude)
-
-  self.altMin=Altitude
-
-  return self
-end
-
---- Set maximum altitude.
--- @param #NAVFIX self
--- @param #number Altitude Max altitude in feet.
--- @return #NAVFIX self
-function NAVFIX:SetAltMax(Altitude)
-
-  self.altMax=Altitude
-
-  return self
-end
-
---- Set mandatory altitude (min alt = max alt).
--- @param #NAVFIX self
--- @param #number Altitude Altitude in feet.
--- @return #NAVFIX self
-function NAVFIX:SetAltMandatory(Altitude)
-
-  self.altMin=Altitude
-  self.altMax=Altitude
-
-  return self
-end
-
---- Set minimum allowed speed at this fix.
--- @param #NAVFIX self
--- @param #number Speed Min speed in knots.
--- @return #NAVFIX self
-function NAVFIX:SetSpeedMin(Speed)
-
-  self.speedMin=Speed
-
-  return self
-end
-
---- Set maximum allowed speed at this fix.
--- @param #NAVFIX self
--- @param #number Speed Max speed in knots.
--- @return #NAVFIX self
-function NAVFIX:SetSpeedMax(Speed)
-
-  self.speedMax=Speed
-
-  return self
-end
-
---- Set mandatory speed (min speed = max speed) at this fix.
--- @param #NAVFIX self
--- @param #number Speed Mandatory speed in knots.
--- @return #NAVFIX self
-function NAVFIX:SetSpeedMandatory(Speed)
-
-  self.speedMin=Speed
-  self.speedMax=Speed
-
-  return self
-end
-
-
---- Set whether this fix is compulsory.
--- @param #NAVFIX self
--- @param #boolean Compulsory If `true`, this is a compusory fix. If `false` or nil, it is non-compulsory.
--- @return #NAVFIX self
-function NAVFIX:SetCompulsory(Compulsory)
-  self.isCompulsory=Compulsory
-  return self
-end
-
---- Set whether this is a fly-over fix fix.
--- @param #NAVFIX self
--- @param #boolean FlyOver If `true`, this is a fly over fix. If `false` or nil, it is not.
--- @return #NAVFIX self
-function NAVFIX:SetFlyOver(FlyOver)
-  self.isFlyover=FlyOver
-  return self
-end
-
-
---- Get the altitude in feet MSL. If min and max altitudes are set, it will return a random altitude between min and max.
--- @param #NAVFIX self
--- @return #number Altitude in feet MSL. Can be `nil`, if neither min nor max altitudes have beeen set. 
-function NAVFIX:GetAltitude()
-
-  local alt=nil
-  if self.altMin and self.altMax and self.altMin~=self.altMax then
-    alt=math.random(self.altMin, self.altMax)
-  elseif self.altMin then
-    alt=self.altMin
-  elseif self.altMax then
-    alt=self.altMax
-  end
-
-  return alt
-end
-
-
---- Get the speed. If min and max speeds are set, it will return a random speed between min and max.
--- @param #NAVFIX self
--- @return #number Speed in knots. Can be `nil`, if neither min nor max speeds have beeen set. 
-function NAVFIX:GetSpeed()
-
-  local speed=nil
-  if self.speedMin and self.speedMax and self.speedMin~=self.speedMax then
-    speed=math.random(self.speedMin, self.speedMax)
-  elseif self.speedMin then
-    speed=self.speedMin
-  elseif self.speedMax then
-    speed=self.speedMax
-  end
-
-  return speed
-end
-
-
-
---- Add marker the NAVFIX on the F10 map.
--- @param #NAVFIX self
--- @return #NAVFIX self
-function NAVFIX:MarkerShow()
-
-  self.marker:ToAll()
-
-  return self
-end
-
---- Remove marker of the NAVFIX from the F10 map.
--- @param #NAVFIX self
--- @return #NAVFIX self
-function NAVFIX:MarkerRemove()
-
-  self.marker:Remove()
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get text displayed in the F10 marker.
--- @param #NAVFIX self
--- @return #string Marker text.
-function NAVFIX:_GetMarkerText()
-
-  local altmin=self.altMin and tostring(self.altMin) or ""
-  local altmax=self.altMax and tostring(self.altMax) or ""
-  local speedmin=self.speedMin and tostring(self.speedMin) or ""
-  local speedmax=self.speedMax and tostring(self.speedMax) or ""
-
-
-  local text=string.format("NAVFIX %s", self.name)
-  if self.isIAF then
-    text=text..string.format(" (IAF)")
-  end
-  if self.isIF then
-    text=text..string.format(" (IF)")
-  end
-  text=text..string.format("\nAltitude [ft]: %s - %s", altmin, altmax)
-  text=text..string.format("\nSpeed [knots]: %s - %s", speedmin, speedmax)
-  text=text..string.format("\nCompulsory: %s", tostring(self.isCompulsory))
-  text=text..string.format("\nFly Over: %s", tostring(self.isFlyover))
-  
-  return text
-end
-
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- NAVAID class.
--- @type NAVAID
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @extends Navigation.Point#NAVFIX
-
---- *A fleet of British ships at war are the best negotiators.* -- Horatio Nelson
---
--- ===
---
--- # The NAVAID Concept
---
--- A NAVAID consists of one or multiple FLOTILLAs. These flotillas "live" in a WAREHOUSE that has a phyiscal struction (STATIC or UNIT) and can be captured or destroyed.
--- 
--- # Basic Setup
--- 
--- A new `NAVAID` object can be created with the @{#NAVAID.New}(`WarehouseName`, `FleetName`) function, where `WarehouseName` is the name of the static or unit object hosting the fleet
--- and `FleetName` is the name you want to give the fleet. This must be *unique*!
--- 
---     myFleet=NAVAID:New("myWarehouseName", "1st Fleet")
---     myFleet:SetPortZone(ZonePort1stFleet)
---     myFleet:Start()
---     
--- A fleet needs a *port zone*, which is set via the @{#NAVAID.SetPortZone}(`PortZone`) function. This is the zone where the naval assets are spawned and return to.
--- 
--- Finally, the fleet needs to be started using the @{#NAVAID.Start}() function. If the fleet is not started, it will not process any requests.
---
--- @field #NAVAID
-NAVAID = {
-  ClassName       = "NAVAID",
-  verbose         =       0,
-}
-  
---- NAVAID class version.
--- @field #string version
-NAVAID.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: Add frequencies. Which unit MHz, kHz, Hz?
--- TODO: Add radial function
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new NAVAID class instance.
--- @param #NAVAID self
--- @param #string Name Name/ident of this navaid.
--- @param #string Type Type of the point. Default `NAVFIX.Type.POINT`.
--- @param #string ZoneName Name of the zone to scan the scenery.
--- @param #string SceneryName Name of the scenery object.
--- @return #NAVAID self
-function NAVAID:NewFromScenery(Name, Type, ZoneName, SceneryName)
-
-  -- Get the zone.
-  local zone=ZONE:FindByName(ZoneName)
-  
-  -- Get coordinate.
-  local Coordinate=zone:GetCoordinate()
-
-  -- Inherit everything from NAVFIX class.
-  self=BASE:Inherit(self, NAVFIX:NewFromCoordinate(Name, Type, Coordinate)) -- #NAVAID
-
-  -- Set zone.
-  self.zone=ZONE:FindByName(ZoneName)
-
-  -- Try to get the scenery object. Note not all can be found unfortunately.
-  if SceneryName then
-    self.scenery=SCENERY:FindByNameInZone(SceneryName, ZoneName)
-    if not self.scenery then
-      self:E(string.format("ERROR: Could not find scenery object %s in zone %s", SceneryName, ZoneName))
-    end
-  end
-  
-  -- Alias.  
-  self.alias=string.format("%s %s %s", tostring(ZoneName), tostring(SceneryName), tostring(Type))
-  
-  -- Set some string id for output to DCS.log file.
-  self.lid=string.format("NAVAID %s | ", self.alias)
-  
-  -- Debug info.
-  self:I(self.lid..string.format("Created NAVAID!"))
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Set frequency the beacon transmits on.
--- @param #NAVAID self
--- @param #number Frequency Frequency in Hz.
--- @return #NAVAID self
-function NAVAID:SetFrequency(Frequency)
-
-  self.frequency=Frequency
-
-  return self
-end
-
---- Set channel of, *e.g.*, TACAN beacons.
--- @param #NAVAID self
--- @param #number Channel The channel.
--- @param #string Band The band either `"X"` (default) or `"Y"`. 
--- @return #NAVAID self
-function NAVAID:SetChannel(Channel, Band)
-
-  self.channel=Channel
-  self.band=Band or "X"
-
-  return self
-end
-
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- Add private CLASS functions here.
--- No private NAVAID functions yet.
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Navigation/Procedure.lua

@@ -1,333 +0,0 @@
---- **NAVIGATION** - Prodedures for Departure (*e.g.* SID), Enroute, Arrival (*e.g.* STAR) and Approach.
---
--- **Main Features:**
---
---    * Stuff
---    * More Stuff
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20Template).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Procedure
--- @image NAVIGATION_Procedure.png
-
-
---- APPROACH class.
--- @type APPROACH
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #string apptype Approach type (ILS, VOR, LOC).
--- @field Wrapper.Airbase#AIRBASE airbase Airbase of this approach.
--- @field Wrapper.Airbase#AIRBASE.Runway runway Runway of this approach.
--- @field Navigation.Point#NAVAID navaid Primary navigation aid.
--- @field #number wpcounter Running number counting the waypoints to generate its UID.
--- @list <#APPROACH.Waypoint> path Path of approach consisting of waypoints.
--- @extends Core.Base#BASE
-
---- *A fleet of British ships at war are the best negotiators.* -- Horatio Nelson
---
--- ===
---
--- # The APPROACH Concept
--- 
--- A typical approach has (up to) four segments. It starts with the initial approach segment, followed by the intermediate approach segment, followed
--- by the final approach segment. In case something goes wrong during the final approach, the missed approach segment kicks in. 
--- 
--- The initial approach segment starts at the initial approach fix (IAF). The segment can contain multiple other fixes, that need to be passed.
--- Note, that an approach procedure can have more than one intitial approach segment and IAF.
--- 
--- The intermediate approach segment starts at the intermediate fix (IF). The intermediate approach segment blends the initial approach segment into the final approach segment. 
--- It is the segment in which aircraft configuration, speed, and positioning adjustments are made for entry into the final approach segment.
--- 
--- 
--- https://en.wikipedia.org/wiki/Visual_approach
--- https://en.wikipedia.org/wiki/Instrument_approach
--- 
--- # Basic Setup
--- 
--- A new `APPROACH` object can be created with the @{#APPROACH.New}() function.
--- 
---     myTemplate=APPROACH:New()
---     myTemplate:SetXYZ(X, Y, Z)
---     
--- This is how it works.
---
--- @field #APPROACH
-APPROACH = {
-  ClassName       = "APPROACH",
-  verbose         =       0,
-  wpcounter       =       0,
-}
-
---- Type of approach.
--- @type APPROACH.Type
--- @field #string VFR Visual Flight Rules.
--- @field #string VOR VOR
--- @field #string NDB NDB
-APPROACH.Type={
-  VFR="VFR",
-  VOR="VOR",
-  ILS="ILS",
-}
-
-
---- Setments of  approach.
--- @type APPROACH.Segment
--- @field #string INITIAL Initial approach segment.
--- @field #string INTERMEDIATE Intermediate approach segment.
--- @field #string FINAL Final approach segment.
--- @field #string MISSED Missed approach segment.
-APPROACH.Segment={
-  INITIAL="Initial",
-  INTERMEDIATE="Intermediate",
-  FINAL="Final",
-  MISSED="Missed",
-}
- 
---- Waypoint of the approach.
--- @type APPROACH.Waypoint
--- @field #number uid Unique ID of the point.
--- @field #string segment The segment this point belongs to.
--- @field Navigation.Point#NAVFIX navfix The navigation fix that determines the coordinates of this point.
-  
---- APPROACH class version.
--- @field #string version
-APPROACH.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
--- Initial approach segment --> Intermediate approach segment: starts at IF --> Final approach segment
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new APPROACH class instance.
--- @param #APPROACH self
--- @param #string Type Type of approach (ILS, VOR, LOC).
--- @param Wrapper.Airbase#AIRBASE Airbase The airbase or name of the airbase.
--- @param Wrapper.Airbase#AIRBASE.Runway Runway The runway or name of the runway.
--- @return #APPROACH self
-function APPROACH:New(Type, Airbase, Runway)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #APPROACH
-  
-  -- Set approach type.
-  -- TODO: Check if this is a valid/known approach type.
-  self.apptype=Type
-  
-  if type(Airbase)=="string" then
-    self.airbase=AIRBASE:FindByName(Airbase)
-  else
-    self.airbase=Airbase
-  end
-  
-  if type(Runway)=="string" then
-    self.runway=self.airbase:GetRunwayByName(Runway)
-  else
-    self.runway=Runway
-  end
-  
-  -- Debug info.
-  self:I("Created new approach for airbase %s: type=%s, runway=%s", self.airbase:GetName(), self.apptype, self.runway.name)
-  
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Set the primary navigation aid used in the approach.
--- @param #APPROACH self
--- @param Navigation.Point#NAVAID NavAid The NAVAID.
--- @return #APPROACH self
-function APPROACH:SetNavAid(NavAid)
-
-  self.navaid=NavAid
-
-  return self
-end
-
---- Add a waypoint to the path of the approach.
--- @param #APPROACH self
--- @param Navigation.Point#NAVFIX NavFix The navigation fix.
--- @param #string Segment The approach segment this fix belongs to.
--- @return #APPROACH.Waypoint The waypoint data table.
-function APPROACH:AddNavFix(NavFix, Segment)
-
-  self.wpcounter=self.wpcounter+1
-
-  local point={} --#APPROACH.Waypoint
-  point.uid=self.wpcounter
-  point.segment=Segment
-  point.navfix=NavFix
-
-  table.insert(self.path, point)
-
-  return point
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- Add private functions here.
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- DEPARTURE class.
--- @type DEPARTURE
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #string apptype DEPARTURE type (ILS, VOR, LOC).
--- @field Wrapper.Airbase#AIRBASE airbase Airbase of this DEPARTURE.
--- @field Wrapper.Airbase#AIRBASE.Runway runway Runway of this DEPARTURE.
--- @field Navigation.Point#NAVAID navaid Primary navigation aid.
--- @field #number wpcounter Running number counting the waypoints to generate its UID.
--- @list <#DEPARTURE.Waypoint> path Path of DEPARTURE consisting of waypoints.
--- @extends Core.Base#BASE
-
---- *A fleet of British ships at war are the best negotiators.* -- Horatio Nelson
---
--- ===
---
--- # The DEPARTURE Concept
--- 
--- Bla.
---
--- @field #DEPARTURE
-DEPARTURE = {
-  ClassName       = "DEPARTURE",
-  verbose         =       0,
-  wpcounter       =       0,
-}
-
---- Type of DEPARTURE.
--- @type DEPARTURE.Type
--- @field #string VOR VOR
--- @field #string NDB NDB
-DEPARTURE.Type={
-  VOR="VOR",
-  ILS="ILS",
-}
-
-
---- Setments of  DEPARTURE.
--- @type DEPARTURE.Segment
--- @field #string INITIAL Initial DEPARTURE segment.
--- @field #string INTERMEDIATE Intermediate DEPARTURE segment.
--- @field #string FINAL Final DEPARTURE segment.
--- @field #string MISSED Missed DEPARTURE segment.
-DEPARTURE.Segment={
-  INITIAL="Initial",
-  INTERMEDIATE="Intermediate",
-  FINAL="Final",
-  MISSED="Missed",
-}
- 
---- Waypoint of the DEPARTURE.
--- @type DEPARTURE.Waypoint
--- @field #number uid Unique ID of the point.
--- @field #string segment The segment this point belongs to.
--- @field Navigation.Point#NAVFIX navfix The navigation fix that determines the coordinates of this point.
-  
---- DEPARTURE class version.
--- @field #string version
-DEPARTURE.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
--- Initial DEPARTURE segment --> Intermediate DEPARTURE segment: starts at IF --> Final DEPARTURE segment
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new DEPARTURE class instance.
--- @param #DEPARTURE self
--- @param Wrapper.Airbase#AIRBASE Airbase The airbase or name of the airbase.
--- @param Wrapper.Airbase#AIRBASE.Runway Runway The runway or name of the runway.
--- @param #string Type Type of DEPARTURE (ILS, VOR, LOC).
--- @return #DEPARTURE self
-function DEPARTURE:New(Airbase, Runway)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #DEPARTURE
-
-  if type(Airbase)=="string" then
-    self.airbase=AIRBASE:FindByName(Airbase)
-  else
-    self.airbase=Airbase
-  end
-  
-  if type(Runway)=="string" then
-    self.runway=self.airbase:GetRunwayByName(Runway)
-  else
-    self.runway=Runway
-  end
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Set the primary navigation aid used in the DEPARTURE.
--- @param #DEPARTURE self
--- @param Navigation.Point#NAVAID NavAid The NAVAID.
--- @return #DEPARTURE self
-function DEPARTURE:SetNavAid(NavAid)
-
-  self.navaid=NavAid
-
-  return self
-end
-
---- Add a waypoint to the path of the DEPARTURE.
--- @param #DEPARTURE self
--- @param Navigation.Point#NAVFIX NavFix The navigation fix.
--- @param #string Segment The DEPARTURE segment this fix belongs to.
--- @return #DEPARTURE.Waypoint The waypoint data.
-function DEPARTURE:AddWaypoint(NavFix, Segment)
-
-  self.wpcounter=self.wpcounter+1
-
-  local point={} --#DEPARTURE.Waypoint
-  point.uid=self.wpcounter
-  point.segment=Segment
-  point.navfix=NavFix
-
-  table.insert(self.path, point)
-
-  return point
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- Add DEPARTURE private functions here.
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-

Moose Development/Moose/Navigation/Radios.lua

@@ -1,330 +0,0 @@
---- **NAVIGATION** - Airbase radios.
---
--- **Main Features:**
---
---    * Get radio frequencies of airbases
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20Radios).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Radios
--- @image NAVIGATION_Radios.png
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- RADIOS class.
--- @type RADIOS
--- 
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #table radios Radios.
--- 
--- @extends Core.Base#BASE
-
---- *It's not true I had nothing on, I had the radio on.* -- *Marilyn Monroe*
---
--- ===
---
--- # The RADIOS Concept
---
--- This class is desinged to make information about radios of a map/theatre easier accessible. The information contains mostly the frequencies of airbases of the map.
--- 
--- **Note** that try to avoid hard coding stuff in Moose since DCS is updated frequently and things change. Therefore, the main source of information is either a file `radio.lua` that can be
--- found in the installation directory of DCS for each map or a table that the user needs to provide.
--- 
--- # Basic Setup
--- 
--- A new `RADIOS` object can be created with the @{#RADIOS.NewFromFile}(*radio_lua_file*) function.
--- 
---     local radios=RADIOS:NewFromFile("<DCS_Install_Directory>\Mods\terrains\<Map_Name>\radios.lua")
---     radios:MarkerShow()
--- 
--- This will load the radios from the `<DCS_Install_Directory>` for the specific map and place markers on the F10 map. This is the first step you should do to ensure that the file
--- you provided is correct and all relevant radios are present.
--- 
--- # User Functions
--- 
--- ## F10 Map Markers
--- 
--- ## Position
--- 
--- ## Closest Radio
--- 
---
--- @field #RADIOS
-RADIOS = {
-  ClassName  = "RADIOS",
-  verbose    =         0,
-  radios    =        {},
-}
-
---- Radio item data structure.
--- @type RADIOS.Radio
--- @field #string radioId Radio ID.
--- @field #table role Roles of the radio (usually {"ground", "tower", "approach"}).
--- @field #table callsign Callsigns of the radio (usually the airbase name).
--- @field #table frequency Frequencies of the radios.
--- @field #table position Position table.
--- @field #table sceneObjects Scenery objects.
--- @field #string name Name of the airbase.
--- @field Wrapper.Airbase#AIRBASE airbase Airbase.
-
---- Radio item data structure.
--- @type RADIOS.Frequency
--- @field #number modu Modulation type.
--- @field #number freq Frequency in Hz.
-
-
---- RADIOS class version.
--- @field #string version
-RADIOS.version="0.0.0"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor(s)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new RADIOS class instance from a given table.
--- @param #RADIOS self
--- @param #table RadioTable Table with radios info.
--- @return #RADIOS self
-function RADIOS:NewFromTable(RadioTable)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #RADIOS
-  
-  local airbasenames=AIRBASE.GetAllAirbaseNames()
-  
-  for _,_radio in pairs(RadioTable) do
-    local radio=_radio --#RADIOS.Radio
-    
-    --UTILS.PrintTableToLog(radio)
-    --UTILS.PrintTableToLog(radio.callsign)
-    
-    -- The table structure of callsign is a bit awkward. We need to get the airbase name.
-    local cs=radio.callsign[1]
-    if cs and cs.common then
-      radio.name=cs.common[1]
-    elseif cs and cs.nato then
-      radio.name=cs.nato[1]
-    else
-      radio.name="Unknown"
-    end
-    
-    --UTILS.PrintTableToLog(radio.callsign)
-    
-    radio.name=self:_GetAirbaseName(airbasenames, radio.name)
-    
-    radio.airbase=AIRBASE:FindByName(radio.name)
-    
-    if radio.airbase then
-      radio.coordinate=radio.airbase:GetCoordinate()
-    end
-    
-    -- Add to table
-    table.insert(self.radios, radio)
-  end
-  
-  -- Debug output
-  self:I(string.format("Added %d radios", #self.radios))
-  
-  return self
-end
-
-
---- Create a new RADIOS class instance from a given file.
--- @param #RADIOS self
--- @param #string FileName Full path to the file containing the map radios.
--- @return #RADIOS self
-function RADIOS:NewFromFile(FileName)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #RADIOS
-  
-  local exists=UTILS.FileExists(FileName)
-  
-  if exists==false then
-    self:E(string.format("ERROR: file with radios info does not exist! File=%s", tostring(FileName)))
-    return nil
-  end
-  
-  -- Backup DCS radio table
-  local radiobak=UTILS.DeepCopy(radio)
-
-  -- This will create a global table `radio`  
-  dofile(FileName)
-
-  -- Get radios from table.
-  self=self:NewFromTable(radio)
-  
-  -- Restore DCS radio table
-  radio=UTILS.DeepCopy(radiobak)
-  
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get 3D position vector of a specific radio.
--- @param #RADIOS self
--- @param #RADIOS.Radio radio The radio data structure.
--- @return DCS#Vec3 Position vector.
-function RADIOS:GetVec3(radio)
-  return radio.vec3
-end
-
---- Get COORDINATE of a specific radio.
--- @param #RADIOS self
--- @param #RADIOS.Radio radio The radio data structure.
--- @return Core.Point#COORDINATE The coordinate.
-function RADIOS:GetCoordinate(radio)
-  return radio.coordinate
-end
-
---- Add markers for all radios on the F10 map.
--- @param #RADIOS self
--- @param #RADIOS.Radio Radio (Optional) Only this specifc radio.
--- @return #RADIOS self
-function RADIOS:MarkerShow(Radio)
-
-  for _,_radio in pairs(self.radios) do
-    local radio=_radio --#RADIOS.Radio
-    if Radio==nil or Radio.radioId==radio.radioId then
-      local coord=self:GetCoordinate(radio)
-      if coord then
-        local text=self:_GetMarkerText(radio)
-        if radio.markerID then
-          UTILS.RemoveMark(radio.markerID)
-        end
-        radio.markerID=coord:MarkToAll(text)
-      end
-    end
-  end
-
-  return self
-end
-
---- Remove markers of all radios from the F10 map.
--- @param #RADIOS self
--- @param #RADIOS.Radio Radio (Optional) Only this specifc radio.
--- @return #RADIOS self
-function RADIOS:MarkerRemove(Radio)
-
-  for _,_radio in pairs(self.radios) do
-    local radio=_radio --#RADIOS.Radio
-    if Radio==nil or Radio.radioId==radio.radioId then    
-      if radio.markerID then
-        UTILS.RemoveMark(radio.markerID)
-        radio.markerID=nil
-      end
-    end
-  end
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get text displayed in the F10 marker.
--- @param #RADIOS self
--- @param #RADIOS.Radio radio The radio data structure.
--- @return #string Marker text.
-function RADIOS:_GetMarkerText(radio)
-
-  local text=string.format("Radio %s", tostring(radio.name))
-  for b,f in pairs(radio.frequency) do
-    local frequency=f --#RADIOS.Frequency
-    local mod=frequency[1]
-    local fre=frequency[2]
-    local freq, funit=self:_GetFrequency(fre)
-    --UTILS.PrintTableToLog(frequency)
-    local band=self:_GetBandName(b)
-    text=text..string.format("\n%s: %.3f %s", band, freq, funit)
-  end
-    
-  return text
-end
-
-
---- Get converted frequency.
--- @param #RADIOS self
--- @param #number freq Frequency in Hz.
--- @return #number Frequency in better unit.
--- @return #string Unit ("Hz", "kHz", "MHz").
-function RADIOS:_GetFrequency(freq)
-
-  freq=freq or 0
-  local unit="Hz"
-  
-  if freq>=1e6 then
-    freq=freq/1e6
-    unit="MHz"
-  elseif freq>=1e3 then
-    freq=freq/1e3
-    unit="kHz"
-  end
-
-  return freq, unit
-end
-
---- Get name of frequency band.
--- @param #RADIOS self
--- @param #number BandNumber Band as number.
--- @return #string Band name.
-function RADIOS:_GetBandName(BandNumber)
-
-  if BandNumber~=nil then  
-    for bandName,bandNumber in pairs(ENUMS.FrequencyBand) do
-      if bandNumber==BandNumber then
-        return bandName
-      end  
-    end
-  end
-
-  return "Unknown"
-end
-
---- Get name of frequency band.
--- @param #RADIOS self
--- @param #table airbasenames Names of all airbases.
--- @param #string name Name of airbase.
--- @return #string Name of airbase
-function RADIOS:_GetAirbaseName(airbasenames, name)
-
-  local airbase=AIRBASE:FindByName(name)
-  
-  if airbase then
-    return name    
-  else
-    for _,airbasename in pairs(airbasenames) do
-      if string.find(airbasename, name) then
-        return airbasename
-      end    
-    end
-  end
-
-  return "Unknown"
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Navigation/Template.lua

@@ -1,108 +0,0 @@
---- **NAVIGATION** - Template.
---
--- **Main Features:**
---
---    * Stuff
---    * More Stuff
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20Template).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Template
--- @image NAVIGATION_Template.png
-
-
---- TEMPLATE class.
--- @type TEMPLATE
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @extends Core.Base#BASE
-
---- *A fleet of British ships at war are the best negotiators.* -- Horatio Nelson
---
--- ===
---
--- # The TEMPLATE Concept
---
--- The TEMPLATE class has a great concept!
--- 
--- # Basic Setup
--- 
--- A new `TEMPLATE` object can be created with the @{#TEMPLATE.New}() function.
--- 
---     myTemplate=TEMPLATE:New()
---     myTemplate:SetXYZ(X, Y, Z)
---     
--- This is how it works.
---
--- @field #TEMPLATE
-TEMPLATE = {
-  ClassName       = "TEMPLATE",
-  verbose         =       0,
-}
-
---- Type of navaid
--- @type TEMPLATE.Type
--- @field #string VOR VOR
--- @field #string NDB NDB
-TEMPLATE.TYPE={
-  VOR="VOR",
-  NDB="NDB",
-}
-  
---- TEMPLATE class version.
--- @field #string version
-TEMPLATE.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new TEMPLATE class instance.
--- @param #TEMPLATE self
--- @return #TEMPLATE self
-function TEMPLATE:New()
-
-  -- Inherit everything from SCENERY class.
-  self=BASE:Inherit(self, BASE:New()) -- #TEMPLATE
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Set frequency.
--- @param #TEMPLATE self
--- @param #number Frequency Frequency in Hz.
--- @return #TEMPLATE self
-function TEMPLATE:SetFrequency(Frequency)
-
-  self.frequency=Frequency
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Navigation/Towns.lua

@@ -1,296 +0,0 @@
---- **NAVIGATION** - Beacons of the map/theatre.
---
--- **Main Features:**
---
---    * Find towns of map
---    * Road and rail connections
--- 
--- ===
---
--- ## Example Missions:
---
--- Demo missions can be found on [github](https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/Navigation%20-%20Towns).
--- 
--- ===
---
--- ### Author: **funkyfranky**
--- 
--- ===
--- @module Navigation.Towns
--- @image NAVIGATION_Towns.png
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- TOWNS class.
--- @type TOWNS
--- 
--- @field #string ClassName Name of the class.
--- @field #number verbose Verbosity of output.
--- @field #table towns Towns.
--- 
--- @extends Core.Base#BASE
-
---- *Hope is the beacon that guides lost ships back to the shore.*
---
--- ===
---
--- # The TOWNS Concept
---
--- This class is desinged to make information about towns of a map/theatre easier accessible. The information contains location and road/rail connections of the towns.
--- 
--- **Note** that try to avoid hard coding stuff in Moose since DCS is updated frequently and things change. Therefore, the main source of information is either a file `towns.lua` that can be
--- found in the installation directory of DCS for each map or a table that the user needs to provide.
--- 
--- # Basic Setup
--- 
--- A new `TOWNS` object can be created with the @{#TOWNS.NewFromFile}(*towns_lua_file*) function.
--- 
---     local towns=TOWNS:NewFromFile("<DCS_Install_Directory>\Mods\terrains\<Map_Name>\towns.lua")
---     towns:MarkerShow()
--- 
--- This will load the towns from the `<DCS_Install_Directory>` for the specific map and place markers on the F10 map. This is the first step you should do to ensure that the file
--- you provided is correct and all relevant towns are present.
--- 
--- # User Functions
--- 
--- ## F10 Map Markers
--- 
--- ## Position
--- 
--- ## Get Closest Town
--- 
---
--- @field #TOWNS
-TOWNS = {
-  ClassName  =   "TOWNS",
-  verbose    =         0,
-  towns      =        {},
-}
-
---- Town data.
--- @type TOWNS.Town
--- @field #string display_name Displayed name.
--- @field #string name Name of the town.
--- @field #number latitude Latitude.
--- @field #number longitude Longitude
--- @field DCS#Vec3 vec3 Position vector 3D.
--- @field Core.Point#COORDINATE coordinate The coordinate.
--- @field Core.Point#COORDINATE coordRoad The coordinate of the closest road.
--- @field Core.Point#COORDINATE coordRail The coordinate of the closest railway.
--- @field #number markerID ID for the F10 marker.
-
---- TOWNS class version.
--- @field #string version
-TOWNS.version="0.0.1"
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- ToDo list
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
--- TODO: A lot...
--- TODO: Road connection
--- TODO: Rail connection
--- TODO: Connection between towns
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Constructor(s)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Create a new TOWNS class instance from a given table.
--- @param #TOWNS self
--- @param #table TownTable Table with all towns data.
--- @return #TOWNS self
-function TOWNS:NewFromTable(TownTable)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #TOWNS
-  
-  for TownName,_town in pairs(TownTable) do
-    local town=_town --#TOWNS.Town
-    
-    town.name=TownName    
-
-    -- Get coordinate
-    town.coordinate=COORDINATE:NewFromLLDD(town.latitude, town.longitude)
-    
-    -- Get coordinate of closest road
-    town.coordRoad=town.coordinate:GetClosestPointToRoad()
-    
-    -- Get coordinate of closest rail
-    town.coordRail=town.coordinate:GetClosestPointToRoad(true)
-    
-    -- Add to table
-    table.insert(self.towns, town)
-  end
-  
-  -- Debug output
-  self:I(string.format("Added %d towns", #self.towns))
-  
-  return self
-end
-
-
---- Create a new TOWNS class instance from a given file.
--- @param #TOWNS self
--- @param #string FileName Full path to the file containing the towns data.
--- @return #TOWNS self
-function TOWNS:NewFromFile(FileName)
-
-  -- Inherit everything from BASE class.
-  self=BASE:Inherit(self, BASE:New()) -- #TOWNS
-  
-  local exists=UTILS.FileExists(FileName)
-  
-  if exists==false then
-    self:E(string.format("ERROR: file with towns info does not exist!"))
-    return nil
-  end
-
-  -- This will create a global table `towns`  
-  dofile(FileName)
-
-  -- Get towns from table.
-  self=self:NewFromTable(towns)
-  
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- User Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get 3D position vector of a specific town.
--- @param #TOWNS self
--- @param #TOWNS.Town town The town data structure.
--- @return DCS#Vec3 Position vector.
-function TOWNS:GetVec3(town)
-  return town.vec3
-end
-
---- Get COORDINATE of a specific town.
--- @param #TOWNS self
--- @param #TOWNS.Town town The town data structure.
--- @return Core.Point#COORDINATE The coordinate.
-function TOWNS:GetCoordinate(town)
-  return town.coordinate
-end
-
---- Get closest road coordinate of a town.
--- @param #TOWNS self
--- @param #TOWNS.Town town The town data structure.
--- @return Core.Point#COORDINATE The closest road coordinate.
-function TOWNS:GetCoordRoad(town)
-  return town.coordRoad
-end
-
---- Get closest rail coordinate of a town.
--- @param #TOWNS self
--- @param #TOWNS.Town town The town data structure.
--- @return Core.Point#COORDINATE The closest rail coordinate.
-function TOWNS:GetCoordRail(town)
-  return town.coordRail
-end
-
---- Get road connection between two towns.
--- @param #TOWNS self
--- @param #TOWNS.Town townA The town data structure.
--- @param #TOWNS.Town townB The town data structure.
--- @return #table Table containing path coordinates.
-function TOWNS:GetConnectionRoad(townA, townB)
-
-  local path=townA.coordRoad:GetPathOnRoad(townB.coordRoad)
-
-  return path
-end
-
---- Find closest town to a given coordinate.
--- @param #TOWNS self
--- @param Core.Point#COORDINATE Coordinate The reference coordinate.
--- @return #TOWNS.Town The closest town.
-function TOWNS:GetClosestTown(Coordinate)
-
-  local Town=nil --#TOWNS.Town
-  local distmin=math.huge
-  
-  for _,_town in pairs(self.towns) do
-    local town=_town --#TOWNS.Town
-    
-    local dist=Coordinate:Get2DDistance(town.coordinate)
-    
-    if dist<distmin then
-      distmin=dist
-      Town=town
-    end    
-  end
-  
-  return Town
-end
-
---- Get table of all towns, optionally of a given type.
--- @param #TOWNS self
--- @return #table Table of towns. Each element is of type #TOWN.Town.
-function TOWNS:GetTowns()
-  return self.towns
-end
-
---- Add markers for all towns on the F10 map.
--- @param #TOWNS self
--- @param #TOWNS.Town Town (Optional) Only this specifc town.
--- @return #TOWNS self
-function TOWNS:MarkerShow(Town)
-
-  for _,_town in pairs(self.towns) do
-    local town=_town --#TOWNS.Town
-    if Town==nil or Town.name==town.name then
-      local text=self:_GetMarkerText(town)
-      local coord=town.coordinate
-      if town.markerID then
-        UTILS.RemoveMark(town.markerID)
-      end
-      town.markerID=coord:MarkToAll(text)
-    end
-  end
-
-  return self
-end
-
---- Remove markers of all towns from the F10 map.
--- @param #TOWNS self
--- @param #TOWNS.Town Town (Optional) Only this specifc town.
--- @return #TOWNS self
-function TOWNS:MarkerRemove(Town)
-
-  for _,_town in pairs(self.towns) do
-    local town=_town --#TOWNS.Town
-    if Town==nil or Town.name==town.name then    
-      if town.markerID then
-        UTILS.RemoveMark(town.markerID)
-        town.markerID=nil
-      end
-    end
-  end
-
-  return self
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Private Functions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Get text displayed in the F10 marker.
--- @param #TOWNS self
--- @param #TOWNS.Town town The town data structure.
--- @return #string Marker text.
-function TOWNS:_GetMarkerText(town)
-
-  local text=string.format("Town %s", town.name)  
-  --text=text..string.format("\nCallsign: %s", tostring(beacon.callsign))
-  
-  return text
-end
-
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Ops/Airboss.lua

@@ -12229,8 +12229,8 @@ function AIRBOSS:GetHeadingIntoWind_new( vdeck, magnetic, coord )
   local magvar= magnetic and self.magvar or 0
 
   -- Ship heading so cross wind is min for the given wind.
-  -- local intowind = (540 + (windto - magvar + math.deg(theta) )) % 360 -- VNAO Edit: Using old heading into wind algorithm
-  local intowind = self:GetHeadingIntoWind_old(vdeck,magnetic) -- VNAO Edit: Using old heading into wind algorithm
+  local intowind = (540 + (windto - magvar + math.deg(theta) )) % 360
+
 
   return intowind, v
 end
@@ -12683,6 +12683,7 @@ function AIRBOSS:_LSOgrade( playerData )
   local nS=count(G, '%(')
   local nN=N-nS-nL
   
+  if TIG=="_OK_" then nL = nL -1 end --Circuit added to prevent grade deduction for perfect groove
 
   -- Groove time 15-18.99 sec for a unicorn. Or 60-65 for V/STOL unicorn.
   local Tgroove=playerData.Tgroove
@@ -12712,7 +12713,6 @@ function AIRBOSS:_LSOgrade( playerData )
     else
 
     if vtol then
-
       -- Add AV-8B Harrier devation allowances due to lower groundspeed and 3x conventional groove time, this allows to maintain LSO tolerances while respecting the deviations are not unsafe.--Pene testing
       -- Large devaitions still result in a No Grade, A Unicorn still requires a clean pass with no deviation.
 

Moose Development/Moose/Ops/Brigade.lua

@@ -601,79 +601,6 @@ function BRIGADE:onafterStatus(From, Event, To)
     self:I(self.lid..text)
   end    
 
-  if self.verbose>=3 then
-  
-    -- Count numbers
-    local Ntotal=0
-    local Nspawned=0
-    local Nrequested=0
-    local Nreserved=0
-    local Nstock=0
-    
-    local text="\n===========================================\n"
-    text=text.."Assets:"
-    local legion=self --Ops.Legion#LEGION
-
-    for _,_cohort in pairs(legion.cohorts) do
-      local cohort=_cohort --Ops.Cohort#COHORT
-      
-      for _,_asset in pairs(cohort.assets) do
-        local asset=_asset --Functional.Warehouse#WAREHOUSE.Assetitem
-
-        local state="In Stock"
-        if asset.flightgroup then
-          state=asset.flightgroup:GetState()
-          local mission=legion:GetAssetCurrentMission(asset)
-          if mission then
-            state=state..string.format(", Mission \"%s\" [%s]", mission:GetName(), mission:GetType())
-          end
-        else
-          if asset.spawned then
-            env.info("FF ERROR: asset has opsgroup but is NOT spawned!")
-          end
-          if asset.requested and asset.isReserved then
-            env.info("FF ERROR: asset is requested and reserved. Should not be both!")
-            state="Reserved+Requested!"
-          elseif asset.isReserved then
-            state="Reserved"
-          elseif asset.requested then
-            state="Requested"
-          end
-        end
-                    
-        -- Text.
-        text=text..string.format("\n[UID=%03d] %s Legion=%s [%s]: State=%s [RID=%s]", 
-        asset.uid, asset.spawngroupname, legion.alias, cohort.name, state, tostring(asset.rid))
-        
-        
-        if asset.spawned then
-          Nspawned=Nspawned+1
-        end            
-        if asset.requested then
-          Nrequested=Nrequested+1
-        end  
-        if asset.isReserved then
-          Nreserved=Nreserved+1
-        end                      
-        if not (asset.spawned or asset.requested or asset.isReserved) then
-          Nstock=Nstock+1
-        end
-        
-        Ntotal=Ntotal+1
-        
-      end
-  
-    end
-    text=text.."\n-------------------------------------------"
-    text=text..string.format("\nNstock     = %d", Nstock)
-    text=text..string.format("\nNreserved  = %d", Nreserved)
-    text=text..string.format("\nNrequested = %d", Nrequested)
-    text=text..string.format("\nNspawned   = %d", Nspawned)
-    text=text..string.format("\nNtotal     = %d (=%d)", Ntotal, Nstock+Nspawned+Nrequested+Nreserved)
-    text=text.."\n==========================================="
-    self:I(self.lid..text)
-  end  
-
 end
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Ops/OpsGroup.lua

@@ -445,7 +445,6 @@ OPSGROUP.TaskType={
 -- @field Wrapper.Marker#MARKER marker Marker on the F10 map.
 -- @field #string formation Ground formation. Similar to action but on/off road.
 -- @field #number missionUID Mission UID (Auftragsnr) this waypoint belongs to.
--- @field Navigation.FlightPlan#FLIGHTPLAN flightplan Flightplan this waypoint belongs to.
 
 --- Cargo Carrier status.
 -- @type OPSGROUP.CarrierStatus
@@ -574,11 +573,6 @@ function OPSGROUP:New(group)
 
   -- Set DCS group and controller.
   self.dcsgroup=self:GetDCSGroup()
-  
-  if not self.dcsgroup then
-    return
-  end
-  
   self.controller=self.dcsgroup:getController()
 
   -- Category.
@@ -11368,9 +11362,9 @@ function OPSGROUP:_SimpleTaskFunction(Function, uid)
   return DCSTask
 end
 
---- Enhanced waypoint table.
+--- Enhance waypoint table.
 -- @param #OPSGROUP self
--- @param #OPSGROUP.Waypoint waypoint Waypoint data.
+-- @param #OPSGROUP.Waypoint Waypoint data.
 -- @return #OPSGROUP.Waypoint Modified waypoint data.
 function OPSGROUP:_CreateWaypoint(waypoint)
 
@@ -13626,24 +13620,20 @@ end
 -- @return Core.Point#COORDINATE The coordinate of the object.
 function OPSGROUP:_CoordinateFromObject(Object)
 
-  env.info("FF coordfrom object")
   if Object then
-    if VECTOR._IsVector(Object) then
-      env.info("FF VECTOR")
-      return Object:GetCoordinate()
-    elseif Object:IsInstanceOf("COORDINATE") then
+    if Object:IsInstanceOf("COORDINATE") then
       return Object
     else
       if Object:IsInstanceOf("POSITIONABLE") or Object:IsInstanceOf("ZONE_BASE") then
-        self:E(self.lid.."WARNING: Coordinate is not a COORDINATE but a POSITIONABLE or ZONE. Trying to get coordinate")
+        self:T(self.lid.."WARNING: Coordinate is not a COORDINATE but a POSITIONABLE or ZONE. Trying to get coordinate")
         local coord=Object:GetCoordinate()
         return coord
       else
-        self:E(self.lid.."ERROR: Coordinate is neither a COORDINATE nor any POSITIONABLE or ZONE!")
+        self:T(self.lid.."ERROR: Coordinate is neither a COORDINATE nor any POSITIONABLE or ZONE!")
       end
     end
   else
-    self:E(self.lid.."ERROR: Object passed is nil!")
+    self:T(self.lid.."ERROR: Object passed is nil!")
   end
 
   return nil

Moose Development/Moose/Utilities/Enums.lua

@@ -1386,28 +1386,3 @@ ENUMS.FARPObjectTypeNamesAndShape ={
   [ENUMS.FARPType.PADSINGLE] = { TypeName="FARP_SINGLE_01", ShapeName="FARP_SINGLE_01"},
 }
 
---- Radio frequency bands (HF, VHF, UHF)
--- @type ENUMS.FrequencyBand
--- @field #number HF High frequency
--- @field #number VHF_LOW Very high frequency
--- @field #number VHF_HI Very high frequency
--- @field #number UHF Ultra high frequency
-ENUMS.FrequencyBand = {
-  HF = 0,
-  VHF_LOW = 1,
-  VHF_HI = 2,
-  UHF = 3,
-}
-
---- Radio modulation types (AM, FM)
--- @type ENUMS.ModulationType
--- @field #number AM Amplitude modulation
--- @field #number FM Frequency modulation
--- @field #number AMFM Amplitude and frequency modulation
--- @field #number DISCARD Discard modulation
-ENUMS.ModulationType = {
-  AM = 0,
-  FM = 1,
-  AMFM = 2,
-  DISCARD = -1,
-}

Moose Development/Moose/Utilities/Utils.lua

@@ -805,33 +805,6 @@ UTILS.kg2lbs = function( kg )
   return kg * 2.20462
 end
 
---- Convert latitude or longitude from degrees, minutes, seconds (DMS) to decimal degrees (DD).
--- @param #number Degrees Degrees in grad.
--- @param #number Minutes Minutes.
--- @param #number Seconds Seconds.
--- @return #number Latitude or Longitude in decimal degrees.
-UTILS.LLDMSToDD = function(Degrees, Minutes, Seconds)
-
-  local dd=tonumber(Degrees or 0) + tonumber(Minutes or 0)/60 + tonumber(Seconds or 0)/3600
-
-  return dd
-end
-
---- Convert latitude or longitude from degrees, minutes, seconds (DMS) given in text form to decimal degrees (DD).
--- @param #string LatOrLongString Latitude or longitude passed as ttring in format `DD°MM'SS.SS"`.
--- @return #number Latitude or Longitude in decimal degrees.
-UTILS.LLDMSstringToDD = function(LatOrLongString)
-
-  local hem=string.match(LatOrLongString, "(%a)")
-  local Degrees=string.match(LatOrLongString, "(%d+)°")
-  local Minutes=string.match(LatOrLongString, "(%d+)'")
-  local Seconds=string.match(LatOrLongString, "([%d\.]+)\"")
-
-  local dd=UTILS.LLDMSToDD(Degrees, Minutes, Seconds)
-
-  return dd
-end
-
 --[[acc:
 in DM: decimal point of minutes.
 In DMS: decimal point of seconds.
@@ -1552,22 +1525,6 @@ function UTILS.Vec2Add(a, b)
   return {x=a.x+b.x, y=a.y+b.y}
 end
 
---- Multiply 2D vector by a scalar value.
--- @param DCS#Vec2 a Vector in 2D with x, y components.
--- @param #number c Scalar value.
--- @return DCS#Vec2 Vector 
-function UTILS.Vec2Mult(a, c)
-  return {x=c*a.x, y=c*a.y}
-end
-
---- Multiply 3D vector by a scalar value.
--- @param DCS#Vec3 a Vector in 3D with x, y, z components.
--- @param #number c Scalar value.
--- @return DCS#Vec3 Vector 
-function UTILS.VecMult(a, c)
-  return {x=c*a.x, y=c*a.y, z=c*a.z}
-end
-
 --- Calculate the angle between two 3D vectors.
 -- @param DCS#Vec3 a Vector in 3D with x, y, z components.
 -- @param DCS#Vec3 b Vector in 3D with x, y, z components.
@@ -1588,24 +1545,6 @@ function UTILS.VecAngle(a, b)
   return math.deg(alpha)
 end
 
---- Calculate the angle between two 3D vectors.
--- @param DCS#Vec3 a Vector in 3D with x, y, z components.
--- @param DCS#Vec3 b Vector in 3D with x, y, z components.
--- @return #number Angle alpha between and b in degrees.
-function UTILS.VecAngleSigned(a, b)
-
-      local a=UTILS.VecSubstract(s1.p2.vec3, s1.p1.vec3)
-      
-      local b=UTILS.VecSubstract(s2.p2.vec3, s2.p1.vec3)
-      
-      local h1=UTILS.VecHdg(a)
-      local h2=UTILS.VecHdg(b)
-      
-      local angle=h1-h2 --UTILS.VecAngle(a, b)
-
-
-end
-
 --- Calculate "heading" of a 3D vector in the X-Z plane.
 -- @param DCS#Vec3 a Vector in 3D with x, y, z components.
 -- @return #number Heading in degrees in [0,360).
@@ -1628,20 +1567,6 @@ function UTILS.Vec2Hdg(a)
   return h
 end
 
---- Calculate the difference between two "heading", i.e. angles in [0,360) deg.
--- @param DCS#Vec3 a Vector a.
--- @param DCS#Vec3 a Vector b.
--- @return #number Heading difference in degrees.
-function UTILS.VecHdgDiff(a, b)
-
-  local ha=math.deg(math.atan2(a.z, a.x))
-  local hb=math.deg(math.atan2(b.z, b.x))
-  
-  local angle=ha-hb
-
-  return angle
-end
-
 --- Calculate the difference between two "heading", i.e. angles in [0,360) deg.
 -- @param #number h1 Heading one.
 -- @param #number h2 Heading two.
@@ -3302,64 +3227,6 @@ function UTILS.BearingToCardinal(Heading)
   end
 end
 
---- Adjust given heading so that is is in [0, 360).
--- @param #number Heading The heading in degrees.
--- @return #number Adjust heading in [0,360).
-function UTILS.AdjustHeading360(Heading)
-
-  while Heading>=360 or Heading<0 do
-    if Heading>=360 then
-      Heading=Heading-360
-    elseif Heading<0 then
-      Heading=Heading+360
-    end
-  end
-
-  return Heading
-end
-
---- Transfroms a given 2D vector 3D.
--- This takes care of ED's different conventions for 2D and 3D coordinate systems.
--- @param DCS#Vec2 Vec Vector to be transformed. Can be any table/object that has at least x and y and optionally a z component.
--- @param #boolean OnSurface If `true`, new vector's y-component (alt) is at surface height. Otherwise, it is set to 0.
--- @return DCS#Vec3 Vector in 3D with x-, y- and z-components.
-function UTILS.VecTo3D(Vec, OnSurface)
-
-  local vec={x=0, y=0, z=0} --DCS#Vec3
-  if Vec.z then
-    -- Vector is 3D already ==> Nothing to do.
-    vec.x=Vec.x
-    vec.y=Vec.y
-    vec.z=Vec.z
-  else
-    -- Vector is 2D
-    vec.x=Vec.x
-    vec.y=OnSurface and land.getHeight({x=Vec.x, y=Vec.y}) or 0
-    vec.z=Vec.y
-  end
-
-  return vec
-end
-
---- Transfroms a given 3D (or 2D) vector to 2D.
--- This takes care of ED's different conventions for 2D and 3D coordinate systems.
--- @param DCS#Vec3 Vec Vector to be transformed. Can be any table/object that has at least x and y and optionally a z component.
--- @return DCS#Vec2 Vector in 2D with x- and y-components.
-function UTILS.VecTo2D(Vec)
-
-  local vec={x=0, y=0} --DCS#Vec2
-  
-  if Vec.z then
-    vec.x=Vec.x
-    vec.y=Vec.z
-  else
-    vec.x=Vec.x
-    vec.y=Vec.y
-  end
-
-  return vec
-end
-
 --- Create a BRAA NATO call string BRAA between two GROUP objects
 -- @param Wrapper.Group#GROUP FromGrp GROUP object
 -- @param Wrapper.Group#GROUP ToGrp GROUP object
@@ -4389,17 +4256,55 @@ function UTILS.SpawnFARPAndFunctionalStatics(Name,Coordinate,FARPType,Coalition,
   
   if NumberPads > 1 then
     local Grid = UTILS.GenerateGridPoints(FarpVec2, NumberPads, SpacingX, SpacingY)
+    local groupData = {
+    ["visible"] = true,
+    ["hidden"] = false,
+    ["units"] = {},
+    ["y"] = 0,  -- Group center latitude
+    ["x"] = 0,  -- Group center longitude
+    ["name"] = Name,
+    } 
+    local unitData = {
+            ["category"] = "Heliports",
+            ["type"] = STypeName,  -- FARP type
+            ["y"] = 0,  -- Latitude coordinate (meters)
+            ["x"] = 0,  -- Longitude coordinate (meters)
+            ["name"] = Name,
+            ["heading"] = 0,  -- Heading in radians
+            ["heliport_modulation"] = mod,  -- 0 = AM, 1 = FM
+            ["heliport_frequency"] = freq,  -- Radio frequency in MHz
+            ["heliport_callsign_id"] = callsign,  -- Callsign ID
+            ["dead"] = false,
+            ["shape_name"] = SShapeName,
+            ["dynamicSpawn"] = DynamicSpawns,
+            ["allowHotStart"] = HotStart,
+    }
     for id,gridpoint in ipairs(Grid) do
       -- Spawn FARP
-      local location = COORDINATE:NewFromVec2(gridpoint)
-      local newfarp = SPAWNSTATIC:NewFromType(STypeName,"Heliports",Country) --  "Invisible FARP" "FARP"
-      newfarp:InitShape(SShapeName) -- "invisiblefarp" "FARPS"
-      newfarp:InitFARP(callsign,freq,mod,DynamicSpawns,HotStart)
-      local spawnedfarp = newfarp:SpawnFromCoordinate(location,0,Name.."-"..id)
-      table.insert(ReturnObjects,spawnedfarp)
-      
-      PopulateStorage(Name.."-"..id,liquids,equip,airframes)   
+      local UnitTemplate = UTILS.DeepCopy(unitData)
+      UnitTemplate.x = gridpoint.x
+      UnitTemplate.y = gridpoint.y
+      if id > 1 then UnitTemplate.name = Name.."-"..id end
+      table.insert(groupData.units,UnitTemplate)
+      if id==1 then
+        groupData.x = gridpoint.x
+        groupData.y = gridpoint.y
       end   
+    end
+    --BASE:I("Spawning FARP")
+    --UTILS.PrintTableToLog(groupData,1)
+    local Static=coalition.addGroup(Country, -1, groupData)
+    -- Currently DCS >= 2.8 does not trigger birth events if FARPS are spawned!
+    -- We create such an event. The airbase is registered in Core.Event
+    local Event = {
+      id = EVENTS.Birth,
+      time = timer.getTime(),
+      initiator = Static
+      }
+    -- Create BIRTH event.
+    world.onEvent(Event)
+    
+    PopulateStorage(Name.."-1",liquids,equip,airframes)
   else
     -- Spawn FARP
     local newfarp = SPAWNSTATIC:NewFromType(STypeName,"Heliports",Country) --  "Invisible FARP" "FARP"

Moose Development/Moose/Wrapper/Airbase.lua

@@ -31,7 +31,6 @@
 -- @field #AIRBASE.Runway runwayLanding Runway used for landing.
 -- @field #AIRBASE.Runway runwayTakeoff Runway used for takeoff.
 -- @field Wrapper.Storage#STORAGE storage The DCS warehouse storage.
--- @field #table taxiways Taxiways stored as PATHLINEs.
 -- @extends Wrapper.Positionable#POSITIONABLE
 
 --- Wrapper class to handle the DCS Airbase objects:
@@ -79,7 +78,6 @@ AIRBASE = {
     [Airbase.Category.SHIP] = "Ship",
   },
   activerwyno = nil,
-  taxiways = {},
 }
 
 --- Enumeration to identify the airbases in the Caucasus region.
@@ -1456,32 +1454,6 @@ AIRBASE.SpotStatus = {
   RESERVED="Reserved",
 }
 
---- ICAO Codes.
--- @type AIRBASE.ICAO
-AIRBASE.ICAO = {
-  UGTB=AIRBASE.Caucasus.Tbilisi_Lochini,
-  UGKO=AIRBASE.Caucasus.Kutaisi,
-  UG5X=AIRBASE.Caucasus.Kobuleti,
-  UG24=AIRBASE.Caucasus.Soganlug,
-  UG27=AIRBASE.Caucasus.Vaziani,
-  UGSS=AIRBASE.Caucasus.Sukhumi_Babushara,
-  UG23=AIRBASE.Caucasus.Gudauta,
-  URSS=AIRBASE.Caucasus.Sochi_Adler,
-  URMO=AIRBASE.Caucasus.Beslan,
-  URMN=AIRBASE.Caucasus.Nalchik,
-  XRMF=AIRBASE.Caucasus.Mozdok,
-  URMM=AIRBASE.Caucasus.Mineralnye_Vody,
-  URKH=AIRBASE.Caucasus.Maykop_Khanskaya,
-  URKK=AIRBASE.Caucasus.Krasnodar_Pashkovsky,
-  URKL=AIRBASE.Caucasus.Krasnodar_Center,
-  URKG=AIRBASE.Caucasus.Gelendzhik,
-  URKN=AIRBASE.Caucasus.Novorossiysk,
-  URKW=AIRBASE.Caucasus.Krymsk,
-  URKA=AIRBASE.Caucasus.Anapa_Vityazevo,
-}
-
-
-
 --- Runway data.
 -- @type AIRBASE.Runway
 -- @field #string name Runway name.
@@ -1670,47 +1642,14 @@ end
 
 --- Find a AIRBASE in the _DATABASE using the name of an existing DCS Airbase.
 -- @param #AIRBASE self
--- @param #string AirbaseName The name of the airbase. Can also be the ICAO code or the airbase ID. 
+-- @param #string AirbaseName The Airbase Name.
 -- @return #AIRBASE self
 function AIRBASE:FindByName( AirbaseName )
 
   local AirbaseFound = _DATABASE:FindAirbase( AirbaseName )
-  
-  if not AirbaseFound then
-    AirbaseFound=self:FindByICAO(AirbaseName)
-  end
-  
-  if not AirbaseFound then
-    AirbaseFound=self:FindByID(AirbaseName)
-  end
-    
   return AirbaseFound
 end
 
-
---- Find an AIRBASE in the _DATABASE using the [International Civil Aviation Organization](https://en.wikipedia.org/wiki/ICAO_airport_code) (ICAO) airport code.
--- The code consists of four characters. Typically, the first one or two letters of the ICAO code indicate the country and the remaining letters identify the airport.
--- 
--- **NOTE** that the ICAO code cannot be retrieved via the DCS API and has to be hard coded into the MOOSE code. Therefore, it is a rare occasion where 
--- @param #AIRBASE self
--- @param #string AirbaseICAO The Airbase ICAO code.
--- @return #AIRBASE self
-function AIRBASE:FindByICAO( AirbaseICAO )
-
-  if AirbaseICAO then
-
-    local name=AIRBASE.ICAO[AirbaseICAO]
-    
-    env.info(string.format("FF ICAO=%s, Name=%s", tostring(AirbaseICAO), tostring(name)))
-    
-    local Airbase=self:FindByName(name)
-    return Airbase
-    
-  end
-  
-  return nil
-end
-
 --- Find a AIRBASE in the _DATABASE by its ID.
 -- @param #AIRBASE self
 -- @param #number id Airbase ID.
@@ -2023,129 +1962,6 @@ function AIRBASE:IsShip()
   return self.isShip
 end
 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--- Taxi ways
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-
---- Add a taxiway from a given PATHLINE.
--- @param #AIRBASE self
--- @param Core.Pathline#PATHLINE TaxiPathline Pathline of the taxi way or name of pathline as #string.
--- @param #string Name Name of the taxi way, *e.g.* "Alpha", or "Alpha-Kilo". Default is name of pathline.
--- @return #AIRBASE self
-function AIRBASE:AddTaxiway(TaxiPathline, Name)
-
-  -- If passed as string, get pathline.
-  if type(TaxiPathline)=="string" then
-    TaxiPathline=PATHLINE:FindByName(TaxiPathline)
-  end
-
-  -- Set name.
-  Name=Name or TaxiPathline:GetName()
-
-  -- Create a deep copy.
-  local taxiway=UTILS.DeepCopy(TaxiPathline) --Core.Pathline#PATHLINE
-  
-  -- Set name.
-  taxiway.name=Name
-
-  -- Add to taxiways.
-  self.taxiways[Name]=taxiway
-  
-  
-  --self:I(self.taxiways)
-
-  return self
-end
-
-
---- Find the shortest path using taxiways to get from given coodinates A to B on the airbase.
--- Note that the taxi ways have to be manually added with the `AIRBASE:AddTaxiway()` function.
--- @param #AIRBASE self
--- @param Core.Point#COORDINATE StartCoord Start coordinate.
--- @param Core.Point#COORDINATE EndCoord End coordinate.
--- @return Core.Pathline#PATHLINE Shortest path on taxiways from `StartCoord` to `EndCoord`.
--- @return #table Table of used taxi way pathlines.
-function AIRBASE:FindTaxiwaysFromAtoB(StartCoord, EndCoord)
-
-  -- Create A* pathfinding.  
-  local astar=ASTAR:New()
-  
-  -- Add pathlines of taxiways of airport.
-  for _,_taxiway in pairs(self.taxiways) do
-    local taxiway=_taxiway --Core.Pathline#PATHLINE
-    
-    astar:AddNodeFromPathlineName(taxiway)  
-  end
-  
-  -- Set cost function.
-  astar:SetCostDist2D()
-  
-  -- Set valid neighbours to be on the same pathline or at most 10 meters between nodes to jump from one pathline/taxiway to another.
-  astar:SetValidNeighbourPathline(10)  
-
-  -- Set start and end coordinates.
-  astar:SetStartCoordinate(StartCoord)    
-  astar:SetEndCoordinate(EndCoord)
-  
-  -- Get pathline.
-  local taxipath, nodes=astar:GetPathline()
-  
-  local taxiways=astar:GetPathlinesFromNodes(nodes)
-
-  return taxipath, taxiways
-end
-
---- Get closest taxiway from a given reference coordinate.
--- @param #AIRBASE self
--- @param Core.Point#COORDINATE Coord Reference coordinate.
--- @return Core.Pathline#PATHLINE Taxiway.
--- @return #number Distance to taxiway in meters.
--- @return Core.Point#COORDINATE Coordinate on taxiway closest to reference coordinate.
--- @return Core.Pathline#PATHLINE.Segment Segment of the taxiway closest to the reference coordinate.
-function AIRBASE:GetClosestTaxiway(Coord)
-
-  local taxipath=nil
-  local distmin=math.huge
-  local coordmin=nil
-  local segmin=nil
-  
-  for name,_pathline in pairs(self.taxiways) do
-    local pathline=_pathline --Core.Pathline#PATHLINE
-    
-    local coord, dist, segment=pathline:GetClosestPoint3D(Coord)
-    
-    if dist<distmin then
-      taxipath=pathline
-      coordmin=coord
-      distmin=dist
-      segmin=segment
-    end
-  
-  end
-
-  return taxipath, distmin, coordmin, segmin
-end
-
-
---- Find the shortest path using taxiways to get from given parking spot to the starting point of a runway.
--- Note that the taxi ways have to be manually added with the `AIRBASE:AddTaxiway()` function.
--- @param #AIRBASE self
--- @param #AIRBASE.ParkingSpot ParkingSpot Parking spot.
--- @param #AIRBASE.Runway Runway The runway. If none is given, we take the active runway for takeoff.
--- @return Core.Pathline#PATHLINE Shortest path on taxiways from `StartCoord` to `EndCoord`.
--- @return #table Table of used taxi way pathlines.
-function AIRBASE:FindTaxiwaysParkingToRunway(ParkingSpot, Runway)
-
-  Runway=Runway or self:GetActiveRunwayTakeoff()
-
-  local StartCoord=ParkingSpot.Coordinate  
-  local EndCoord=Runway.position
-  
-  local taxipath, taxiways=self:FindTaxiwaysFromAtoB(StartCoord,EndCoord)
-
-  return taxipath, taxiways
-end
-
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- Parking
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Moose Development/Moose/Wrapper/Positionable.lua

@@ -1865,6 +1865,7 @@ do -- Cargo
       ["HL_DSHK"] = 6*POSITIONABLE.DefaultInfantryWeight,
       ["CCKW_353"] = 16*POSITIONABLE.DefaultInfantryWeight, --GMC CCKW 2½-ton 6×6 truck, estimating 16 soldiers,
       ["MaxxPro_MRAP"] = 7*POSITIONABLE.DefaultInfantryWeight,
+      ["Sd_Kfz_251"] = 10*POSITIONABLE.DefaultInfantryWeight,
     }
   }